Our pass rate is high to 98.9% and the similarity percentage between our 2V0-41.23 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the VMware 2V0-41.23 exam in just one try? I am currently studying for the VMware 2V0-41.23 exam. Latest VMware 2V0-41.23 Test exam practice questions and answers, Try VMware 2V0-41.23 Brain Dumps First.

Online 2V0-41.23 free questions and answers of New Version:

NEW QUESTION 1
What is the VMware recommended way to deploy a virtual NSX Edge Node?

  • A. Through the OVF command line tool
  • B. Through the vSphere Web Client
  • C. Through automated or Interactive mode using an ISO
  • D. Through the NSXUI

Answer: D

Explanation:
Through the NSX UI. According to the VMware NSX Documentation2, you can deploy NSX Edge nodes as virtual appliances through the NSX UI by clicking Add Edge Node and providing the required information. The other options are either outdated or not applicable for virtual NSX Edge nodes.
https://docs.vmware.com/en/VMware-NSX/4.1/installation/GUID-E9A01C68-93E7-4140-B306-19CD6806199

NEW QUESTION 2
Refer to the exhibits.
Drag and drop the NSX graphic element icons on the left found in an NSX Intelligence visualization graph to Its correct description on the right.
2V0-41.23 dumps exhibit


Solution:
https://docs.vmware.com/en/VMware-NSX-Intelligence/4.0/user-guide/GUID-DC78552B-2CC4-410D-A6C9-3

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 3
How does the Traceflow tool identify issues in a network?

  • A. Compares the management plane configuration states containing control plane traffic and error reporting from transport node agents.
  • B. Compares intended network state in the control plane with Tunnel End Point (TEP) keepalives in the data plane.
  • C. Injects ICMP traffic into the data plane and observes the results in the control plane.
  • D. Injects synthetic traffic into the data plane and observes the results in the control plane.

Answer: D

Explanation:
The Traceflow tool identifies issues in a network by injecting synthetic traffic into the data plane and observing the results in the control plane. This allows the tool to identify any issues in the network and provide a detailed report on the problem. You can use the Traceflow tool to test connectivity between any two endpoints in your NSX-T Data Center environment.

NEW QUESTION 4
The security administrator turns on logging for a firewall rule. Where is the log stored on an ESXi transport node?

  • A. /var/log/vmware/nsx/firewall.log
  • B. /var/log/messages.log
  • C. /var/log/dfwpktlogs.log
  • D. /var/log/fw.log

Answer: C

Explanation:
The log for a firewall rule on an ESXi transport node is stored in the /var/log/dfwpktlogs.log file. This file contains information about the packets that match or do not match the firewall rules, such as the source and destination IP addresses, ports, protocols, actions, and rule IDs. The log file can be viewed using the esxcli network firewall get command or the vSphere Client.
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-D57429A1-A0A9-42BE-A

NEW QUESTION 5
What are two valid BGP Attributes that can be used to influence the route path traffic will take? (Choose two.)

  • A. AS-Path Prepend
  • B. BFD
  • C. Cost
  • D. MED

Answer: AD

Explanation:
2V0-41.23 dumps exhibit AS-Path Prepend: This attribute allows you to prepend one or more AS numbers to the AS path of a route, making it appear longer and less preferable to other BGP routers. You can use this attribute to manipulate the inbound traffic from your BGP peers by advertising a longer AS path for some routes and a shorter AS path for others .
2V0-41.23 dumps exhibit MED: This attribute stands for Multi-Exit Discriminator and allows you to specify a preference value for a route among multiple exit points from an AS. You can use this attribute to manipulate the outbound traffic to your BGP peers by advertising a lower MED value for some routes and a higher MED value for others .

NEW QUESTION 6
Which three NSX Edge components are used for North-South Malware Prevention? (Choose three.)

  • A. Thin Agent
  • B. RAPID
  • C. Security Hub
  • D. IDS/IPS
  • E. Security Analyzer
  • F. Reputation Service

Answer: BCD

Explanation:
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-69DF70C2-1769-4858-97E7-B757CAED

NEW QUESTION 7
Where is the insertion point for East-West network introspection?

  • A. Tier-0 router
  • B. Partner SVM
  • C. Guest VM vNIC
  • D. Host Physical NIC

Answer: C

Explanation:
The insertion point for East-West network introspection is the Guest VM vNIC. Network introspection is a service insertion feature that allows third-party network services to be integrated with NSX. Network introspection enables traffic redirection from the Guest VM vNIC to a service virtual machine (SVM) that runs the partner service. The SVM can then inspect, monitor, or modify the traffic before sending it back to the original destination1. The other options are incorrect because they are not the insertion points for East-West network introspection. The Tier-0 router is used for North-South routing and network services. The partner SVM is the service virtual machine that runs the partner service, not the insertion point. The host physical NIC is not involved in network introspection. References: Network Introspection Settings

NEW QUESTION 8
Which is an advantages of a L2 VPN In an NSX 4.x environment?

