Citrix 1Y0-402 Braindumps 2021

NEW QUESTION 1
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment The architect has identified the requirements, based on the assessment and early stages of the design
Click the Exhibit button to view the requirements.

Additionally, the IT team has identified the following general requirements:
The provisioning strategy should be compatible with the planned design decisions.
The provisioning strategy should minimize the steps required to perform image and application updates. Which three follow-up questions should the architect ask about this environment, based on the planned design decisions? (Choose three.)

• A. How much storage is available for the Virtual Delivery Agent (VDA) machines?
• B. What is the VM uplink speed in the current deployment?
• C. Is PXE currently being used in the subnets where the Virtual Delivery Agent (VDA) machines will be placed?
• D. Will the machines using the images be physical or virtual?
• E. Are there any applications which must only be accessed by a subset of users?

Answer: ABC

NEW QUESTION 2
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. Currently, the environment is configured with two locations with identical XenDesktop Sites. Each Site has two Delivery Controllers, two StoreFront servers, and one NetScaler high availability pair. The same applications have been
published from both Sites for all the users. Two Zones (Zone A and Zone B) are configured in each Site with one Controller in each zone. The Microsoft Exchange server is only accessible from Virtual Delivery Agent (VDA) machines in Zone A in each Site.
The following access requirements have been identified:
Users should have a single URL when accessing resources from different Sites.
Users should always connect to the datacenter closest to their location.
Applications added to Favorites within Citrix Receiver should be retained when accessed from different Sites.
Launched applications and desktops should always connect through a local NetScaler.
No duplication of applications published from different Sites.
Microsoft Outlook should always launch in Zone A.
The architect should recommend configuring Optimal Gateway routing on _____ across both locations to ensure that users connect through a local NetScaler. (Choose the correct option to complete the sentence.)

• A. Delivery Controllers
• B. StoreFront servers
• C. Global Server Load Balancing (GSLB) vServers
• D. NetScaler appliances

Answer: B

NEW QUESTION 3
Scenario: The IT team of a company needs to migrate to Microsoft Azure and has asked a Citrix Architect for a solution that offers protection from datacenter level failures.
What should the architect recommend the IT team create in Microsoft Azure?

• A. Availability set with update domain
• B. Availability set with fault domain
• C. Resource group
• D. Availability zones

Answer: D

Explanation: Reference https://docs.microsoft.com/en-us/azure/virtual-machines/windows/manage-availability

NEW QUESTION 4
Scenario: While assessing the User Layer, a Citrix Architect finds that most of the internal users connect using corporate-owned laptops, desktop devices, and thin clients. Many of these laptops and desktop devices are running Windows 10, while the remainder of the machines are running Windows 7 and are in the process of being migrated to Windows 10. Some users also connect using personal devices.
Currently, Citrix Receiver is manually installed on any endpoint device added to the company. All these devices use Citrix Receiver version 4.8 and above. The IT team is planning to automate a process to update all the devices with the latest version of Citrix Receiver and to automate another process for automatic installation of Citrix Receiver without incurring extra costs and maintenance.
What should the architect recommend to upgrade Citrix Receivers for internal Windows endpoints?

• A. The use of deployment tools for internal endpoints.
• B. The deployment of Enterprise software.
• C. Configure Receiver auto-updates through Citrix Cloud.
• D. Edit the Web.config file and set upgradeAtLogin to True.

Answer: A

NEW QUESTION 5
Improve the user experience

Answer:

NEW QUESTION 6
Scenario: A Citrix Architect needs to redesign an existing XenApp and XenDesktop environment to use Machine Creation Services (MCS). During the design discussions, the locations for the MCS-provisioned thin clone machine disks are proposed as shown in the Exhibit.
Click the Exhibit button to view the details.


Which two potential drawbacks should the architect address with the customer before proceeding with this configuration? (Choose two.)

• A. It is limited to NFS shared storage.
• B. It will require substantial read IOPS from the shared storage location during machine creation and updates.
• C. It will require substantial write IOPS to the shared storage location as temporary data is written.
• D. It will require more storage to be allocated on the VM hosts compared with other options.
• E. It is limited to certain hypervisors.

