Cause all that matters here is passing the Check Point 156-115.77 exam. Cause all that you need is a high score of 156-115.77 Check Point Certified Security Master exam. The only one thing you need to do is downloading Ucertify 156-115.77 exam study guides now. We will not let you down with our money-back guarantee.

2021 Nov 156-115.77 actual test

Q141. - (Topic 8) 

A firewall has 8 CPU cores and the correct license. CoreXL is enabled. How could you set kernel instance #3 to run on processing core #5? 

A. This is not possible CoreXL is best left to manage the Kernel to CPU core mappings. It is only when a daemon is bound to a dedicated core that CoreXL will ignore that CPU core when mapping Kernel instances to CPU cores. 

B. fw ctl affinity -s -k 3 5 

C. Run fwaffinity_apply –t 3 -k 5 and then check that the settings have taken affect with the command fw ctl multik stat. 

D. Edit the file fwaffinity.conf and add the line “k3 cpuid 5” 

Answer: B 


Q142. - (Topic 7) 

Misha is working on a stand-by firewall and deletes the connections table in error. He finds that now the table is out of sync with the Active member. to get them completely synced again, Mish should run the command pair ____________ and __________ . 

A. fw ctl sync stop, fw ctl sync start 

B. fw ctl setsync off, fw ctl setsync start 

C. fw ctl setsync stop, fw ctl setsync on 

D. fw ctl setsync off, fw ctl setsync on 

Answer: B 

183. - (Topic 7) 

If the number of Firewall Workers for CoreXL is set higher on one member of a cluster than the other, the cluster will be in what state? 

A. Active/Standby 

B. Active/Ready 

C. Active Attention/Down 

D. Active/Down 

Answer: B 


Q143. - (Topic 10) 

Which of these commands can be used to display the IPv6 routes? 

A. show route 

B. show ipv6 route 

C. show routes all D. show route ipv6 

Answer: B 


Q144. - (Topic 8) 

When troubleshooting a performance problem on multicore firewall that is using CoreXL, what command checks the number of connections each core is processing? 

A. sim affinity -l 

B. cat fwkern.conf 

C. fw CTL pstat 

D. fw ctl multik stat 

Answer: D 


Q145. - (Topic 5) 

What is the command to check how many connections the firewall has detected for the SecureXL device? 

A. fw tab –t connections –s 

B. fw tab -t cphwd_db –s 

C. fw tab –t connection –s | grep template 

D. fwaccel conns 

Answer: B 


Up to the immediate present 156-115.77 actual test:

Q146. - (Topic 6) 

You find that your open server SecurePlatform system is lagging although you know you have plenty of memory and the complexity of the Rule Base has not changed significantly. You think that upgrading the CPU frequency speed could help your performance. Which command could help you see what speed and model of CPU you are using? 

A. top 

B. sysconfig 

C. cat /proc/cpuinfo 

D. fw tab 

Answer: C 


Q147. - (Topic 5) 

In order to perform some connection troubleshooting, you run the command fw monitor –e accept dport = 443. You do NOT see the TCP ACK packet. Why is this? 

A. The connection is encrypted. 

B. The connection is NATted. 

C. The connection is dropped. 

D. The connection is accelerated. 

Answer: D 


Q148. - (Topic 11) 

Which Dynamic Routing Protocols are supported in GAiA in a Route-based VPN configuration? 

A. OSPF,BGP 

B. OSPF 

C. OSPF,BGP,RIPv2 

D. OSPF,BGP,RIPv1,RIPv2 

Answer: A 


Q149. - (Topic 10) 

What is the length of an IPv6 address? 

A. 128 Bytes 

B. 54 bits 

C. 128 bits 

D. 6 Bytes 

Answer: C 


Q150. - (Topic 11) 

What is the prefix name for the interface when creating an unnumbered VTI in GAIA? 

A. VTii 

B. tun 

C. vpnt 

D. VTI 

Answer: C