We provide 70-741 exam which are the best for clearing 70-741 test, and to get certified by Microsoft Networking with Windows Server 2021. The 70-741 dumps covers all the knowledge points of the real 70-741 exam. Crack your Microsoft 70-741 Exam with latest dumps, guaranteed!
Check 70-741 free dumps before getting the full version:
NEW QUESTION 1
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. You enable Response Rate Limiting on Server1. You need to prevent Response Rate Limiting from applying to hosts that reside on the network of 10.0.0.0/24. Which cmdlets should you run? To answer, select the appropriate options in the answer area.
Answer:
Explanation: Set-DnsServerResponseRateLimiting
Add-DnsServerResponseRateLimitingExceptionlist
https://docs.microsoft.com/en-us/powershell/module/dnsserver/set-dnsserverresponseratelimiting?view=win10-p
NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2021.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)
Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2. Solution: You run the Repair-DhcpServerv4IPRecord cmdlet.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation: https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope
NEW QUESTION 3
You have a virtual machine named VM1 that runs Windows Server 2021, VM1 hosts a service that requires high network throughput.
VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RDMA), the single root I/O virtualization (SR-IOV) interface, Quality of Service? (QoS), and Receive Side Scaling (RSS).
You need to ensure that the traffic from VM1 can be processed by multiple networking processors. Which Windows PowerShell command should you run on the host of VM1?
- A. Set-NetAdapterRss
- B. Set-NetAdapterRdma
- C. Set-NetAdapterQos
- D. Set-NetAdapterSriov
Answer: A
NEW QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a network administrator for a company named Contoso, Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2. Server2 has the following configured: 
Network address translation (NAT) The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to Server2. You identify the following requirements: Add 28 devices to subnet2 for a temporary project. Configure Server2 to accept VPN connections from the internet. Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2. Which VPN protocol should you configure on Server2?
- A. L2TP
- B. IKEv2
- C. PPTP
- D. SSTP
Answer: C
NEW QUESTION 5
You have an internal network that contains multiple subnets.
You have a Microsoft Azure subscription that contains multiple virtual networks.
You need to deploy a hybrid routing solution between the network and the Azure subscription. The solution must ensure that the computers on all of the networks can connect to each other.
You install RAS Gateway and enable BGP routing on the network and in Azure.
Which three actions should you perform next in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-bgp-resource-manager-ps#enablebgp
NEW QUESTION 6
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2021.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)
Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2. Solution: You run the Set-DhcpServerv4Scope cmdlet.
Does this meet the goal?
- A. Yes
- B. No
Answer: A
Explanation: https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope
NEW QUESTION 7
You have a server named Server1 that runs Windows Server 2021.
Server1 has two network cards. One network card connects to your internal network and the other network card connects to the Internet.
You plan to use Server1 to provide Internet connectivity for client computers on the internal network. You need to configure Server1 as a network address translation (NAT) server.
Which server role or role service should you install on Server1 first?
- A. Network Controller
- B. Web Application Proxy
- C. Routing
- D. DirectAccess and VPN (RAS)
Answer: C
NEW QUESTION 8
You plan to deploy several Hyper-V hosts that run Windows Server 2021. The deployment will use Software defined Networking (SDN) and VXLAN.
Which server role should you install on the network to support the planned deployment?
- A. Network Controller
- B. Network Policy and Access Services
- C. Remote Access
- D. Host Guardian Service
Answer: A
NEW QUESTION 9
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 that runs Windows Server 2021.
Server2 has 10 IPv4 scopes.
You need to ensure that the scopes are backed up every 30 minutes to the folder D:DHCPBackup. What should you run?
- A. dism.exe
- B. dns.exe
- C. dnscmd.exe
- D. netsh.exe
- E. Set-DhcpServerDatabase
- F. Set-DhcpServerv4DnsSetting
- G. Set-DhcpServerv6DnsSetting
- H. Set-DNSServerSetting
Answer: E
NEW QUESTION 10
You have an Active Directory forest that contains 30 servers and 6,000 Client computers. You deploy a new DHCP server that runs Windows Server 2021. You need to retrieve the list of the authorized DHCP servers. Which command should you run?
- A. Get-DHCPServerDatabase
- B. Netstat -p IP -s -a
- C. Get-DHCPServerInDc
- D. Show-ADAuthenticationPolicyExpression -AllowedToAuthenticateTo
Answer: C
Explanation: To get all authorized DHCP servers in Active Directory, you can use the following PowerShell cmdlet:
Get-DhcpServerinDC
NEW QUESTION 11
You have a server named Server1 that runs Windows Server 2021.
You need to deploy the first node cluster of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to answer area and arrange them in the correct order.
Answer:
Explanation: 
NEW QUESTION 12
Refer to Exhibit:
You plan to implement a VPN. FabRA1 will use the RADIUS proxy for authentication.
You need to ensure that VPN clients can be authenticated and can access internal resources. The solution must ensure that FabRS1 is used as a RADIUS server and FabRPl is used as a RADIUS proxy.
Which two actions should you perform? Each correct answer presents part of the solution.
- A. Create a connection request policy on FabRSl.
- B. Create a connection request policy on FabRPl.
- C. Create a network policy on FabRSl.
- D. Delete the default connection request policy on FabRSl.
- E. Create a network policv on FabRPl.
Answer: BC
NEW QUESTION 13
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:
Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM2 to private1 and External1. You install the Remote Access Serverrole on VM2, and you configure NAT in the Routing and Remote Access console. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?
- A. Yes
- B. No
Answer: A
NEW QUESTION 14
Your network contains three subnets, a production subnet that contains production servers, a development network that contains development servers, and a client network that contains client computers.
The development network is used to test applications and reproduces servers that are located on the production network. The development network and the production network use the same IP address range.
A developer has a client computer on the client network. The developer reports that when he attempts to connect to the IP address 10.10.1.6 from his computer, he connects to a server on the production network.
You need to ensure that when the developer connects to 10.10.1.6, he connects to a sever on the development network
Which cmdlet should you use?
- A. New-NetNeighbor
- B. New-NetRoute
- C. Set-NetTcpSetting
- D. Set-NetNeighbir
Answer: B
NEW QUESTION 15
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named adatum.com. The domain contains two DHCP servers named Server1 and Server2.
Server1 has the following IP configuration.
Server2 has the following IP configuration.
Some users report that sometimes they cannot access the network because of conflicting IP addresses. You need to configure DHCP to avoid leasing addresses that are in use already.
Solution: On Server1, you modify the EndRange IP address of the scope. Does this meet the goal?
- A. Yes
- B. No
Answer: A
NEW QUESTION 16
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2021.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the Deployment Server role service, and then you restart the World Wide Web Publishing Service.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION 17
You have a server named Server1 that runs Windows Server 2021. Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network.
You need to get the IP addresses that were assigned to a client computer named Computer1 during the last week.
What should you do on Server1?
- A. Open Event Viewer and click Windows Log
- B. Filter the Security log for Computer1.
- C. From the IPAM node in Server Manager, click Event Catalog, and then review the IP Address Tracking.
- D. Run the Get-IpamDhcpConfigurationEvent cmdlet.
- E. Open Event Viewer and click Windows Log
- F. Filter the Forwarded Events log for Computer1.
Answer: C
Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/ipamserver/get-ipamipaddressauditevent?view=win10-ps
P.S. Surepassexam now are offering 100% pass ensure 70-741 dumps! All 70-741 exam questions have been updated with correct answers: https://www.surepassexam.com/70-741-exam-dumps.html (235 New Questions)