Want to know Exambible 70-410 Exam practice test features? Want to lear more about Microsoft Installing and Configuring Windows Server 2012 certification experience? Study Simulation Microsoft 70-410 answers to Latest 70-410 questions at Exambible. Gat a success with an absolute guarantee to pass Microsoft 70-410 (Installing and Configuring Windows Server 2012) test on your first attempt.
2021 Dec 70-410 exam topics
Q201. - (Topic 3)
You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
You are running a training exercise for junior administrators. You are currently discussing spanned volumes.
Which of the following is TRUE with regards to spanned volumes? (Choose all that apply.)
A. Spanned volumes do not provide fault tolerance.
B. Spanned volumes are a fault tolerant solution.
C. You can extend a spanned volume onto a maximum of 16 dynamic disks.
D. You cannot create a spanned volume using a system volume or boot volume.
Answer: A,D
Explanation:
A spanned volume is a dynamic volume consisting of disk space on more than one physical disk. If a simple volume is not a system volume or boot volume, you can extend it across additional disks (up to 32 total) to create a spanned volume, or you can create a spanned volume in unallocated space on a dynamic disk. You need at least two dynamic disks in addition to the startup disk to create a spanned volume. You can extend a spanned volume onto a maximum of 32 dynamic disks. Spanned volumes are not fault tolerant.
Q202. HOTSPOT - (Topic 1)
You have a DHCP server named Server1 that runs Windows Server 2012 R2. On Server1, you run the commands as shown in the exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.
Answer:
Q203. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Both servers are member servers.
On Server2, you install all of the software required to ensure that Server2 can be managed remotely from Server Manager.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform on Server2? (Each correct answer presents part of the solution.Choose two.)
A. Run the systempropertiesremote. execommand.
B. Run the Fnable-PsRemoting cmdlet.
C. Run the Enable-PsSessionConfigurationcmdlet.
D. Run the Confiqure-SMRemoting.ps1script.
E. Run the Set-ExecutionPolicycmdlet.
Answer: D,E
Explanation:
The output of this command indicates whether Server Manager Remoting is enabled or disabled on the server. To configure Server Manager remote management by using Windows PowerShell On the computer that you want to manage remotely, open a Windows PowerShell session with elevated user rights.To do this, click Start, click All Programs, click Accessories, click Windows PowerShell, right-click the Windows PowerShell shortcut, and then click Run as administrator. In the Windows PowerShell session, type the following, and then press Enter. Set-ExecutionPolicy -ExecutionPolicyRemoteSigned Type the following, and then press Enter to enable all required firewall rule exceptions. Configure-SMRemoting.ps1 -force –enable.
Q204. - (Topic 3)
Which of the following group scope modifications are never permitted? (Choose all answers that are correct.)
A. Global to universal
B. Global to domain local
C. Universal to global
D. Domain local to universal
Answer: B
Explanation:
A. Incorrect: Global to universal group conversions are sometimes permitted.
B. Correct: Global to domain local group conversions are never permitted.
C. Incorrect: Universal to global group conversions are sometimes permitted.
D. Incorrect: Domain local to universal group conversions are sometimes permitted.
Q205. - (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Print and Document Services server role installed.
Server1 is connected to two identical print devices.
The solution must ensure that if one print device fails, the print jobs will print automatically on the other print device.
What should you do on Server1?
A. Add two printers and configure the priority of each printer.
B. Add one printer and configure printer pooling.
C. Install the Network Load Balancing (NLB) feature, and then add one printer.
D. Install the Failover Clustering feature, and then add one printer
Answer: B
Explanation:
A. expedite documents that need to be printed immediately
B. A printing pool is one logical printer connected to multiple printers through multiple ports of the print server. The printer that is idle receives the next document sent to the logical printer. When printing to a printer pool, the spooler will send waiting jobs to alternate ports. If the original or alternate ports are not available
C. NLB for printing is not supported D. Would need 2 nodes A printing pool is one logical printer connected to multiple printers through multiple ports of the print server. The printer that is idle receives the next document sent to the logical printer. This is useful in a network with a high volume of printing because it decreases the time users wait for their documents. A printing pool also simplifies administration because multiple printers can be managed from the same logical printer on a server. If one device within a pool stops printing, the current document is held at that device. The succeeding documents print to other devices in the pool, while the delayed document waits until the nonfunctioning printer is fixed. Efficient printer pools have the following characteristics: All printers in the pool are the same model. Printer ports can be of the same type or mixed (parallel, serial, and network). It is recommended that all printers be in one location. Because it is impossible to predict which printer will receive the document, keep all printers in a pool in a single location. Otherwise, users might have a hard time finding their printed document. http://technet.microsoft.com/en-us/library/cc757086(v=ws.10).aspx http://technet.microsoft.com/en-us/library/ cc784619(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc958172.aspx You can create a printing pool to automatically distribute print jobs to the next available printer. A printing pool is one logical printer connected to multiple printers through multiple ports of the print server. The printer that isidle receives the next document sent to the logical printer.
