A Review Of Simulation HPE2-T36 Free Practice Test

NEW QUESTION 1
Your customer has multiple c7000 enclosures that will be managed using HPE OneView. At what stage is the license type selected for the enclosures?

• A. after enclosure is updated to the selected firmware baseline
• B. when adding the enclosure to the HPE OneView
• C. when at least one profile is created for this enclosure
• D. after all components are properly discovered in HPE OneView

Answer: D

NEW QUESTION 2
Where would a user click to get a Map View that will easily allow them to see the objects within HPE OneView that are associated with a specific enclosure?

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 3
An administrator is creating a volume template in HPE OneView to manage storage volumes on an HPE 3PAR StoreServ storage system. In addition to the file storage pool and capacity, which parameters in the template must the administrator specify? (Choose two.)

• A. provisioning type
• B. drive type
• C. sharing mode
• D. storage type
• E. deduplication method

Answer: AC

NEW QUESTION 4
A customer creates a server profile template with two new volumes. The first is an 8 GB LUN for the boot drive. The second is a 500 GB LUN for the ESXi cluster shared storage. After the server profiles are assigned to the servers they each have an 8 GB drive and a 500 GB drive but the 500 GB drive isn’t shared across the member nodes within the cluster.
What is the most likely problem with the Server Profile Template?

• A. Mapping multiple LUNs aren’t supported with HPE OneView Server Profile Templates.
• B. Both volumes were created as Private.
• C. The incorrect logical disk type was selected.
• D. ESXi can’t share drives created dynamically via HPE OneView.

Answer: B

NEW QUESTION 5
Match the HPE OneView element to its definition.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 6
Which string value attribute provides information to the REST client about a resource revision?

• A. client cache
• B. URI
• C. eTag
• D. request header

Answer: C

NEW QUESTION 7
What types of activities can be displayed in the Activity section of the HPE OneView UI? (Choose two.)

• A. tasks
• B. alerts
• C. connections
• D. deployments
• E. email notifications

Answer: AB

NEW QUESTION 8
A customer has forgotten the administrator to their HPE OneView appliance. What do they need to provide to HPE support during the password reset process?

• A. License key
• B. HPE Passport login
• C. Request code
• D. Composer serial number

Answer: C

NEW QUESTION 9
Your customer added some Gen10 servers to an environment managed by HPE OneView. The position of the Gen10 servers in the intelligent racks is not automatically detected. What can cause this problem?

• A. Gen10 servers do not support Location Discovery Services.
• B. Location sensor is not enabled for Gen10 servers.
• C. Intelligent Rack is not properly licensed in HPE OneView.
• D. Gen10 servers are mixed with Gen9 or Gen8 servers, which is not supported.

Answer: A

NEW QUESTION 10
You decide to take advantage of HPE OneView’s ability to virtualize unique identifiers. Which physical hardware identifiers are you able to virtualize? (Choose two.)

• A. MAC address
• B. interconnect serial number
• C. CPU serial number
• D. enclosure serial number
• E. World Wide Name

Answer: AE

NEW QUESTION 11
A customer wants to open tickets automatically within ServiceNow from alerts generated within HPE OneView. Which HPE OneView integration will allow the customer to do this?

• A. FTP
• B. HTTP
• C. SSH
• D. REST API

Answer: D

NEW QUESTION 12
An administrator wants to create new volumes using a server profile. What limitations must the administrator consider?

• A. Only private volumes can be created through a server profile.
• B. Volumes created through the server profile cannot be bigger than 1TB.
• C. A volume template must be used to create new volumes using server profile.
• D. Creating shared volumes using server profiles is possible only with Flat SAN implementation.

Answer: A

NEW QUESTION 13
You assign a server profile to an existing BL Gen 8 server within a managed enclosure with Affinity set to “Device Bay + Server Hardware”. What would happen if you replace the server in the enclosure with a new BL Gen 10 server hardware resource?