  • A. Enables Multi-Cloud solutions
  • B. Achieve better performance
  • C. Enables VM mobility with re-IP
  • D. Use the same broadcast domain

Answer: D

Explanation:
L2 VPN is a feature of NSX that allows extending Layer 2 networks across different sites or clouds over an IPsec tunnel. L2 VPN has an advantage of enabling VM mobility with re-IP, which means that VMs can be moved from one site to another without changing their IP addresses or network configurations. This is possible because L2 VPN allows both sites to use the same broadcast domain, which means that they share the same subnet and VLAN .

NEW QUESTION 9
An administrator wants to validate the BGP connection status between the Tier-O Gateway and the upstream physical router.
What sequence of commands could be used to check this status on NSX Edge node?

  • A. set vrf <ID>show logical-routers show <LR-D> bgp
  • B. show logical-routers get vrfshow ip route bgp
  • C. get gateways vrf <number>get bgp neighbor
  • D. enable <LR-D> get vrf <ID>show bgp neighbor

Answer: C

Explanation:
The sequence of commands that could be used to check the BGP connection status between the Tier-O Gateway and the upstream physical router on NSX Edge node is get gateways, vrf <number>, get bgp neighbor. These commands can be executed on the NSX Edge node CLI after logging in as admin6. The firs command, get gateways, displays the list of logical routers (gateways) configured on the Edge node, along with their IDs and VRF numbers7. The second command, vrf <number>, switches to the VRF context of the desired Tier-O Gateway, where <number> is the VRF number obtained from the previous command7. The third command, get bgp neighbor, displays the BGP neighbor summary for the selected VRF, including the neighbor IP address, AS number, state, uptime, and prefixes received8. The other options are incorrect because they either use invalid or incomplete commands or do not switch to the correct VRF
context. References: NSX-T Command-Line Interface Reference, NSX Edge Node CLI Commands, Troubleshooting BGP on NSX-T Edge Nodes

NEW QUESTION 10
What are two supported host switch modes? (Choose two.)

  • A. DPDK Datapath
  • B. Enhanced Datapath
  • C. Overlay Datapath
  • D. Secure Datapath
  • E. Standard Datapath

Answer: BE

Explanation:
The host switch modes determine how the NSX network and security stack is allocated on the underlying host CPU or DPU. There are two supported host switch modes: Enhanced Datapath and Standard
Datapath1. Enhanced Datapath mode leverages the DPU to offload the NSX datapath processing from the host CPU, while Standard Datapath mode uses the host CPU for the NSX datapath processing1. DPDK Datapath, Overlay Datapath, and Secure Datapath are not valid host switch modes for NSX 4.x. References: NSX Features

NEW QUESTION 11
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?

  • A. esxcli network diag ping -I vmk0O -H <destination IP address>
  • B. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
  • C. esxcli network diag ping -H <destination IP address>
  • D. vmkping ++netstack=vxlan -d -s 1572 <destination IP address>

Answer: B

Explanation:
The command vmkping ++netstack=geneve -d -s 1572 <destination IP address> is used to check the VMwar kernel ports for tunnel end point communication. This command uses the geneve netstack, which is the default netstack for NSX-T. The -d option sets the DF (Don’t Fragment) bit in the IP header, which prevents the packet from being fragmented by intermediate routers. The -s 1572 option sets the packet size to 1572 bytes, which is the maximum payload size for a geneve encapsulated packet with an MTU of 1600 bytes.
The <destination IP address> is the IP address of the remote ESXi host or VM. References: : VMware NS Data Center Installation Guide, page 19. : VMware Knowledge Base: Testing MTU with the vmkping command (1003728). : VMware NSX-T Data Center Administration Guide, page 102.

NEW QUESTION 12
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events. Which message ID (msgld) should be used in the syslog export configuration command as a filler?

  • A. MONISTORING
  • B. SYSTEM
  • C. GROUPING
  • D. FABRIC

Answer: D

Explanation:
According to the VMware NSX Documentation2, the FABRIC message ID (msgld) captures messages related to NSX host preparation events, such as installation, upgrade, or uninstallation of NSX components on ESXi hosts. The syslog export configuration command for NSX host preparation events would look something like this:
set service syslog export FABRIC
The other options are either incorrect or not relevant for NSX host preparation events. MONITORING captures messages related to NSX monitoring features, such as alarms and system events2. SYSTEM captures messages related to NSX system events, such as login, logout, or configuration changes2. GROUPING captures messages related to NSX grouping objects, such as security groups, security tags, or IP sets2.
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-CC18C0E3-D076-41AA-8B8C-133650FD

NEW QUESTION 13
Which two statements are true about IDS Signatures? (Choose two.)

  • A. Users can upload their own IDS signature definitions.
  • B. An IDS signature contains data used to identify known exploits and vulnerabilities.
  • C. An IDS signature contains data used to identify the creator of known exploits and vulnerabilities.
  • D. IDS signatures can be High Risk, Suspicious, Low Risk and Trustworthy.
  • E. An IDS signature contains a set of instructions that determine which traffic is analyzed.

