Your success in Cisco 300-815 is our sole target and we develop all our 300-815 braindumps in a way that facilitates the attainment of this target. Not only is our 300-815 study material the best you can find, it is also the most detailed and the most updated. 300-815 Practice Exams for Cisco Cisco Other Exam 300-815 are written to the highest standards of technical accuracy.
Free demo questions for Cisco 300-815 Exam Dumps Below:
NEW QUESTION 1
What is the relationship between partition, time schedule, and time period in Time-of-Day routing in Cisco Unified Communications Manager?
- A. A partition can have multiple time schedules assigne
- B. A time schedule contains one or more time periods.
- C. A partition can have one time schedule assigne
- D. A time schedule contains one or more time periods.
- E. A partition can have multiple time schedules assigne
- F. A time schedule contains only one time period.
- G. A partition can have one time schedule assigne
- H. A time schedule contains only one time period.
Answer: A
NEW QUESTION 2
Refer to the exhibit. How many maximum hops can an ILS updarte traverse?
- A. 3
- B. 6
- C. 9
- D. 12
Answer: A
NEW QUESTION 3
An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port 5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration? (Choose two.)
- A. Incoming Port in SIP Information section of the SIP Trunk configuration.
- B. Incoming Port in Security Information of the SIP Profile configuration.
- C. Destination Port in SIP Information section of the SIP Trunk configuration
- D. Incoming Port in SIP Trunk Security Profile configuration
- E. Destination Port in SIP Trunk Security Profile configuration
Answer: CD
NEW QUESTION 4
Which section under the Real-Time Monitoring Tool allows for reviewing the call flow and signaling for a SIP call in real time?
- A. Analysis Manager > Inventory > Trace File Repositories
- B. System > Tools > Trace and Log Central
- C. Voice/Video > Session Trace Log View > Real Time Data
- D. Voice/Video > Session Trace Log View > Open From Local Disk
Answer: C
NEW QUESTION 5
Which action is correct with respect to toll fraud prevention configuration in the Cisco Unified Communications Manager Express?
- A. Configure Direct Inward Dial for Incoming ISDN Calls with overlap dialing.
- B. Configure IP Address Trusted Authentication for Incoming VoIP Calls.
- C. Configure the command no ip address trusted authenticate under “voice service voip”.
- D. Enable Secondary Dial tone on Analog and Digital FXO Ports.
Answer: B
NEW QUESTION 6
Why would RTP traffic that is sent from the originating endpoint fail to be received on the far endpoint?
- A. The far end connection data (c=) in the SDP was overwritten by deep packet inspection in the call signaling path.
- B. Cisco Unified Communications Manager invoked media termination point resources.
- C. The RTP traffic is arriving beyond the jitter buffer on the receiving end.
- D. A firewall in the media path is blocking TCP ports 16384-32768.
Answer: D
NEW QUESTION 7
If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern “123”?
- A. 12!
- B. 12X (urgent priority set)
- C. 1XX (urgent Priority Set)
- D. 12[2-5]
Answer: B
NEW QUESTION 8
When configuring hunt groups, where do you add the individual directory numbers that will be part of the group?
- A. route group
- B. line group
- C. hunt list
- D. hunt pilot
Answer: B
NEW QUESTION 9
You see the voice register pool 1 command in your Cisco Unified Communications Manager Express configuration. Which configuration is occurring in this section?
- A. configuration for a single SIP phone
- B. configuration items common for all SIP phones
- C. configuration for a pool of SIP phones (similar to device pool on Cisco Unified Communications Manager)
- D. configuration for SIP registrar service
Answer: C
NEW QUESTION 10
Refer to the exhibit. Within the North American Numbering Plan, gateways located in Ottawa, Canada and marked as “YOW” are assigned to the Calling Party Transformation CSS NANP_CgPTP, which contains partition NANP_calling_xforms. What is the calling-party number and the numbering type if the calling user +1613-555-1234 dials the number?
- A. calling number 613-555-1234 and numbering type “subscriber”
- B. calling number 011-1-613-555-1234 and numbering type “subscriber”
- C. calling number 011613-555-1234 and numbering type “international”
- D. calling number 613-555-1234 and numbering type “national”
Answer: D
NEW QUESTION 11
A support engineer is troubleshooting a voice network. When conducting a search for call setup details related to calling search space issues, which trace files should be investigated?
