And so, if you have pondered including some sort of Microsoft 70-413 abilities once a message, remember the fact that it does have a defined and intensely authentic valuation. Whether youre thinking about gaining your Microsoft 70-413 official certifications ( Designing and Implementing a Server Infrastructure ) youll be for close to trail in the direction of taking your work to an alternative and amount.
2021 Dec 70-413 study guide
Q11. - (Topic 8)
Your network contains an Active Directory domain named contoso.com. The domain contains three VLANs. The VLANs are configured as shown in the following table.
All client computers run either Windows 7 or Windows 8.
The corporate security policy states that all of the client computers must have the latest security updates installed.
You need to implement a solution to ensure that only the client computers that have all of the required security updates installed can connect to VLAN 1. The solution must ensure that all other client computers connect to VLAN 3.
Solution: You implement the IPsec enforcement method.
Does this meet the goal?
A. Yes
B. No
Answer: B
Explanation: Note: NAP enforcement for IPsec-protected traffic works by providing X.509 certificates, called health certificates, to client computers that meet network health requirements. Health certificates are used to authenticate NAP client computers when they initiate IPsec-protected communications with other computers. Computers that are noncompliant with health requirements do not have health certificates. If a computer that does not have a health certificate initiates communication with a computer that has a health certificate, the connection is not allowed. In this way, NAP with IPsec enforcement restricts noncompliant computers from accessing IPsec-protected resources on the network.
Because IPsec controls host access on a per-connection basis, IPsec enforcement provides the strongest form of NAP enforcement.
Q12. - (Topic 6)
You need to plan the migration of App1. What should you do?
A. Install App1 on drive C. Move all of the data that supports App1 to drive D.
B. Expand the size of drive C Install App1 and all of the data that supports the app on drive C
C. Install App1 on drive D. Move all of the data that supports App1 to an additional data drive.
D. Install App1 on drive C. Move all of the data that supports App1 to an additional data drive.
Answer: C
Q13. - (Topic 3)
You need to recommend changes to the Active Directory site topology to support on the company's planned changes.
What should you include in the recommendation?
A. A new site
B. A new site link bridge
C. A new site link
D. A new subnet
Answer: D
Explanation:
* Scenario:
The forest contains a child domain for each office. An Active Directory site exists for each
office.
* Sites overview
Sites in AD DS represent the physical structure, or topology, of your network. AD DS uses
network topology information, which is stored in the directory as site, subnet, and site link
objects, to build the most efficient replication topology. The replication topology itself
consists of the set of connection objects that enable inbound replication from a source
domain controller to the destination domain controller that stores the connection object.
The Knowledge
Consistency Checker (KCC) creates these connection objects automatically on each
domain controller.
Reference: Understanding Sites, Subnets, and Site Links
http://technet.microsoft.com/en-us/library/cc754697.aspx
Q14. DRAG DROP - (Topic 8)
Your network contains an Active Directory forest named contoso.com.
Your company merges with another company that has an Active Directory forest named
litwareinc.com.
Each forest has one domain.
You establish a two-way forest trust between the forests.
The network contains three servers. The servers are configured as shown in the following table.
You confirm that the client computers in each forest can resolve the names of the client computers in both forests.
On dc1.litwareinc.com, you create a zone named GlobalNames.
You need to recommend changes in both forests to ensure that the users in both forests can resolve single-label names by using the GlobalNames zone in litwareinc.com.
Which changes should you recommend?
To answer, drag the appropriate configuration to the correct server in the answer area. Each configuration may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
Answer:
Q15. DRAG DROP - (Topic 8)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2008 R2. Server1 is a file server.
You deploy a new member server named Server2 that runs Windows Server 2012.
You plan to migrate file shares from Server1 to Server2. File share and NTFS permissions are assigned only to domain local groups.
You need to identify which actions are required to perform the migration.
Which five actions should you identify?
To answer, move the five appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Improved 70-413 pdf exam:
Q16. - (Topic 1)
You implement and authorize the new DHCP servers. You import the server configurations and the scope configurations from PA1 and AM1.
You need to ensure that clients can obtain DHCP address assignments after you shut down PA1 and AM1. The solution must meet the technical requirements.
What should you do?
A. Run the Get-DhcpServerv4Lease cmdlet and the Remove-DhcpServerv4Lease cmdlet. Run the Windows Server Migration Tools.
B. Run the Get-DhcpServerv4Lease cmdlet and the Add-DhcpServerv4Lease cmdlet. Activate the scopes.
C. Run the Get-DhcpServerv4FreeIPAddress cmdlet and the Invoke-DhcpServerv4FailoverReplication cmdlet. Run the Windows Server Migration Tools.
D. Run the Get-DhcpServerv4FreeIPAddress cmdlet and the Invoke-DhcpServerv4FailoverReplication cmdlet Activate the scopes.
Answer: B
Explanation: The Get-DhcpServerv4Lease cmdlet gets one or more lease records from the Dynamic Host Configuration Protocol (DHCP) server service. The Add-DhcpServerv4Lease cmdlet adds a new IPv4 address lease on the Dynamic Host Configuration Protocol (DHCP) server service. This cmdlet is only supported for DHCP server service running on Windows Server. 2012.
