Microsoft 70-740 Study Guides 2021

NEW QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might
have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2021 Hyper-V environment configured as shown in the following table.

All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
Solution: You implement live migration by using Host3 and Host4. Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 2
You create a Storage Spaces Direct hyper-converged failover cluster. The duster contains three nodes and a 1-TB Storage Spaces Direct volume.
The cluster will store virtual machines.
You plan to extend the volume by adding an additional 3 TB.
What is the minimum amount of extra disk capacity required to accommodate extending the volume?

• A. 3TB on the coordinator node
• B. 3 TB per node
• C. 4 TB per node
• D. 4 TB on the coordinator node

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/drive-symmetry- considerations

NEW QUESTION 3
You have a Nano Server named Nano1.
You deploy several containers to Nano1 that use an image named Image1. You need to deploy a new container to Nano1 that uses Image1.
What should you run?

• A. the Install-NanoServerPackage cmdlet
• B. theInstall-WindowsFeaturecmdlet
• C. the docker load command
• D. the docker run command

Answer: D

NEW QUESTION 4
You have a server named Server1 that is an iSCSI target. You have a server named Server2 that runs
Windows Server 2021. Server2 has an iSCSI disk named Disk1 that is hosted on Server1. Disk1 contains one volume that is assigned a drive letter of E.
You need to increase the size of Disk1. What should you do?

• A. Run the Resize-IscsiVirtualDisk cmdlet and specify the -ComputerName Server2 parameter.
• B. Run the Resize-IscsiVirtualDisk cmdlet and specify the -ComputerName Server1 parameter.
• C. Run the Resize-Partition cmdlet and specify the -ComputerName Server1 parameter.
• D. Run the Resize- Partition cmdlet and specify the -ComputerName Server2 parameter.

Answer: B

Explanation: The Resize-IscsiVirtualDisk cmdlet resizes a virtual disk either by expanding or compacting an existing virtual disk.
The -ComputerName parameter specifies the computer name, or IP address, of the remote computer, if this cmdlet is run on a remote computer. If you do not specify a value for this parameter, the cmdlet uses the local computer.

NEW QUESTION 5
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2021 All domain controllers run Windows Server 2012 R2
Contoso com has the following configuration

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure
device registration You need to configure Active Directory to support the planned deployment. Solution You raise the forest functional level to Windows Server 2012R2.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 6
You deploy a Hyper-V server named Served in an isolated test environment The test environment is prevented from accessing the Internet Server1 runs the Datacenter edition of Windows Server 2021. You plan to deploy the following guest virtual machines on the server

Which activation model should you use for the virtual machines'?

• A. Multiple Activation Key (MAK)
• B. Automatic Virtual Machine Activation (AVMA)
• C. Original Equipment Manufacturer (OEM) key
• D. Key Management Service (KMS)

Answer: B

NEW QUESTION 7
Virtual Network Manager (available from the Hyper-V Manager snap-in) offers three types of virtual networks that you can use to define various networking topologies for virtual machines and the virtualization server.
Which type of virtual network is isolated from all external network traffic on the virtualization server, as well any network traffic between the management operating system and the external network.

• A. Private virtual network
• B. Internal virtual network

Answer: A

NEW QUESTION 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.
Solution: From a command prompt, you run netdom query fsmo. Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation: References: https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmo-roles/

NEW QUESTION 9
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 hosts a virtual
machine named VM1. VM1 is in a workgroup. VM1 is currently in a running state.
You need to create 10 copies of VM1 on Server1 in the least amount of time possible. Which cmdlets should you use?

• A. Stop-VM, and then Import-VM
• B. Export-VM, and then Import-VM
• C. Checkpoint-VM, and then New-VM
• D. Copy-VMFile, and then New-VM

Answer: B

NEW QUESTION 10
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021.
You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1.
You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups.
Solution: You mount the volume to C:Backup, and you format the volume by using NTFS. Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2021.
The settings for VM1 are configured as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You start the Hyper-V Guest Service Interface service on VM1. Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation: References:
https://technet.microsoft.com/en-us/library/dn798297(v=ws.11).aspx

NEW QUESTION 12
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand-alone Hyper- V host named Server1 at a secondary location
A virtual machine named VM1 runs on Cluster1 You configure a Hyper-V Replica of VM1 to Server1 You need to perform a Test Fai lover of VM1. Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management console
• D. the configurehyperv.exe command
• E. the Disk Management console
• F. the Failover Cluster Manager console
• G. the Hyper-V Manager console
• H. the Server Manager Desktop app

Answer: G

NEW QUESTION 13
HOTSPOT
You have a server named Server1 that runs Windows Server 2021 server.
Server1 has the Docker daemon configured and has a container named Container1.
You need to mount the folder C:Folder1 on Server1 to C:ContainerFolder in Container1.
Which command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 14
HOTSPOT
You have a Hyper-V host that runs Windows Server 2021 The Hyper-V host has a virtual machine named VM1
You have a VHD named VHD1 vhdx that has a generalized image of Windows Server 2021. You plan to create multiple virtual machines that will use the generalized image
You need to create differencing disks based on VHD1 vhdx
What command should you run? To answer, select the appropriate options in the answer area

Answer:

Explanation:

NEW QUESTION 15
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a Hyper-V host named Server1 that runs Windows Server 2021 and a two-node scale-out file server cluster named Cluster1
A virtual machine named VM1 runs on Server1
You need to migrate the storage on VM1 to Cluster1 Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management console
• D. the configurehyperv.exe command
• E. the Disk Management console
• F. the Failover Cluster Manager console
• G. the Hyper-V Manager console
• H. the Server Manager Desktop app

Answer: G

NEW QUESTION 16
Note This question is part of a series of questions that use the same scenario. For your convenience,
the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
A company named Contoso, ltd. has several servers that run Windows Server 2021 Contoso has a Hyper V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network, A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company's IT department:
• Deploy failover cluster to two new virtual machines.
• Store all application databases by using Encrypted File System (EFS).
• Ensure that each Windows container has a dedicated IP address assigned by a DHCP server
• Produce a report that lists the processor time used by all of the processes on a server named Server 1 for five hour.
Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
• Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
End of Repeated Scenario.
You need to modify the Hyper V cluster to meet the load balancing requirement for the virtual machine. Which command should you run?

• A. network address translation (NAT)
• B. I2bridge
• C. I2tunnel
• D. transparent

Answer: A

NEW QUESTION 17
You have a server that runs Windows Server 2021 Standard.
You create a new three-way mirror storage space. You format the storage space by using ReFS.
Which two features can you use on the new storage space? Each correct answer presents a complete solution.

• A. file and folder permissions
• B. disk quotas
• C. Encrypting File System (EFS)
• D. long file names
• E. Data Deduplication

Answer: AE

NEW QUESTION 18
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory forest named contoso.com. The forest contains a child domain named eu.contoso.com.
You plan to implement live migration between two Hyper-V hosts that run Windows Server 2021. The hosts are configured as shown in the following table.

You need to ensure that you can perform a live migration of VM1 from Host1 to Host2.
Solution: On Host1 and Host2, you create a private switch named Priv1, and then you connect VM1 to Priv1.
Does meet the goal?

• A. Yes
• B. No

Answer: B