- A. CallManager traces
- B. CTI Manager traces
- C. Cisco IP Manager Assistant
- D. Call logs
Answer: A
NEW QUESTION 12
A user reports that when they attempt to log out from the Cisco Extension Mobility service by pressing the Services button, they cannot log out. What is the most likely cause of this issue?
- A. The Cisco Extension Mobility service has not been configured on the phone.
- B. There might be a significant delay between the button being pressed and the Cisco Extension Mobility service recognizing i
- C. It would be best to check network latency.
- D. The user device profile has not been assigned to the user.
- E. The user device profile is not subscribed to the Cisco Extension Mobility service.
Answer: D
NEW QUESTION 13
Configure Call Queuing in Cisco Unified Communications Manager. Where do you set the maximum number of callers in the queue?
- A. in the telephony service configuration
- B. in the queuing configuration
- C. in Cisco Unified CM Enterprise Parameters
- D. in Cisco Unified CM Service Parameters
Answer: B
NEW QUESTION 14
An engineer is configuring a call park feature in Cisco Unified Communications Manager Express. Which command does the engineer use to ensure that the call is reverted to the user after 60 seconds?
- A. R2(config-ephone-dn)#park reservation-group 60
- B. R2(config-ephone-dn)#park-slot timeout 60 limit 2 recall alternate 3002
- C. R2(config-ephone-dn)#park reservation-group 1
- D. R2(config-ephone-dn)#park-slot timeout 30 limit 2 recall alternate 3002
Answer: B
NEW QUESTION 15
A user in location X dials an extension at location Y. The call travels through a QoS-enabled WAN network, but the user experiences choppy or clipped audio. What is the cause of this issue?
- A. missing Call Admission Control
- B. codec mismatch
- C. ptime mismatch
- D. phone class of service issue
Answer: B
NEW QUESTION 16
Which services are needed to successfully implement Cisco Extension Mobility in a standalone Cisco Unified Communications Manager server?
- A. Cisco Extended Functions, Cisco Extension Mobility, and Cisco AXL Web Service
- B. Cisco CallManager, Cisco TFTP, and Cisco CallManager SNMP Service
- C. Cisco CallManager, Cisco TFTP, and Cisco Extension Mobility
- D. Cisco TAPS Service, Cisco TFTP, and Cisco Extension Mobility
Answer: C
NEW QUESTION 17
Which configuration must an administrator perform to display Translation Pattern operations in Cisco Unified Communications Manager SDL traces?
- A. Enable the Detailed Call Analysis option under Enterprise Parameters for Unified CM.
- B. Set up the Digit Analysis Complexity in Service Parameters for Cisco Unified CM to TranslationAndAlternatePatternAnalysis.
- C. Check the Translation Patterns Analysis check box in Micro Traces on the Cisco Unified CM Serviceability page.
- D. By default, the Translation Patterns operations are printed in SDL traces, so no additional configuration is necessary.
Answer: A
NEW QUESTION 18
Refer to the exhibit. An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?
- A. address 555 ……..
- B. codec g729
- C. session-protocol sipv2
- D. incoming called number 555…….
Answer: D
NEW QUESTION 19
Where is the dtmf-relay command configured on Cisco Unified Border Element?
- A. in the voice-class VoIP configuration
- B. in the VoIP dial peer
- C. in global SIP configuration
- D. in the VoIP or POTS dial peers
Answer: B
NEW QUESTION 20
When locations-based Call Admission Control denies the call, which two masks can AAR apply when routing the call through the PSTN? (Choose two.)
- A. AAR destination mask
- B. called party transform mask
- C. external phone number mask
- D. +E.164 alternate number mask
- E. enterrise alternate number mask
Answer: AC
NEW QUESTION 21
Which two descriptions of the Standard Local Route Group deployment are true? (Choose two.)
- A. can be associated under the route group
- B. can be associated only under the route list
- C. chooses the route group that is configured under the device pool of the calling-party device
- D. chooses the route group that is configured under the device pool of the called-party device
- E. can be assigned directly to the route pattern
Answer: BD
NEW QUESTION 22
......
Recommend!! Get the Full 300-815 dumps in VCE and PDF From Certleader, Welcome to Download: https://www.certleader.com/300-815-dumps.html (New 0 Q&As Version)