Q17. - (Topic 1)
You need to recommend changes to the DNS environment that support the implementation of the sales.contoso.com domain. The solution must ensure that the users in all of the domains can resolve both Internet names and the names of the servers in all of the internal domains.
What should you recommend?
A. On the DNS servers in contoso.com, configure a reverse lookup zone. On the DNS servers in sales.contoso.com, configure a conditional forwarder to contoso.com.
B. On the DNS servers in contoso.com, add a conditional forwarder to the sales.contoso.com zone. On the DNS servers in sales.contoso.com, add a forwarder to the DNS servers of the company's ISP.
C. On the DNS servers in contoso.com, create a zone delegation in the contoso.com zone. On the DNS servers in sales.contoso.com, add a forwarder to the contoso.com DNS servers.
D. On the DNS servers in contoso.com, configure a conditional forwarder to sales.contoso.com. On the DNS servers in sales.contoso.com, configure a reverse zone.
Answer: C
Explanation: Scenario: The client computers in sales.contoso.com will use the sales.contoso.com domain controllers as their DNS servers.
Q18. DRAG DROP - (Topic 8)
Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2008 R2.
You plan to replace the domain controllers with new servers that run Windows Server 2012. The new servers will be named DC3 and DC4.
You need to recommend a strategy to replace DC1 and DC2 with DC3 and DC4. The
solution must minimize the amount of disruption to the users.
Which three actions should you recommend?
To answer, move the appropriate three actions from the list of actions to the answer area
and arrange them in the correct order.
Answer:
Q19. - (Topic 8)
Your network contains 50 servers that run Windows Server 2003 and 50 servers that run Windows Server 2008.
You plan to implement Windows Server 2012.
You need to create a report that includes the following information:
. The servers that run applications and services that can be moved to Windows
Server 2012
. The servers that have hardware that can run Windows Server 2012
. The servers that are suitable to be converted to virtual machines hosted on Hyper-
V hosts that run Windows Server 2012
What should you do?
A. From an existing server, run the Microsoft Application Compatibility Toolkit (ACT).
B. Install Windows Server 2012 on a new server, and then run the Windows Server Migration Tools.
C. Install Windows Server 2012 on a new server, and then run Microsoft Deployment Toolkit (MDT) 2012.
D. From an existing server, run the Microsoft Assessment and Planning (MAP) Toolkit.
Answer: D
Explanation:
The Microsoft Assessment and Planning Toolkit (MAP) is an agentless, automated, multiproduct planning and assessment tool for quicker and easier desktop, server and cloud migrations. MAP provides detailed readiness assessment reports and executive proposals with extensive hardware and software information, and actionable recommendations to help organizations accelerate their IT infrastructure planning process, and gather more detail on assets that reside within their current environment. MAP also provides server utilization data for Hyper-V server virtualization planning; identifying server placements, and performing virtualization candidate assessments, including ROI analysis for server consolidation with Hyper-V. The latest version of the MAP Toolkit adds new scenarios to help you plan your IT future while supporting your current business needs. Included scenarios help you to: Plan your deployment of Windows 8 and Windows Server 2012 with hardware and infrastructure readiness assessments Assess your environment for Office 2013 Plan your migration to Windows Azure Virtual Machines Track Lync Enterprise/Plus usage Size your desktop virtualization needs for both Virtual Desktop Infrastructure (VDI) and session based virtualization using Remote Desktop Services Ready your information platform for the cloud with SQL Server 2012 Virtualize your existing Linux servers onto Hyper-V Identify opportunities to lower your virtualization costs with Hyper-V using the VMware migration assessment MAP is just one of the tools provided by the Microsoft Solution Accelerators team. The Microsoft Assessment and Planning Toolkit, Microsoft Deployment Toolkit, and Security Compliance Manager provide tested guidance and automated tools to help organizations plan, securely deploy, and manage new Microsoft technologies—easier, faster, and at less cost. All are freely available, and fully-supported by Microsoft.
Reference: Microsoft Assessment and Planning Toolkit
Q20. - (Topic 8)
Your network contains an Active Directory domain named contoso.com. The Active Directory site topology is configured as shown in the exhibit. (Click the Exhibit button.)
DC1 and DC2 run Windows Server 2003 R2. All FSMO roles are located on DC2.
You plan to deploy a read-only domain controller (RODC) to Site3.
You need to recommend changes to the network to support the planned RODC
implementation.
What should you recommend?
More than one answer choice may achieve the goal. Select the BEST answer.
A. To Site1, add an RODC that runs Windows Server 2012.
B. Replace DC2 with a domain controller that runs Windows Server 2012.
C. To Site2, add an RODC that runs Windows Server 2012.
D. Replace DC1 with a domain controller that runs Windows Server 2012.
Answer: D
Explanation: Each RODC requires a writable domain controller running Windows Server
2012 for the same domain from which the RODC can directly replicate.
Typically, this requires that a writable domain controller running Windows Server 2012 be
placed in the nearest site in the topology.
Reference: Active Directory Replication Considerations