Just click on the mouse with Pass4sure and each of our workers confirm your payment, you will get the instant access towards the whole Microsoft 70-410 training materials. Help make full utilization of the totally free Pdf demos. Download the analyze engine software in your PC and practice your test daily. Make information on the errors and pay more attention in them. Many of us promise that you simply will get yourself a high passing indicate based on each of our updated Microsoft Microsoft exam braindumps.
2021 Mar 70-410 latest exam
Q21. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Web Server (US) server role installed.
Server1 has a web site named Web1. Web1 is configured to use digest authentication.
You need to ensure that a user named User1 can access Web1.
What should you do from Active Directory Users and Computers?
A. From the properties of User1, select Store password using reversible encryption.
B. From the properties of User1, select Use Kerberos DES encryption types for this account.
C. From the properties of Server1, select Trust this computer for delegation to any service (Kerberos only).
D. From the properties of Server1, assign the Allowed to Authenticate permission to User1.
Answer: A
Explanation:
Challenge Handshake Authentication Protocol (CHAP) is a basic level of iSCSI security that is used to authenticate the peer of a connection and is based upon the peers sharing a secret: that secret being a password. To make sure that User1 can connect to the server, you should use Active Directory Users and Computers to store that password.
Q22. - (Topic 1)
Your company has a main office and two branch offices. The offices connect to each other by using a WAN link.
In the main office, you have a server named Server1 that runs Windows Server 2012 R2.
Server1 is configured to use an IPv4 address only.
You need to assign an IPv6 address to Server1. The IP address must be private and routable.
Which IPv6 address should you assign to Server1?
A. fe80:ab32:145c::32cc:401b
B. ff00:3fff:65df:145c:dca8::82a4
C. 2001:ab32:145c::32cc:401b
D. fd00:ab32:14:ad88:ac:58:abc2:4
Answer: D
Explanation:
Unique local addresses are IPv6 addresses that are private to an organization in the same way that private addresses–such as 10.x.x.x, 192.168.x.x, or 172.16.0.0 172.31.255.255–can be used on an IPv4 network. Unique local addresses, therefore, are not routable on the IPv6 Internet in the same way that an address like 10.20.100.55 is not routable on the IPv4 Internet. A unique local address is always structured as follows: The first 8 bits are always 11111101 in binary format. This means that a unique local address always begins with FD and has a prefix identifier of FD00::/8.
Q23. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.
Contoso.com has a Hyper-V server, named ENSUREPASS-SR13, which hosts multiple virtual machines.
You have enabled the use of Single-root I/O virtualization.
Which of the following is TRUE with regards to using Single-root I/O virtualization? (Choose all that apply.)
A. It maximizes network throughput, while minimizing network latency.
B. It maximizes network throughput, as well as network latency.
C. It avoids the virtual switch stack and allows the virtual machine direct access to the actual network switch.
D. It prevents the virtual machine from accessing the network switch directly.
Answer: A,C
Explanation:
SR-IOV enables network traffic to bypass the software switch layer of the Hyper-V virtualizationstack. Because the VF is assigned to a child partition, the network traffic flows directly between the VF and child partition. As a result, the I/O overhead in the software emulation layer is diminished and achieves network performance that is nearly the same performance as in nonvirtualized environments.
Q24. DRAG DROP - (Topic 3)
You plan to deploy a DHCP server that will support four subnets. The subnets will be configured as shown in the following table:
You need to identify which network ID you should use for each subnet. What should you identify? To answer, drag the appropriate network ID to the each subnet in the answer area.
Answer:
Q25. - (Topic 3)
You have a server that runs Windows Server 2012 R2. The server contains the disks configured as shown in the following table.
You need to create a volume that can store up to 3 TB of user files. The solution must ensure that the user files are available if one of the disks in the volume fails. What should you create?
A. a storage pool on Disk 2 and Disk 3
B. a spanned volume on Disk 2 and Disk 3
C. a mirrored volume on Disk 1 and Disk 3
D. a mirrored volume on Disk 2 and Disk 3
E. a RAID-5 volume on Disk 1, Disk 2, and Disk 3
F. a storage pool on Disk 1 and Disk 3
G. a spanned volume on Disk 0 and Disk 4
H. a mirrored volume on Disk 1 and Disk 4
Answer: D
Updated 70-410 exam cram:
Q26. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. New-StorageSubsytemVirtualDisk
B. File Server Resource Manager (FSRM)
C. Server Manager
D. Computer Management
Answer: A
Explanation:
For other questions to create a VHD (file) you can use computer management.
-Share and storage management (2008 only)
-New-storagesubsystemVirtualDisk (this is a virtual disk, NOT a virtual hard disk)
-Server Manager (you would use this to create virtual disks, not virtual hard disks)
Q27. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
On a server named Server2, you perform a Server Core Installation of Windows Server 2012 R2. You join Server2 to the contoso.com domain.
You need to ensure that you can manage Server2 by using the Computer Management console on Server1.
What should you do on Server2?
A. Install Windows Management Framework.
B. Run sconfig.exe and configure Remote Server Administration Tools (RSAT).
C. Install Remote Server Administration Tools (RSAT).
D. Run sconfig.exe and configure remote management.
Answer: D
Explanation:
In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. You must be a member of the Administrators group to use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server with a GUI mode.
References: http://technet.microsoft.com/en-us/library/jj647766.aspx Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 2: Deploying servers, p. 80
Q28. HOTSPOT - (Topic 3)
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server2 has the Windows Deployment Services server role installed.
On Server1, you have a virtual machine named VM1.
You plan to deploy an image to VM1 by using Windows Deployment Services (WDS).
You need to ensure that VM1 can connect to Server1 by using PXE.
Which settings should you configure on VM1? To answer, select the appropriate settings in
the answer area.
Answer:
Q29. - (Topic 2)
Your network contains an Active Directory domain named contoso.com.
You install Windows Server 2012 R2 on a new server named Server1 and you join Server1 to the domain.
You need to ensure that you can view processor usage and memory usage information in Server Manager.
What should you do?
A. From Server Manager, click Configure Performance Alerts.
B. From Performance Monitor, create a Data Collector Set (DCS).
C. From Performance Monitor, start the System Performance Data Collector Set (DCS).
D. From Server Manager, click Start Performance Counters.
Answer: D
Explanation:
You should navigate to the Server Manager snap-in and there click on All Servers, and then Performance Counters. The Performance Counters, when started can be set to collect and display data regarding processor usage, memory usage, amongst many other resources like disk-related and security related data, that can be monitored.
: http://technet.microsoft.com/en-us/library/bb734903.aspx
Q30. - (Topic 1)
Your network contains a server named Server1 that runs Windows Server 2012
R2.Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
You install a network monitoring application on VM2.
You need to ensure that all of the traffic sent to VM3 can be captured on VM2.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: J
Explanation:
With Hyper-V Virtual Switch port mirroring, you can select the switch ports that are monitored as well as the switch port that receives copies of all the traffic. And since Port mirroring allows the network traffic of a virtual machine to be monitored by copying the traffic and forwarding it to another virtual machine that is configured for monitoring, you should configure port mirroring on VM2.
: http://technet.microsoft.com/en-us/library/jj679878.aspx#bkmk_portmirror