Virtual Cisco 300-610 Exam Question Online

NEW QUESTION 1
Refer to the exhibit.

What must be the default gateway of the servers in EPG Web?

• A. subnet address of BD1
• B. subnet address of L3Out
• C. subnet address of BD2
• D. NAT appliance

Answer: D

NEW QUESTION 2
Which two configurations allow for routing traffic between two VDCs? (Choose two.)

• A. Connect the VDCs to an external Layer 3 device.
• B. Cross-connect the ports between the VDCs.
• C. Create VRF-aware software infrastructure interfaces.
• D. Create a policy map in the default VDC that routes traffic between the VDCs.
• E. Create interfaces in the VDC that can be accessed by another VDC.

Answer: AD

NEW QUESTION 3
What is a design consideration when implementing FSPF?

• A. Routes are based on the domain ID.
• B. Routes are based on the distance vector protocol.
• C. FSPF runs only on F Ports.
• D. FSPF runs on a per-chassis basis.

Answer: A

NEW QUESTION 4
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 5
Which two configuration methods can be used to deploy QoS to Cisco MDS Series switches? (Choose two.)

• A. zone-based QoS
• B. multiple QoS policies that match individual devices
• C. VSAN-based QoS
• D. FCoE VLAN-based QoS
• E. multiple QoS policies that match multiple devices

Answer: AC

NEW QUESTION 6
What is an advantage of using OTV as compared to VPLS for data center redundancy?

• A. prevents loops on point-to-point links
• B. provides head-end replication
• C. uses a proactive MAC advertisement
• D. provides full-mesh connectivity

Answer: A

NEW QUESTION 7
Which approach splits a pair of clustered fabric interconnects into two standalone devices?

• A. Run the disable fips-mode command on each fabric interconnect.
• B. Run the connect local-management command on each fabric interconnect.
• C. Erase the configuration of both fabric interconnects.
• D. Unplug the Layer 1 and Layer 2 interfaces between the devices.

Answer: D

NEW QUESTION 8
Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus 7700 Series Switches?

• A. NX-API
• B. Postman
• C. Bash shell
• D. Guest shell

Answer: A

NEW QUESTION 9
Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)

• A. number of vHBAs
• B. ARP entries
• C. UUID assignment
• D. VXLAN membership
• E. target server

Answer: AC

NEW QUESTION 10
Which element is the main functional component of the architecture that separates the internal fabric and the external network that connects sites when VXLAN EVPN is deployed multisite?

• A. border leaf
• B. service leaf
• C. border gateway
• D. service gateway

Answer: C

NEW QUESTION 11
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?

• A. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
• B. A separate DSCP value must be configured for all FCIP VSAN traffic.
• C. A separate DSCP value and priority queuing must be configured for all FCIP traffic.
• D. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.

Answer: D

NEW QUESTION 12
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)

• A. Layer 3 interfaces can belong to multiple VRFs.
• B. VRF-Lite interfaces can be Layer 2.
• C. Overlapping IP addresses are permitted on different VRFs.
• D. Interfaces that belong to VRFs can be physical or logical.
• E. VRF-Lite interfaces support MPLS.

Answer: CD

NEW QUESTION 13
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?

• A. BGP ECMP
• B. Layer 4 to Layer 7 device package
• C. inline load-balancing device
• D. ITD

Answer: B

NEW QUESTION 14
Drag and drop the configurations from the left onto the correct policies on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 15
Where does Cisco UCS handle Fibre Channel traffic failover?

• A. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode
• B. on the host, by using multipathing software
• C. in the hardware on the Cisco UCS VIC 12xx adapter or later
• D. in the hardware on any Cisco UCS VIC adapter

Answer: B

NEW QUESTION 16
Which two methods mitigate congestion in a SAN network? (Choose two.)

• A. Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.
• B. Use the port-monitor command to detect slow drain devices.
• C. Configure the port channel to enable individual buffer-to-buffer credits.
• D. Configure the port monitor to allow categorization of a specific device as slow.
• E. Configure the flow control for the FC to use R_RDY.

Answer: BD

NEW QUESTION 17
Which orchestration tool should be used for the management and analytics of servers across multiple sites?

• A. Cisco Intersight
• B. Cisco Nexus Fabric Manager
• C. Cisco UCS Manager
• D. Cisco Data Center Network Manager

Answer: A

NEW QUESTION 18
Which address pool is used when a vHBA template is created?

• A. MAC
• B. WWPN
• C. IP
• D. UUID

Answer: B

NEW QUESTION 19
Drag the appropriate from the left onto the current UDLD modes of operation on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 20
Which technology enables Layer 2 extension between remote data center sites?

• A. FCIP
• B. GRE
• C. DMVPN
• D. OTV

Answer: D

NEW QUESTION 21
......