Citrix 1Y0-230 Exam Dumps 2021

NEW QUESTION 1
Scenario: A Citrix Administrator is performing a disaster recovery test and decided to fail over the NetScaler high availability (HA) pair appliances. The administrator noticed that the failover is NOT working as expected in item text, and the Secondary NetScaler is NOT taking over as Primary. The administrator suspects that networking issues may be causing the failure.
What could be the cause of this issue with the NetScalers?

• A. HA monitoring is enabled on a disabled interface of the Primary Node
• B. HA monitoring is enabled on an interface of the Secondary Node that shows as ENABLED, DOWN
• C. Independent network configuration (INC) mode is enabled
• D. HA heartbeats are only seen on some enabled interfaces of the Secondary Node

Answer: D

NEW QUESTION 2
Which NetScaler Access Control List (ACL) command can a Citrix Administrator use to bridge traffic originating from 192.168.10.200?

• A. add ns acl
• B. add ns simpleacl
• C. add ns acl6
• D. add ns simpleacl6

Answer: D

NEW QUESTION 3
How does the NetScaler communicate that IP-to-MAC address bindings have changed to the switches and routers on the network, when a NetScaler high availability (HA) pair failover occurs?

• A. The NetScaler uses Reverse ARP (RARP) to update the devices on the network
• B. The NetScaler uses Proxy ARP to update the devices on the network
• C. The NetScaler uses Gratuitous ARPs (GARPs) to update the devices on the network
• D. The NetScaler uses MAC-based Forwarding to update the routers

Answer: C

NEW QUESTION 4
Which two deployment methods does remote desktop protocol (RDP) proxy support? (Choose two.)

• A. ICA proxy
• B. Two hops
• C. Optimal Gateway
• D. CVPN

Answer: AD

NEW QUESTION 5
Scenario: A Citrix Administrator is looking into adopting NetScaler to handle application delivery for an environment.
The administrator would like to start with these services:
IIS and Apache Web Servers
Microsoft SQL AlwaysON Database Availability Groups
Which two NetScaler features can the administrator use to achieve this goal? (Choose two.)

• A. Load Balancing
• B. Content Switching
• C. Data Stream
• D. Cloud Bridge Integration

Answer: BD

NEW QUESTION 6
Scenario: A NetScaler is configured with the following modes:
-MAC-based Forwarding
-USIP
-USNIP
-Layer 3 mode
A Citrix Administrator configured a new router and now requires some of the incoming and outgoing traffic to take different paths through the new router. However, the administrator notices that this is failing and takes a network trace. After a short monitoring period, the administrator notices that the packets are still NOT getting to the new router from the NetScaler.
Which mode should the administrator disable on the NetScaler to facilitate the addition of the new router and successfully route the packets?

• A. MAC-based Forwarding
• B. USIP
• C. Layer 3 mode
• D. USNIP

Answer: D

NEW QUESTION 7
What does a Citrix Administrator need to do on NetScaler Gateway to ensure that users accept the terms and conditions before they can log on using NetScaler Gateway?

• A. Configure a Responder policy.
• B. Upload an HTML file to the NetScaler appliance.
• C. Create an end user license agreement (EULA).
• D. Configure a Rewrite policy.

Answer: C

NEW QUESTION 8
Scenario: A Citrix Administrator created a rewrite policy to add a custom footer for a NetScaler Gateway login page. However, the administrator is NOT able to see the changes on the login page.
Which step can the administrator perform next to see the changes on the login page?

• A. Restart the NetScaler
• B. Edit the vpn/gateway_login_view.js file
• C. Make changes to rc.netscaler
• D. Disable the Rewrite and Responder feature

Answer: B

NEW QUESTION 9
Scenario: A Citrix Administrator is concerned about the amount of health checks the NetScaler is sending the back-end resources. The administrator would like to find a way to remove health checks from specific bound services.
How can the administrator accomplish this?

• A. Use reverse condition monitoring.
• B. Use Service Groups to minimize health checks.
• C. Unbind the current monitor.
• D. Use the No-Monitor Option.

Answer: C

NEW QUESTION 10
Scenario: A Citrix Administrator entered the command-line interface commands below to prevent IP address 10.10.100 from accessing the NetScaler on port 80.
add simpleacl rule1 DENY- srcIP 10.10.10.100 –TTL 600 add simpleacl rule2 DENY- srcIP 10.10.10.100 –destPort 80 add ns acl rule1 DENY- srcIP 10.10.10.100-priority 10
add ns acl rule2 DENY- srcIP 10.10.10.100-priority 100 apply ns acls
Which Access Control List (ACL) will the NetScaler use to deny the IP address?

• A. add ns acl rule1 DENY-srcIP 10.10.10.100-priority 10
• B. add simpleacl rule1 DENY- srcIP 10.10.10.100 –TTL 600
• C. add simpleacl rule2 DENY- srcIP 10.10.10.100 –destPort 80
• D. add ns acl rule2 DENY- srcIP 10.10.10.100-priority 100

Answer: B

NEW QUESTION 11
Which setting can a Citrix Administrator use to reduce server load, improve response time and increase the number of SSL transactions per second on a SSL virtual server created with default settings?

• A. Session Reuse
• B. SSLv3
• C. Session Timeout
• D. SSLv2 Redirect

Answer: C

NEW QUESTION 12
Which type of policy can be applied to a NetScaler Gateway virtual server to limit access to XenDesktop resources, if the user device does NOT comply with the company’s security requirements?

• A. Responder
• B. Authorization
• C. Session
• D. Traffic

Answer: A

NEW QUESTION 13
Scenario: A Citrix Administrator needs to integrate LDAP for NetScaler system administration using the current Active Directory groups. The administrator created the group on the NetScaler, exactly matching the group name in LDAP.
What can the administrator add next to complete the configuration of the LDAP?

• A. Users to the group on the NetScaler
• B. An AAA action to the group
• C. A command policy to the group to specify the permission level
• D. A nested group to the new group

Answer: C

NEW QUESTION 14
Scenario: A Citrix Administrator manages an environment that has multiple websites running through a NetScaler MPX 5550. The NetScaler meets the needs of the environment throughout the year, except in December, when the capacity doubles. The administrator needs to handle this increased web traffic with a temporary, cost-effective solution.
Which action should the administrator recommend in order to handle the increased web traffic?

• A. Purchase a BurstPack License
• B. Purchase NetScaler Gateway Platform License
• C. Purchase a license to upgrade the MPX 5550 to a MPX 5650
• D. Purchase Universal License

Answer: A

NEW QUESTION 15
How can a Citrix Administrator provide two-factor authentication with tokens in a XenDesktop with NetScaler Gateway environment?

• A. Create a SAML IDP policy and bind it to the existing virtual server.
• B. Configure a TACACS authentication policy and bind it to the existing virtual server.
• C. Configure a RADIUS authentication policy and bind it to the existing virtual server.
• D. Create an authorization policy and bind it to the existing virtual server.

Answer: C

NEW QUESTION 16
Which NetScaler feature can be utilized to reuse existing TCP connections?

• A. Content Switching
• B. TCP Buffering
• C. Keep Alives
• D. Connection Multiplexing

Answer: D

NEW QUESTION 17
A Citrix Administrator needs to customize the user experience for users connecting with the NetScaler Gateway plug-in.
Which three options can the administrator configure in this customization, using session and traffic policies? (Choose three.)

• A. The level of user access to the applications
• B. Single sign-on
• C. Split tunneling
• D. The domains to which users are allowed access
• E. Authentication methods

Answer: CDE