Answer: CE

NEW QUESTION 7
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment for a bank. After the project kickoff meeting, the following business drivers have been identified and prioritized in the following order:
1. Increase security

Answer:

NEW QUESTION 8
Scenario: A Citrix Architect needs to design a multi-datacenter XenApp and XenDesktop environment that will use Provisioning Services (PVS) to manage Virtual Delivery Agent (VDA) machine images. Each datacenter will have a separate Provisioning Services farm. During the design discussions, the architect creates a diagram to depict the way vDisk files will be replicated between PVS farms, based on the available storage for the vDisk Stores.
Click the Exhibit button to view the diagram.

Overall, the customer has identified the following objectives for the image replication process:
Minimize the administrative time required to replicate images between farms
Must be usable by PVS farm administrators based on native tools
Minimize network traffic between datacenters
Which method should the architect use to replicate the vDisk files between datacenters?

• A. SAN replication
• B. Scheduled robocopy commands
• C. Microsoft DFS-R
• D. vDisk Replicator Tool
• E. Manual copy

Answer: D

NEW QUESTION 9
Scenario: A Citrix Architect has designed an active/passive XenApp and XenDesktop environment for a customer, where the passive datacenter serves as the disaster recovery (DR) datacenter for all users.
The following has been configured:
NetScaler Gateways in both datacenters, each with a unique URL
NetScaler load balancing of StoreFront and Delivery Controller XML services
A separate XenApp and XenDesktop Site at each datacenter
Two StoreFront servers deployed in each datacenter aggregating resources from the Delivery Controllers in the respective datacenter
During a disaster recovery strategy review, the IT infrastructure director recommends exploring cloud-based disaster recovery options for the XenApp and XenDesktop environment. The director reminds the team that the new solution would also have to support the following objectives:
The DR environment needs to be fully functional in the event that the primary datacenter goes completely offline.
The DR environment should require minimal operating costs until it is needed to host active user sessions.
In a DR event, active user sessions should connect directly to the resource location without going through additional hops.
The architect develops four different conceptual diagrams to display the current architecture as well as the potential cloud-based DR locations.
Click the Exhibit button to view the conceptual diagrams.


Based on the diagrams and above requirements, which Site architecture should the architect use?

• A. Option 4
• B. Option 2
• C. Option 3
• D. Option 1

Answer: D

NEW QUESTION 10
Scenario: A Citrix Architect has designed an active/passive XenApp and XenDesktop environment for a customer, where the passive datacenter serves as the disaster recovery datacenter for all users.
The following has been configured:
NetScaler Global Server Load Balancing (GSLB) to provide single URL direction to the active datacenter.
GSLB has health monitors configured for the load balanced servers.
NetScaler Gateways are on both datacenters.
NetScaler load balancing occurs for StoreFront and Delivery Controller XML services.
A single XenApp and XenDesktop Site exists.
Four Delivery Controllers are members of the Site.
Two Delivery Controllers are members of the primary zone in the active datacenter.
Two Delivery Controllers are members of the satellite zone in the passive datacenter.
SQL is deployed in the active datacenter.
Local Host Cache is enabled.
Two StoreFront servers are deployed in each datacenter aggregating resources from the Delivery Controllers in the respective datacenter.
Virtual Delivery Agent (VDA) machines are deployed in both datacenters and configured to register with Delivery Controllers in their zone.
What would happen if the SQL Server in the primary datacenter were turned off?

• A. VDA machines from the primary datacenter would register with the Delivery Controllers in the passive datacenter.
• B. GSLB will NOT identify that the SQL Server is down and sessions cannot launch.
• C. StoreFront in the primary datacenter would still be able to launch sessions.
• D. GSLB will start redirecting connections to the secondary datacenter.

Answer: A

NEW QUESTION 11
Scenario: A Citrix Architect needs to design a single-Site XenApp and XenDesktop environment. Through earlier design discussions, the architect has determined the environment details listed in the Exhibit.
Click the Exhibit button to view the details.

Which SQL server baseline specifications will provide acceptable performance and stability while avoiding unnecessary over-provisioning of resources?

