Cause all that matters here is passing the Juniper JN0-533 exam. Cause all that you need is a high score of JN0-533 FWV, Specialist (JNCIS-FWV) exam. The only one thing you need to do is downloading Pass4sure JN0-533 exam study guides now. We will not let you down with our money-back guarantee.

2016 Nov JN0-533 exam engine

Q51. What is a virtual system? 

A. a mechanism to logically partition a single ScreenOS device into multiple logical devices 

B. a collection of subnets and interfaces sharing identical security requirements 

C. a method of providing a secure connection across a network 

D. a tool to protect against DoS attacks 

Answer:


Q52. Click the Exhibit button. 

You configure NAT on your ScreenOS device to route the services shown in the exhibit to the internal addresses. Which commands will you use to configure this scenario? 

A. ssg5-> set interface ethernet3 vip 1.1.1.3 53 dns 10.1.1.3 ssg5-> set interface ethernet3 vip 1.1.1.3 80 http 10.1.1.4 ssg5-> set interface ethernet3 vip 1.1.1.3 5983 ldap 10.1.1.4 ssg5-> set interface ethernet3 vip 1.1.1.3 5631 pcanywhere 10.1.1.5 ssg5-> set interface ethernet3 mip 1.1.1.3 53 dns 10.1.1.3 

B. ssg5-> set interface ethernet3 mip 1.1.1.3 80 http 10.1.1.4 ssg5-> set interface ethernet3 mip 1.1.1.3 5631 pcanywhere 10.1.1.4 ssg5-> set interface ethernet3 mip 1.1.1.3 5983 ldap 10.1.1.5 ssg5-> set interface ethernet3 dip 1.1.1.3 53 dns 10.1.1.3 

C. ssg5-> set interface ethernet3 dip 1.1.1.3 80 http 10.1.1.4 ssg5-> set interface ethernet3 dip 1.1.1.3 5631 pcanywhere 10.1.1.4 ssg5-> set interface ethernet3 dip 1.1.1.3 5983 ldap 10.1.1.5 ssg5-> set interface ethernet3 vip 1.1.1.3 53 dns 10.1.1.3 

D. ssg5-> set interface ethernet3 vip 1.1.1.3 80 http 10.1.1.4 ssg5-> set interface ethernet3 vip 1.1.1.3 5631 pcanywhere 10.1.1.4 ssg5-> set interface ethernet3 vip 1.1.1.3 5983 ldap 10.1.1.5 

Answer:


Q53. You have two interfaces in ZoneA and traffic is passing without any policy configured. You want to control the traffic between the two interfaces. 

Which two actions will allow this to happen? (Choose two.) 

A. Configure interzone blocking on ZoneA and create a policy in that zone to control the traffic. 

B. Configure intrazone blocking on ZoneA and create a policy in that zone to control the traffic. 

C. Move one of the interfaces to a different zone and create an interzone policy to control the traffic. 

D. Move one of the interfaces to a different zone and create an intrazone policy to control the traffic. 

Answer: B,C 


Q54. Click the Exhibit button. 

Network traffic with a source IP of 192.168.100.60, destination IP of 8.8.8.8, and a destination port of 80 is sent through the ScreenOS device. The inbound zone is Trust, the outbound zone is Untrust. 

Based on the policy configuration shown in the exhibit, what happens to this traffic? 

A. The traffic is denied by default policy. 

B. Traffic is denied by policy ID 3. 

C. Traffic is permitted by the global policy. 

D. Traffic is permitted by policy ID 2. 

Answer:


Q55. Your ScreenOS device is using NAT. 

Which NAT function allows you to use a single IP address from an untrust zone to communicate to multiple IP addresses in a trust zone? 

A. NAT-src with PAT enabled 

B. NAT-dst with PAT enabled 

C. NAT-src using a DIP pool with PAT enabled 

D. NAT-dst using a DIP pool with PAT disabled 

Answer:


Replace JN0-533 free draindumps:

Q56. You are using interface-based NAT for traffic passing from the trust zone to the untrust zone. 

What will occur? 

A. The source IP address is not translated. 

B. The source IP address is translated to the trust interface IP address. 

C. The network address and port translation (NAPT) is performed on the loopback interface. 

D. The source IP address is translated to the untrust interface IP address. 

Answer:


Q57. You must translate a range of public IP addresses to a range of internal IP addresses. 

Which two mechanisms would you use to accomplish your objective? (Choose two.) 

A. MIP using masks 

B. VIP using masks 

C. policy-based NAT-dst 

D. policy-based NAT-src 

Answer: A,C 


Q58. Which NAT has bidirectional translation by default? 

A. NAT-src 

B. NAT-dst 

C. VIP 

D. MIP 

Answer:


Q59. Which two configuration elements are synchronized between the members of an NSRP cluster? (Choose two.) 

A. interface IP addresses 

B. hostname 

C. track IP configuration 

D. static routes 

Answer: A,D 


Q60. What are three valid states for an NSRP member? (Choose three.) 

A. backup 

B. feasible successor 

C. ineligible 

D. master 

E. standby 

Answer: A,C,D