Avant-garde 70-410 exam price:
Q206. HOTSPOT - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2.
Several users are members of the local Administrators group.
You need to ensure that all local administrators receive User Account Control (UAC)
prompts when they run a Microsoft Management Console (MMC).
Which settings should you modify from the Local Security Policy? To answer, select the
appropriate settings in the answer area.
Answer:
Q207. - (Topic 1)
Your network contains an Active Directory forest named contoso.com. All domain controllers currently run Windows Server 2008 R2.
You plan to install a new domain controller named DC4 that runs Windows Server 2012 R2.
The new domain controller will have the following configurations:
Schema master
Global catalog server
Active Directory Federation Services server role
Active Directory Certificate Services server role
You need to identify which configuration can be fulfilled by using the Active Directory Domain Services Configuration Wizard.
Which configuration should you identify?
A. Enable the global catalog server.
B. Install the DNS Server role.
C. Install the Active Directory Certificate Services role.
D. Transfer the schema master.
Answer: A
Q208. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 installed.
You have been instructed to modify the name of the local Administrator account on all Contoso.com workstations. You want to achieve this using as little administrative effort as possible.
Which of the following actions should you take?
A. You should consider configuring the Security Options settings via the Group Policy Management Console (GPMC).
B. You should consider navigating to Local Users and Groups via Computer
C. You should consider configuring the replication settings.
D. You should consider navigating to Local Users and Groups via Computer Management on each workstation.
Answer: A
Explanation:
Rename administrator account policy setting determines whether a different account name is associated with the security identifier (SID) for the Administrator account. Because the Administrator account exists on all Windows server versions, renaming the account makes it slightly more difficult for attackers to guess this user name and password combination. By default, the built-in Administrator account cannot be locked out no matter how many times a malicious user might use a bad password. This makes the Administrator account a popular target for brute-force password-guessing attacks. The value of this countermeasure is lessened because this account has a well-known SID and there are non-Microsoft tools that allow you to initiate a brute-force attack over the network by specifying the SID rather than the account name. This means that even if you have renamed the Administrator account, a malicious user could start a brute-force attack by using the SID. Rename the Administrator account by specifying a value for the Accounts: Rename administrator account policy setting. Location: GPO_name\Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Options
Q209. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains 100 user accounts that reside in an organizational unit (OU) named 0U1. You need to ensure that a user named User1 can link and unlink Group Policy objects (GPOs) to OU1. The solution must minimize the number of permissions assigned to User1.
What should you do?
A. Modify the permissions on OU1.
B. Run the Set-GPPermission cmdlet.
C. Add User1 to the Group Policy Creator Owners group.
D. Modify the permissions on the User1 account.
Answer: A
Explanation:
Q210. - (Topic 1)
You have a Hyper-V host named Host1 that connects to a SAN by using a hardware Fibre Channel adapter.
Host1 contains two virtual machines named VM1 and VM2.
You need to provide VM1 with direct access to the SAN. VM2 must not require access to the SAN.
Which two configurations should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On VM1, configure a Fibre Channel adapter.
B. On Host1, configure a new virtual switch.
C. On VM1, add a network adapter.
D. On Host1, configure a new Virtual Fibre Channel SAN.
E. On Host1, modify the Hyper-V settings.
Answer: A,D
Explanation:
Step 1:
D. Building a Virtual SAN The process of setting up virtual Fibre Channel starts with building a virtual SAN. The easiest way to accomplish this is to open the Hyper-V Manager, right click on the listing for your Hyper-V server in the console tree, and then choose the Virtual SAN Manager command from the shortcut menu. Step 2:
A. Once you have created a virtual SAN, the next step in the process is to link a virtual machine to the virtual SAN. To do so, right click on the virtual machine for which you want to provide Fibre Channel connectivity and select the Settings command from the resulting shortcut menu. Next, select the Add Hardware container, as shown in the figure above, and then select the Fibre Channel Adapter option from the list of available hardware. Etc. Note:
* Virtual Fibre Channel for Hyper-V (also referred to as Synthetic Fibre Channel) provides VM guest operating systems with direct access to a Fibre Channel SAN by using a standard World Wide Name (WWN) associated with a virtual machine.