• A. 4 CPU cores, 8 GB of RAM, 10 GB database storage
• B. 2 CPU cores, 4 GB of RAM, 10 GB database storage
• C. 2 CPU cores, 4 GB of RAM, 100 GB database storage
• D. 8 CPU cores, 16 GB of RAM, 10 GB database storage
• E. 8 CPU cores, 16 GB of RAM, 100 GB database storage
• F. 4 CPU cores, 8 GB of RAM, 100 GB database storage

Answer: F

NEW QUESTION 12
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The architect has identified the access requirements listed in the Exhibit. Click the Exhibit button to view the requirements.

A single store has already been configured with the following settings, every other setting has been kept as a default.
Username/Password authentication
No resource filtering
NetScaler Gateway is configured for authentication
No IIS redirection
Deploy Receiver 4.10 installer
The architect needs to evaluate whether the current store, which cannot be changed, meets the requirements of the user groups and needs to determine how many additional stores are required.
How many additional StoreFront stores does the architect need to support the requirements shown in the Exhibit?

• A. 1
• B. 4
• C. 3
• D. 5
• E. 2

Answer: E

NEW QUESTION 13
Scenario: A Citrix Architect is designing a XenApp and XenDesktop environment and needs to design machine catalogs and Delivery Groups. Users should only be able to access their assigned resources.
Click on the Exhibit button to view the design requirements.

What is the appropriate design using the minimum number of machine catalogs and Delivery Groups, based on the requirements in the Exhibit?

• A. 1 machine catalog, 2 Delivery Groups, and no tagging
• B. 2 machine catalogs, 3 Delivery Groups, and tagging for the machine hosting the Engineering application- QA version
• C. 3 machine catalogs, 4 Delivery Groups, and no tagging
• D. 1 machine catalog, 1 Delivery Group, and tagging for the machine hosting the Engineering application - QA version

Answer: A

NEW QUESTION 14
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The architect has identified printing requirements for certain user groups and locations, as shown in the Exhibit.
Click the Exhibit button to view the requirements.

Currently, no printer settings or policies have been configured, and as such, the environment is using default settings. Universal Print Server will NOT be used in this design.
Which two settings should the architect configure to allow the Executives group to achieve the desired print
behavior and to ensure their print jobs are optimally routed? (Choose two.)

• A. Set Auto-create Client Printers policy to auto-create local printers only
• B. Enable Auto-create PDF Universal Printer policy
• C. Set Direct connections to print servers policy to Enabled
• D. Set Direct connections to print servers policy to Disabled
• E. Configure Session Printers policy
• F. Configure Default Printers policy
• G. Set Auto-create Client Printers policy to auto-create all client printers

Answer: CE

NEW QUESTION 15
Scenario: A Citrix Architect needs to implement a new XenDesktop environment for an engineering company. The IT department has purchased 1,000 XenDesktop Enterprise licenses. They will deploy Microsoft Office productivity applications to all users. Users access XenApp sessions from company offices using thin client devices and remotely through NetScaler Gateway using personal devices.
The company requires IT to produce a report of all XenApp connection failures for the previous year. Which two actions does the architect need to take to support these requirements? (Choose two.)

• A. Purchase XenDesktop Platinum licenses.
• B. Purchase NetScaler Gateway Universal licenses.
• C. Configure GroomSessionsRetentionDays to 365 days.
• D. Implement NetScaler Management and Analytics System (MAS).
• E. Configure GroomFailuresRetentionDays to 365 days.

Answer: AD

NEW QUESTION 16
Scenario: A Citrix Architect is designing hardware requirements for a small production XenApp and XenDesktop environment.
Requirements:
Access to the environment hosted in a single datacenter
Ability to perform maintenance on the environment without requiring an outage
Which hardware requirement does the architect need to include for hypervisor hosts in order to meet the customer's needs?

• A. Multiple individual hypervisor hosts in the same datacenter
• B. Separate hypervisor cluster/pool in an alternate datacenter
• C. Separate hypervisor clusters/pools in the same datacenter
• D. N+1 hypervisor hosts in a single cluster/pool

Answer: C