Certleader 3V0-42.20 Questions are updated and all 3V0-42.20 answers are verified by experts. Once you have completely prepared with our 3V0-42.20 exam prep kits you will be ready for the real 3V0-42.20 exam without a problem. We have Up to the immediate present VMware 3V0-42.20 dumps study guide. PASSED 3V0-42.20 First attempt! Here What I Did.

Free 3V0-42.20 Demo Online For VMware Certifitcation:

NEW QUESTION 1
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the assessment:
3V0-42.20 dumps exhibit There must be a performance based SLA for East ?C West traffic.
Which two key performance features should the architect recommend? (Choose two.)

  • A. Configure N-VDS enhanced Data Path
  • B. Install advanced Edge pNIC Features
  • C. Setup RSS to leverage multiple cores
  • D. Leverage DPDK drivers
  • E. Enable GENEVE Offload

Answer: CE

NEW QUESTION 2
Refer to the exhibit.
3V0-42.20 dumps exhibit
A financial company is adopting micro-services with the intent of simplifying network security. An NSX-T architect is proposing a NSX-T Data Center micro-segmentation logical design. The architect has created a diagram to share with the customer.
How many security levels will be implemented according to this Logical Design? (Choose the best answer.)

  • A. 5 levels
  • B. 3 levels
  • C. 9 levels
  • D. 4 levels

Answer: A

NEW QUESTION 3
According to the Discover Task of the Engagement Lifecycle, which statement would be classified as a risk? (Choose the best answer.)

  • A. Enough power and cooling capacity is available in each rack in the data center.
  • B. To retain certification to provide financial services to end customers, PCI-DSS audits need to be passed.
  • C. A merger and acquisition process was recently completed and new company on-boarding is not completed.
  • D. Due to existing contracts and purchase agreements, the existing server hardware needs to be reused.

Answer: B

NEW QUESTION 4
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop about ESXi Host networking:
3V0-42.20 dumps exhibit A total of 50 ESXi hosts to be configured as Transport Nodes.
3V0-42.20 dumps exhibit All ESXi hosts have a dedicated 2 ?? Intel 10Gbps Physical Network adapter for the Overlay Traffic. To achieve low latency, high throughput, redundancy, and performance, which two NIC teaming policies
should the architect recommend? (Choose two.)

  • A. Load Balance Source MAC
  • B. Load Balance Port ID
  • C. Load Balance Source
  • D. Load Balance Source Port ID
  • E. Failover Order

Answer: DE

NEW QUESTION 5
Which two protocols are typically used for multicast in a NSX-T Data Center environment? (Choose two.)

  • A. PIM Full Form
  • B. PIM Dense Mode
  • C. IGMPv2
  • D. PIM Sparse mode
  • E. IGMPv3

Answer: CD

NEW QUESTION 6
A telecom company has purchased NSX-T as part of a Software Defined Data Center (SDDC) initiative. The company wants to ensure the highest performance for network traffic leaving the virtual environment.

  • A. Configure Equal-Cost Multi-Pathing on the NSX Edges.
  • B. Configure SR-IOV for the virtual NSX Edges.
  • C. Use bare metal NSX Edges.
  • D. Select Network cards that support VXLAN Offload.
  • E. Set ??Latency Sensitive?? option to High when deploying the virtual NSX Edges.

Answer: BE

NEW QUESTION 7
Which two VMware recommendations should an architect follow when configuring top of rack (ToR) switches in an NSX-T Data Center environment? (Choose two.)

  • A. Use only IPv4 addressing in all deployments.
  • B. Configure redundant physical switches to enhance availability.
  • C. Configure switch ports that connect to ESXi host manually as trunk ports.
  • D. Configure switch ports with a Dynamic Trunking Protocol.
  • E. Modify the Spanning Tree Protocol to increase the time to transition to the forwarding state.

Answer: DE

NEW QUESTION 8
An NSX-T architect is working with a customer who wants to improve performance and future-proof their workloads with a multi-site architecture.
A current-state analysis captured this information:
3V0-42.20 dumps exhibit Latency between sites is 160ms.
3V0-42.20 dumps exhibit Bandwidth is 2Gbps.
3V0-42.20 dumps exhibit The MTU is 1600.
What two VMware design recommendations should the architect recommend to the organization to achieve future-proofing? (Choose two.)

  • A. MTU is recommended to be 9000.
  • B. MTU must be at least 1700.
  • C. Bandwidth must be at least 10Gbps.
  • D. Latency RTT is acceptable.
  • E. Latency must be less than 150ms.

Answer: AE

NEW QUESTION 9
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. Which two statements should the architect consider as non-technical requirements? (Choose two.)