• A. It will apply the profile if the correct server hardware type is installed.
• B. It will prevent the profile if the server is configured with Secure Boot mode in the BIOS.
• C. It will prevent the profile from being applied if a different server is inserted to that bay.
• D. It will apply the profile if a server with the correct serial number installed.

Answer: B

NEW QUESTION 14
A customer has a large environment with a mixture of HPE ProLiant DLs and BLs. and HPE Apollo devices all reporting to an HPE Oneview appliance in reviewing the devices m Map View, the administrator notices that two Gen6 devices aren't displaying as much information as other managed Gen7 and Gen8 devices.
What is the most likely cause?

• A. The agent on the Gen6 device has stopped reporting data to HPE OneVtew.
• B. Gen6 devices aren't supported by HPE OneView.
• C. Remote support is not configured on the Gen6 devices.
• D. Gen6 devices are only monitored.

Answer: D

NEW QUESTION 15
What tool can you use to provision hosts using server profiles to create or grow a Hyper-V cluster?

• A. HPE Insight Control Server Provisioning
• B. HPE OneView for Microsoft System Center
• C. HPE iLO Virtual Media
• D. Microsoft Operations Manager

Answer: B

NEW QUESTION 16
How does HPE OneView simplify infrastructure management? (Choose two.)

• A. Provides unified platform that supports management across compute, storage, and fabric
• B. Provides industry leading infrastructure security through hardware root of trust
• C. Manages physical servers and virtual machines
• D. Provides integrations with 3rd party infrastructure automation tools through an API driven interface

Answer: AD

NEW QUESTION 17
Which feature of HPE OneView for VMware vCenter enables you to create additional nodes for an existing environment?

• A. REST API
• B. VMware autodeploy
• C. Image Streamer
• D. Grow Cluster

Answer: D

NEW QUESTION 18
What can be used to query the server hardware portion of the HPE OneView appliance database?

• A. SQL Connect Client
• B. REST API
• C. JSON reader
• D. OpenSource Editor

Answer: B

NEW QUESTION 19
Besides SPP's (Service Pack for HPE ProLiant), what else can be uploaded to the firmware repository section in the HPE OneView UI?

• A. operating system patch
• B. third party drivers
• C. Support Dump
• D. Smart Component

Answer: D

NEW QUESTION 20
In addition to the REST client, what is another way to access the HPE REST APIs? (Choose two.)

• A. Windows PowerShell
• B. Unified Extensible Firmware Interface (UEFI)
• C. Native BASH Linux shell
• D. cURL command line utility
• E. PuTTY client

Answer: CD

NEW QUESTION 21
Which information is required to integrate HPE OneView authentication with OpenLDAP server? (Choose two.)

• A. organizational unit
• B. domain component
• C. common name
• D. base DN
• E. group CN

Answer: AD

NEW QUESTION 22
Your customer would like to manage HPE BladeSystems and some rack servers using HPE OneView and is concerned about system availability. How should you respond to this concerned customer?

• A. HPE OneView has a built-in high availability mechanism that can be enabled with an additional license
• B. HPE Global Dashboard can be used to enable HPE OneView high availability
• C. HPE OneView can be deployed to a hypervisor cluster to provide high availability
• D. HPE OneView can be connected to two different databases to provide high availability

Answer: C

NEW QUESTION 23
Refer to the exhibit.

What is the PowerShell command to create an Ethernet Network resource?

• A. New-HPOVNetwork -Name "ProdNet 100" -Vlanld 100
• B. New-HPOVuplinkSet -Name "ProdNet 100" -Networks (Get-HPOVNetwork -Name "ProdNet 100")
• C. Get-HPOVNetwork -Name "ProdNet 100" | New-HPOVServerProfileConnection -ConnectionID 1-Name "ProdNet 100"
• D. New-HPOVNetworkSet -Name "ProdNet 100"

Answer: A

NEW QUESTION 24
Where would you go in the HPE OneView Main Menu to access information about the environment status that can be exported to csv?

• A. Reports
• B. Dashboard
• C. Data Centers
• D. Activity

Answer: A

NEW QUESTION 25
......