Answer: BE

Explanation:
According to the Network Bachelor article1, an IDS signature contains data used to identify an attacker’s attempt to exploit a known vulnerability in both the operating system and applications. This implies that statement B is true. According to the VMware NSX Documentation2, IDS/IPS Profiles are used to group signatures, which can then be applied to select applications and traffic. This implies that statement E is
true. Statement A is false because users cannot upload their own IDS signature definitions, they have to use the ones provided by VMware or Trustwave3. Statement C is false because an IDS signature does not contain data used to identify the creator of known exploits and vulnerabilities, only the exploits and vulnerabilities themselves. Statement D is false because IDS signatures are classified into one of the following severity categories: Critical, High, Medium, Low, or Informational1.

NEW QUESTION 14
Which choice is a valid insertion point for North-South network introspection?

  • A. Guest VM vNIC
  • B. Partner SVM
  • C. Tier-0 gateway
  • D. Host Physical NIC

Answer: C

Explanation:
A valid insertion point for North-South network introspection is Tier-0 gateway. North-South network introspection is a service insertion feature that allows third-party network services to be integrated with
NSX. North-South network introspection enables traffic redirection from the uplink of an NSX Edge node to a service chain that consists of one or more service profiles1. The Tier-0 gateway is the logical router that connects the NSX Edge node to the physical network and provides North-South routing and network
services2.
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-D5933474-34A2-4DCE-AE9B-A82FF33

NEW QUESTION 15
A security administrator needs to configure a firewall rule based on the domain name of a specific application. Which field in a distributed firewall rule does the administrator configure?

  • A. Profile
  • B. Service
  • C. Policy
  • D. Source

Answer: A

Explanation:
To configure a firewall rule based on the domain name of a specific application, the administrator needs to use the Profile field in a distributed firewall rule. The Profile field allows the administrator to select a context profile that contains one or more attributes for filtering traffic. One of the attributes that can be used is Domain (FQDN) Name, which specifies the fully qualified domain name of the application. For example, if the administrator wants to filter traffic to *.office365.com, they can create a context profile with the Domain (FQDN) Name attribute set to *.office365.com and use it in the Profile field of the firewall rule.
References:
2V0-41.23 dumps exhibit Filtering Specific Domains (FQDN/URLs)
2V0-41.23 dumps exhibit FQDN Filtering

NEW QUESTION 16
Which two logical router components span across all transport nodes? (Choose two.)

  • A. SFRVICE_ROUTER_TJER0
  • B. TIERO_DISTRI BUTE D_ ROUTER
  • C. DISTRIBUTED_R0UTER_TIER1
  • D. DISTRIBUTED_ROUTER_TIER0
  • E. SERVICE_ROUTER_TIERl

Answer: CD

Explanation:
https://docs.vmware.com/en/VMware-Validated-Design/5.0.1/com.vmware.vvd.sddc-nsxt-design.doc/GUID-74

NEW QUESTION 17
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?

  • A. get timezone
  • B. get time-server
  • C. set timezone
  • D. set ntp-server

Answer: D

Explanation:
The CLI command on NSX Manager and NSX Edge that is used to change NTP settings is set ntp-server. Th command allows the user to configure one or more NTP servers for time synchronization12. The other options are incorrect because they are not valid CLI commands for changing NTP settings. The get timezone and timezone commands are used to display and configure the timezone of the system1. The get
time-server command is used to display the current time server configuration1. There are no CLI commands for using RADIUS or BootP for NTP settings. References: NSX-T Command-Line Interface
Reference, vSphere ESXi 7.0 U3 and later versions NTP configuration steps

NEW QUESTION 18
What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)

  • A. DFW
  • B. Tier-1 Gateway
  • C. Segment
  • D. Segment Port
  • E. Group

Answer: CE

Explanation:
* C. Segment. This is correct. A segment is a logical construct that represents a layer 2 broadcast domain and a layer 3 subnet in NSX. A segment can be used to group and connect virtual machines, containers, or bare metal hosts that belong to the same application or service. A segment can also be used as the scope of a distributed firewall rule, which means that the rule will apply to all the traffic that enters or exits the segment12
* E. Group. This is correct. A group is a logical construct that represents a collection of objects in NSX, such as segments, segment ports, virtual machines, IP addresses, MAC addresses, tags, or security policies. A group can be used to define dynamic membership criteria based on various attributes or filters. A group can also be used as the scope of a distributed firewall rule, which means that the rule will apply to all the traffic that matches the group membership criteria32

NEW QUESTION 19
......

P.S. Easily pass 2V0-41.23 Exam with 106 Q&As Dumpscollection.com Dumps & pdf Version, Welcome to Download the Newest Dumpscollection.com 2V0-41.23 Dumps: https://www.dumpscollection.net/dumps/2V0-41.23/ (106 New Questions)