  • A. Any solution should add more value to current and future customers engagements.
  • B. The design should offer agility and freedom for application phases.
  • C. All application servers have hardcoded IP addresses.
  • D. Current business continuity and disaster recovery plans are based on tape technology.
  • E. Different vendors are used for the storage solution.

Answer: BD

NEW QUESTION 10
A customer has a requirement to implement a next generation firewall (NGFW) to improve security network introspection. The customer wants to apply the NGFW to all workloads exposed both internally and externally. The customer wants the NGFW to work seamlessly with NSX-T Data Center and vSphere.
Which solution should be recommended to the customer? (Choose the best answer.)

  • A. Use network introspection only on the external workloads and use NSX DFW for internal workloads.
  • B. Apply the NGFW on bare metal hosts which will offer better performance of inline network introspection.
  • C. Apply the NGFW to internal and external workloads for increased protection and use NSX-T Data Center with Federation to set network policies.
  • D. Use NSX-T Data Center leveraged with NSX Intelligence to protect all workloads at the network inspection level.

Answer: D

NEW QUESTION 11
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop:
3V0-42.20 dumps exhibit Any proposed solution must provide low latency.
3V0-42.20 dumps exhibit Any proposed solution must provide high throughput.
3V0-42.20 dumps exhibit Customer is running stock trading applications.
Which two selections should the architect recommend to meet high-performance workload requirements?
(Choose two.)

  • A. Leverage ESXi as the compute host.
  • B. Use LACP for all uplink profiles.
  • C. Leverage KVM as the compute host.
  • D. Enable enhanced data path mode on the N-VDS.
  • E. Enable latency sensitivity mode on the N-VDS.

Answer: AD

NEW QUESTION 12
Refer to the exhibits.
Design Option1:
3V0-42.20 dumps exhibit
Design Option 2:
3V0-42.20 dumps exhibit
Design Option 3:
3V0-42.20 dumps exhibit
Design Option 4:
3V0-42.20 dumps exhibit
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. The conceptual design includes these requirements, assumptions, constraints, and risks:
3V0-42.20 dumps exhibit Critical applications must run across sites without changing IP address.
3V0-42.20 dumps exhibitRTO/RPO must be reduced for recovery of applications on secondary site.
3V0-42.20 dumps exhibit IT Teams require automation tools for configuration.
Which Conceptual Design would the architect recommend to the customer? (Choose the best answer.)

  • A. Design Option 4
  • B. Design Option 2
  • C. Design Option 1
  • D. Design Option 3

Answer: C

NEW QUESTION 13
An architect is designing a solution for containerization. The solution will include high availability and security using NSX-T Data Center. The architect plans to provide a basic required components list in the Logical Design.
Which solution should the architect recommend? (Choose the best answer.)

  • A. 3 NSX Managers, 3 virtual NSX Edges, two Tier-0 gateways in Active/Standby, BGP configuration
  • B. 2 NSX Managers, 2 virtual NSX Edges, one Tier-0 gateway, BGP configuration and a static route
  • C. 3 NSX Managers, 3 virtual NSX Edges, one Tier-0 gateway and a static route and OSPF
  • D. 1 NSX Manager, 2 virtual NSX Edges, two Tier-0 gateways in Active/Active, BGP configuration

Answer: A

NEW QUESTION 14
Which three assessment findings are part of a Conceptual Design? (Choose three.)

  • A. risks
  • B. host names
  • C. justifications
  • D. constraints
  • E. assumptions
  • F. vendor model

Answer: ACD

NEW QUESTION 15
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
3V0-42.20 dumps exhibit Existing hardware will be used in any design proposal.
3V0-42.20 dumps exhibit Network bandwidth cannot be expanded.
Which concept of the Discover Task do these items belong to? (Choose the best answer.)

  • A. constraint
  • B. requirement
  • C. risk
  • D. assumption

Answer: A

NEW QUESTION 16
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:
3V0-42.20 dumps exhibit Customer currently has a single 10 host vSphere cluster.
3V0-42.20 dumps exhibit Customer wants to improve network security and automation.
3V0-42.20 dumps exhibit Current cluster utilization and business policies prevent changing the existing vSphere deployment.
3V0-42.20 dumps exhibit High-availability is important to the customer.
Which three selections should the architect include in their design? (Choose three.)

  • A. Apply vSphere DRS VM-Host anti-affinity rules to the virtual machines of the NSX-T Edge cluster.
  • B. Deploy at least two NSX-T Edge virtual machines in the vSphere cluster.
  • C. Deploy the NSX Controllers in the management cluster.
  • D. Apply vSphere Distributed Resource Scheduler (vSphere DRS) VM-Host anti-affinity rules to NSX Managers.
  • E. Remove 2 hosts from the cluster and create a new edge cluster.
  • F. Remove vSphere DRS VM-Host affinity rules to the NSX-T Controller VMs.

