Cause all that matters here is passing the Cisco 300 075 dump exam. Cause all that you need is a high score of 300 075 pdf Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam. The only one thing you need to do is downloading Pass4sure 300 075 pdf exam study guides now. We will not let you down with our money-back guarantee.
Q31. Refer to the following exhibit.
Which Cisco IOS SAF Forwarder configuration is correct?
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
Answer: A
Explanation:
Incorrect Answer: B, C, D Summary steps to configure IOS SAF forwarder is given below
1. enable
2. configure terminal
3. router eigrp virtual-instance-name
4. service-family {ipv4 | ipv6} [vrf vrf-name] autonomous-system autonomous-system-number
5. topology base
6. external-client client_label
7. exit-sf-topology
8. exit-service-family
9. exit
10. service-family external-client listen {ipv4 | ipv6} tcp_port_number
11. external-client client-label
12. username user-name
13. password password-name
14.
Q32. Which option is a benefit of implementing CFUR?
A. CFUR is designed to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
Q33. Which three commands are mandatory to implement SRST for five Cisco IP Phones? (Choose three.)
A. call-manager-fallback
B. max-ephones
C. keepalive
D. limit-dn
E. ip source-address
Answer: A,B,E
Q34. Which three tests can you perform to verify redundancy in the customer environment? (Choose three.)
A. Verify that all phones are registered to a second subscriber server.
B. Verify that media resources fail over to a secondary subscriber server when the publisher fails.
C. Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection is disconnected.
D. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers.
E. Verify that the H.323 redundant connection is active.
F. Verify that SCCP fallback is configured in Cisco Unified Communications Manager.
Answer: A,B,C
Q35. Which symbol is required for globalized call routing?
A. +
B. *
C. %
D. /
E. ;
Answer: A
Q36. Refer to the exhibit.
All HQ phones are configured to use HQ_MRGL and all BR phones are configured to use BR_MRGL. For the HQ phones always to use the hardware conference bridge as a first choice, which configuration should be implemented?
A. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. Ensure that the instance ID for the hardware conference bridge is 0.
B. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. The hardware conference bridge must be configured first.
C. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first.
D. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Configure an additional HQ_MRGL_2. Add the HQ_MRG to HQ_MRGL. Add HQ_MRG_2 to HQ_MRGL_2. The HQ_MRGL should be assigned to the HQ phones. The HQ_MRGL_2 should be assigned to the HQ device pool.
Answer: C
Q37. In a distributed call processing network with locations-based CAC, calls are routed to and from intercluster trunks. Which trunk type is implemented in this network?
A. intercluster trunk with gatekeeper control
B. intercluster trunk without gatekeeper control
C. SIP trunk
D. h225 trunk
Answer: B
Q38. Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones?
A. Configure the branch office IP phones with CSS and partitions.
B. Configure the branch office IP phones with MRGs and MRGLs.
C. Configure the branch office IP phones with regions.
D. Configure the branch office IP phones with locations.
Answer: B
Q39. What impact do roaming-sensitive settings and Device Mobility settings have on call routing?
A. Device Mobility settings have no impact on call routing, but roaming-sensitive settings modify the AAR group, AAR CSS, and device CSS.
B. Device Mobility settings modify the device CSS and the roaming-sensitive settings modify the AAR group and AAR CSS.
C. Device Mobility settings modify the AAR group and the AAR CSS, the roaming-sensitive settings modify the device CSS.
D. Roaming-sensitive settings are settings that do not have an impact on call routing. Device Mobility settings, on the other hand, may have an impact on call routing because they modify the device CSS, AAR group, and AAR CSS.
Answer: D
Q40. How do RSVP-enabled locations differ from Cisco Unified Communications Manager locations?
A. RSVP is configured in the ISR independent of Cisco Unified Communications Manager.
B. RSVP enables AAR within Cisco Unified Communications Manager.
C. RSVP is topology aware.
D. RSVP is configured in Cisco Unified Communications Manager independent of the ISR.
Answer: C