Our pass rate is high to 98.9% and the similarity percentage between our ccie 400 101 dumps study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 400 101 vce exam in just one try? I am currently studying for the Cisco passleader 400 101 exam. Latest Cisco passleader 400 101 Test exam practice questions and answers, Try Cisco 400 101 ccie Brain Dumps First.
P.S. Realistic 400-101 item pool are available on Google Drive, GET MORE: https://drive.google.com/open?id=196EquYfuI9pjbvqGlSZ_sgL0MRdotS6N
New Cisco 400-101 Exam Dumps Collection (Question 8 - Question 17)
New Questions 8
Refer to the exhibit.
Router A is connected as a BGP neighbor to routers B and C. Which path does router A use to get to AS 65010?
A. Through router C because it has a higher local preference
B. Will load balance because both routes have the same Med value
C. Through router B because it has the shortest AS path
D. Through router B because the default local preference is 500 and higher than router C
Answer: A
New Questions 9
R1#showip ospfinterface FastEthernet0/0.12
...Network Type
Non_BROADCAST...
...
R2#showip ospfinterface FastEthernet0/0.12
...Network Type BROADCAST...
...
Refer to the exhibit. OSPF is configured on R1 and R2 as shown. which action can you take to allow a
neighbor relationship to be established.
A. On R1, change the process ID to 1
B. On R1, set the network type of the FastEthernet0/0.12 interface to broadcast
C. Configure R1 and R2 as neighbors using interface addresses
D. Configure R1 and R2 as neighbors using router IDs
Answer: B
New Questions 10
Refer to the exhibit.
Router A is connected as a BGP neighbor to routers B and C. which path does router A use to get to AS 65010?
A. through router B because it has the shortest AS path
B. through router B because the default local preference is 500 and higher than router C
C. will load balance because both routers have the same Med value
D. through router C because it has a higher local preference
Answer: D
New Questions 11
ESTION NO: 280
Refer to the exhibit. The route-map wan2site is being used for redistributing BGP routes into the eigrp 28 process Which option best describes the resulting redistribution of routes?
A. Poliu00e7ying routing matches: 0 packets means that there are no matches and no routes are being redistributed
B. A default route is being redistributed with a metric and a tag
C. The deny sequence 5 is preventing any routes from being redistributed
D. AII routes are being redistributed with a metric and a tag
Answer: C
New Questions 12
Refer to :
Which statement is true about a valid IPv6 address that can be configured on tunnel interface0?
A. 2001:7DCB:5901::/128 is a valid IPv6 address
B. There is not enough information to calculate the IPv6 address
C. 6to4 tunneling allows you to use any IPv6 address
D. 2002:7DCB:5901::/128 is a valid IPv6 address
Answer: D
New Questions 13
Which three statements are true about PPP CHAP authentication? (choose three.)
A. PPP encapsulation must be enabled globally.
B. The LCP phase must be complete and in closed state.
C. The hostname used by a router for CHAP authentication cannot be changed.
D. PPP encapsulation must be enabled on the interface.
E. The LCP phase must be complete and in open state.
F. By default, the router uses its hostname to identify itself to the peer.
Answer: D,E,F
New Questions 14
which type of access-list will allow incoming traffic for sessions that originated from within your network?
A. reflexive ACLs
B. time-based ACLs
C. dynamic ACLs
D. standard ACLs
Answer: A
New Questions 15
In Which 802.1D port state are the root bridge, the root part, and the designated ports elected?
A. Disabled
B. Blocking
C. Learning
D. Forwarding
E. Listening
Answer: D
New Questions 16
Refer to the exhibit.
After you apply the given configurations to R1 and R2.which networks does R2 advertise to R1?
A. both 172 16.32.0/20 and 172 16.33.0/24
B. 172.16.32.0/20 only
C. 172.16.0.0/16 only
D. 172.16.33.0/24 only
Answer: C
New Questions 17
Refer to the exhibit.
R1#sh ip eigrp top all
IP-EIGRP Topology Table for AS (192.168.13.1)
Codes: P - Passive, A - Active, U - Update, Q- Query, R - Reply, r - reply Status, s - sia Status
P 10.0.0.0/8, 1 successors, FD is 3586560, serno 8 via 192.168.1.5 (3586560/3074560), Serial0/0
P 192.168.100.0/24, 2 successors, FD is 409600, serno 5 via 192.168.13.3 (409600/128256), FastEthernet0/1
via 192.168.12.3 (435200/409600), FastEthernet0/0
Which statement about the 192.168.100.0/24 destination network is true.
A. The neighbors fail to meet the feasibility condition.
B. The reporting distance for the feasible successor is 49000
C. The reporting distance for the successor is 409600
D. The reported distance is too small to support a feasible successor route
Answer: A
100% Avant-garde Cisco 400-101 Questions & Answers shared by Dumpscollection, Get HERE: http://www.dumpscollection.net/dumps/400-101/ (New 911 Q&As)