Answer: ACE

NEW QUESTION 17
A Solutions Architect is working with a customer which wants to extend their traditional Telco IP/MPLS core network to an NFV cloud.
Which NSX-T Data Center feature can be recommended by the architect? (Choose the best answer.)

  • A. Distributed IDS
  • B. EVPN
  • C. Load Balancer
  • D. BGP

Answer: D

NEW QUESTION 18
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop:
3V0-42.20 dumps exhibit Current hypervisor of choice is KVM.
3V0-42.20 dumps exhibit Cost reduction is important.
Which two selections should the architect recommend to the organization? (Choose two.)

  • A. Deploy Edge VM Nodes using ISO.
  • B. Deploy NSX Manager using OVF.
  • C. Deploy NSX Manager using QCOW2.
  • D. Deploy bare metal Edge Nodes.
  • E. Deploy Edge VM Nodes on KVM.

Answer: CD

NEW QUESTION 19
A customer wants to place their NSX Managers in different subnets.
Which would an architect recommend to support the request? (Choose the best answer.)

  • A. Use a load balancer.
  • B. Use round-robin DNS.
  • C. Use NAT.
  • D. Use a cluster Virtual IP.

Answer: D

NEW QUESTION 20
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. Which risk is documented by an architect? (Choose the best answer.)

  • A. The security team has a firewall communication matrix documented.
  • B. The team is not trained for NSX-T but have a very strong experience with vSphere.
  • C. Open communication between different application tiers is not allowed.
  • D. Aggregate N-S throughput at any given time should be at least 10G.

Answer: B

NEW QUESTION 21
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
3V0-42.20 dumps exhibit There are applications which use IPv6 addressing.
3V0-42.20 dumps exhibit Network administrators are not familiar with NSX-T Data Center solutions.
3V0-42.20 dumps exhibit Hosts can only be configured with two physical NICs.
3V0-42.20 dumps exhibit There is an existing management cluster to deploy the NSX-T components.
3V0-42.20 dumps exhibit Dynamic routing should be configured between the physical and virtual network.
3V0-42.20 dumps exhibit There is a storage array available to deploy NSX-T components.
Which risk was documented by the architect? (Choose the best answer.)

  • A. Network administrators are not familiar with NSX-T Data Center solutions.
  • B. Dynamic routing should be configured between the physical and virtual network.
  • C. There are applications which use IPv6 addressing.
  • D. There is a storage array available to deploy NSX-T components.

Answer: B

NEW QUESTION 22
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Enagagement Lifecycle:
3V0-42.20 dumps exhibit There are applications which use IPv6 addressing.
3V0-42.20 dumps exhibit Network administrators are not familiar with NSX-T Data Center solutions.
3V0-42.20 dumps exhibit Hosts can only be configured with two physical NICs.
3V0-42.20 dumps exhibit There is an existing management cluster to deploy the NSX-T components.
3V0-42.20 dumps exhibit Dynamic routing should be configured between the physical and virtual network.
3V0-42.20 dumps exhibit There is a storage array available to deploy NSX-T components.
Which constraint was documented by the architect? (Choose the best answer.)

  • A. Dynamic routing should be configured between the physical and virtual network.
  • B. There are applications which use IPv6 addressing.
  • C. Hosts can only be configured with two physical NICs.
  • D. There are enough CPU and memory resources in the existing management cluster.

Answer: A

NEW QUESTION 23
An architect is helping an organization with the Logical Design of a Layer 2 bridging solution. This information was gathered during the Assessment Phase:
3V0-42.20 dumps exhibit Workloads are running on ESXi hosts.
3V0-42.20 dumps exhibit Workloads are running on KVM hosts.
3V0-42.20 dumps exhibit Workloads on hypervisors should use bridging services.
3V0-42.20 dumps exhibit VLAN 50 is used for Tier-0 uplink connectivity.
Which selection should the architect include in their design? (Choose the best answer.)

  • A. Create an NSX Edge Bridge Cluster and configure the bridging profile with VLAN 60.
  • B. Create an NSX Edge Bridge Cluster and configure the bridging profile with VLAN 50.
  • C. Create an ESXi Bridge Cluster and configure the bridging profile with VLAN 50.
  • D. Create an ESXi Bridge Cluster and configure the bridging profile with VLAN 60.

Answer: B

NEW QUESTION 24
......

Recommend!! Get the Full 3V0-42.20 dumps in VCE and PDF From Dumps-hub.com, Welcome to Download: https://www.dumps-hub.com/3V0-42.20-dumps.html (New 57 Q&As Version)