Act now and download your Juniper JN0-633 test today! Do not waste time for the worthless Juniper JN0-633 tutorials. Download Replace Juniper Security, Professional (JNCIP-SEC) exam with real questions and answers and begin to learn Juniper JN0-633 with a classic professional.
2021 Mar JN0-633 download
Q91. You are asked to change the configuration of your company's SRX device so that you can block nested traffic from certain Web sites, but the main pages of these Web sites must remain available to users.Which two methods will accomplish this goal? (Choose two.)
A. Enable the HTTP ALG.
B. Implement a firewall filter for Web traffic.
C. Use an IDP policy to inspect the Web traffic.
D. Configure an application firewall rule set.
Answer: B,D
Explanation: Reference: An application layer gateway (ALG) is a feature on ScreenOS gateways that enables the gateway to parse application layer payloads and take decisions on them.ALGs are typically employedto support applications that use the application layer payload to communicate the dynamic Transmission Control Protocol (TCP) or User Datagram Protocol (UDP) ports on which the applications open data connections (http://kb.juniper.net/InfoCenter/index?page=content&id=KB13530)
IDP policy defines the rule for defining the type of traffic permittedon network(http://www.juniper.net/techpubs/software/junos-security/junos-security95/junos-security-swconfig-security/enable-idp-security-policy-section.html)
Q92. Which two configuration components are required for enabling transparent mode on an SRX device? (Choose two.)
A. IRB
B. bridge domain
C. interface family bridge
D. interface family ethernet-switching
Answer: B,C
Explanation: Reference: http://kb.juniper.net/InfoCenter/index?page=content&id=KB21421
Q93. You are using the AppDoS feature to control against malicious bot client attacks. The bot clients are using file downloads to attack your server farm. You have configured a context value rate of 10,000 hits in 60 seconds.At which threshold will the bot clients no longer be classified as malicious?
A. 5000 hits in 60 seconds
B. 8000 hits in 60 seconds
C. 7500 hits in 60 seconds
D. 9999 hits in 60 seconds
Answer: B
Explanation: Reference :
http://www.juniper.net/techpubs/software/junos-security/junos-security10.0/junos-security-swconfig-security/appddos-protection-overview.html
Q94. You are asked to configure class of service (CoS) on an SRX device running in transparent mode. Which command would you use?
A. set interfaces ge-0/0/0 unit 0 classifiers dscp priority-app
B. set class-of-service interfaces ge-0/0/0 unit 0 classifiers dscp priority-app
C. set class-of-service interfaces ge-0/0/0 unit 0 classifiers ieee-802.1 priority-app
D. set interfaces ge-0/0/0 unit 0 classifiers inet-precedence priority-app
Answer: C
Explanation: Reference: http://kb.juniper.net/InfoCenter/index?page=content&id=KB23234
Q95. Where does the AppSecure suite of functions occur in the security flow process on an SRX Series device?
A. services
B. security policy
C. NAT
D. session initiation
Answer: A
Most up-to-date JN0-633 question:
Q96. You have configured an IPsec VPN with traffic selectors; however, your IPsec tunnel does not appear to be working properly.
What are two reasons for the problem? (Choose two.)
A. You are configured a remote address value of 0.0.0.0/0.
B. You are trying to use traffic selectors with policy-based VPNs.
C. You have configured 15 traffic selectors on each SRX Series device.
D. You are trying to use traffic selectors with route-based VPNs.
Answer: A,B
Q97. Click the Exhibit button.
[edit security nat static rule-set 12] user@SRX2# show
from zone untrust; rule 1 {
match {
destination-address 192.168.1.1/32;
}
then { static-nat { prefix {
10.60.60.1/32;
}
}
}
}
Host-2 initiates communication with Host-1. All other routing and policies are in place to allow the traffic.
What is the result of the communication?
A. The 192.168.0.1 address is translated to the 10.60.60.1 address.
B. The 10.60.60.1 address is translated to the 192.168.1.1 address.
C. No translation occurs.
D. The 192.168.0.1 address is translated to the 192.168.1.1 address.
Answer: B
Q98. Your company is using a dynamic VPN configuration on their SRX device. Your manager asks you to enforce password expiration policies for all VPN users.
Which authentication method meets the requirement?
A. local password database
B. TACACS+
C. RADIUS
D. LDAP
Answer: D
Explanation:
Reference : http://kb.juniper.net/InfoCenter/index?page=content&id=KB17423&actp=RSS
Q99. Which statement is true regarding destination NAT?
A. Destination NAT changes the content of the source IP address field.
B. Destination NAT changes the content of the destination IP address field.
C. Destination NAT matches on the destination IP address and changes the source IP address.
D. Destination NAT matches on the destination IP address and changes the source port.
Answer: B
Q100. Given the following session output:
Session ID., Policy namE.default-policy-00/2, StatE.Active, Timeout: 1794, Valid
In: 2001:660:1000:8c00::b/1053 --> 2001:660:1000:9002::aafe/80;tcp, IF.reth0.0, Pkts: 4,
Bytes: 574
Out: 192.168.203.10/80 --> 192.168.203.1/24770;tcp, IF.reth1.0, Pkts: 3, Bytes:
Which statement is correct about the security flow session output?
A. This session is about to expire.
B. NAT64 is used.
C. Proxy NDP is used for this session.
D. The IPv4 Web server runs services on TCP port 24770.
Answer: B
Explanation:
Reference :http://kb.juniper.net/InfoCenter/index?page=content&id=KB22391