we provide Certified Check Point 156-915.80 exam engine which are the best for clearing 156-915.80 test, and to get certified by Check Point Check Point Certified Security Expert Update - R80. The 156-915.80 Questions & Answers covers all the knowledge points of the real 156-915.80 exam. Crack your Check Point 156-915.80 Exam with latest dumps, guaranteed!

P.S. Certified 156-915.80 courses are available on Google Drive, GET MORE: https://drive.google.com/open?id=10nZGq46vgX7-YMephRQOtbIjmfJ8w6LL


New Check Point 156-915.80 Exam Dumps Collection (Question 8 - Question 16)

Q8. After implementing Static Address Translation to allow Internet traffic to an internal Web Server on your DMZ, you notice that any NATed connections to that machine are being dropped by anti-spoofing protections. Which of the following is the MOST LIKELY cause?

A. The Global Properties setting Translate destination on client side is unchecked. But the topology on the DMZ interface is set to Internal - Network defined by IP and Mask. Check the Global Properties setting Translate destination on client side.

B. The Global Properties setting Translate destination on client side is unchecked. But the topology on the external interface is set to Others +. Change topology to External.

C. The Global Properties setting Translate destination on client side is checked. But the topology on the external interface is set to External. Change topology to Others +.

D. The Global Properties setting Translate destination on client side is checked. But the topology on the DMZ interface is set to Internal - Network defined by IP and Mask. Uncheck the Global Properties setting Translate destination on client side.

Answer: A


Q9. Review the rules.

Assume domain UDP is enabled in the impled rules.

What happens when a user from the internal network tries to browse to the internet using HTTP? The user:

A. can connect to the Internet successfully after being authenticated.

B. is prompted three times before connecting to the Internet successfully.

C. can go to the Internet after Telnetting to the client authentication daemon port 259.

D. can go to the Internet, without being prompted for authentication.

Answer: D


Q10. If you need strong protection for the encryption of user data, what option would be the BEST choice?

A. Use Diffie-Hellman for key construction and pre-shared keys for Quick Mode. Choose SHA in Quick Mode and encrypt with AES. Use AH protocol. Switch to Aggressive Mode.

B. When you need strong encryption, IPsec is not the best choice. SSL VPNu2021s are a better choice.

C. Use certificates for Phase 1, SHA for all hashes, AES for all encryption and PFS, and use ESP protocol.

D. Disable Diffie-Hellman by using stronger certificate based key-derivation. Use AES-256 bit on all encrypted channels and add PFS to QuickMode. Use double encryption by implementing AH and ESP as protocols.

Answer: C


Q11. What command syntax would you use to turn on PDP logging in a distributed environment?

A. pdp track=1

B. pdp tracker on

C. pdp logging on

D. pdp log=1

Answer: B


Q12. You want to generate a cpinfo file via CLI on a system running GAiA. This will take about 40 minutes since the log files are also needed. What action do you need to take regarding timeout?

A. No action is needed because cpshell has a timeout of one hour by default.

B. Log in as the default user expert and start cpinfo.

C. Log in as admin, switch to expert mode, set the timeout to one hour with the command, idle 60, then start cpinfo.

D. Log in as Administrator, set the timeout to one hour with the command idle 60 and start cpinfo.

Answer: D


Q13. Which command would provide the most comprehensive diagnostic information to Check Point Technical Support?

A. fw cpinfo

B. cpinfo -o date.cpinfo.txt

C. diag

D. cpstat - date.cpstat.txt

Answer: B


Q14. What mechanism does a gateway configured with Identity Awareness and LDAP initially use to communicate with a Windows 2003 or 2008 server?

A. WMI

B. CIFS

C. RCP

D. LDAP

Answer: A


Q15. Fill in the blank with a numeric value. The default port number for standard TCP connections with the LDAP server is

Answer:

389


Q16. Type the full fw command and syntax that will show full synchronization status.

Answer:

fw ctl pstat


P.S. Easily pass 156-915.80 Exam with 2passeasy Certified Dumps & pdf vce, Try Free: https://www.2passeasy.com/dumps/156-915.80/ ( New Questions)