It is impossible to pass Microsoft 70-412 exam without any help in the short term. Come to Exambible soon and find the most advanced, correct and guaranteed Microsoft 70-412 practice questions. You will get a surprising result by our Up to the minute Configuring Advanced Windows Server 2012 Services practice guides.

2021 Mar 70-412 free download

Q71. HOTSPOT 

You have a server named Server1 that runs Windows Server 2012 R2. 

You are configuring a storage space on Server1. 

You need to ensure that the storage space supports tiered storage. 

Which settings should you configure? 

To answer, select the appropriate options in the answer area. 

Answer: 


Q72. You have a server named Server1 that runs Windows Server 2012 R2 and is used for testing. 

A developer at your company creates and installs an unsigned kernel-mode driver on Server1. The developer reports that Server1 will no longer start. 

You need to ensure that the developer can test the new driver. The solution must minimize the amount of data loss. 

Which Advanced Boot Option should you select? 

A. Disable Driver Signature Enforcement 

B. Disable automatic restart on system failure 

C. Last Know Good Configuration (advanced) 

D. Repair Your Computer 

Answer:

Explanation: 

A. By default, 64-bit versions of Windows Vista and later versions of Windows will load a kernel-mode driver only if the kernel can verify the driver signature. However, this default behavior can be disabled to facilitate early driver development and non-automated testing. 

Incorrect: 

Not B. specifies that Windows automatically restarts your computer when a failure occurs. 

Not C. Developer would not be able to test the driver as needed. 

Not D. Removes or repairs critical windows files, Developer would not be able to test the 

driver as needed and some file loss. 

Reference: Installing Windows Server 2012. 

http://technet.microsoft.com/en-us/library/jj134246.aspx 

http://msdn.microsoft.com/en-us/library/windows/hardware/ff547565(v=vs.85).aspx 


Q73. Your network contains one Active Directory forest named contoso.com. The forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table. 

You need to prevent administrators from accidentally deleting any of the sites in the forest. What should you use? 

A. Set-ADSite 

B. Set-ADReplicationSite 

C. Set-ADDomain 

D. Set-ADReplicationSiteLink 

E. Set-ADGroup 

F. Set-ADForest 

G. Netdom 

Answer:

Explanation: The Set-ADReplicationSite sets the replication properties for an Active 

Directory site. 

Parameter: -ProtectedFromAccidentalDeletion<Boolean> 

Specifies whether to prevent the object from being deleted. When this property is set to 

$True, you cannot delete the corresponding object without changing the value of the 

property. The acceptable values for this parameter are: 

-- $False or 0 

-- $True or 1 

Reference: Technet, Set-ADReplicationSite 

https://technet.microsoft.com/en-us/library/hh852305(v=wps.630).aspx 


Q74. Your network contains an Active Directory domain named contoso.com. 

You deploy a server named Server1 that runs Windows Server 2012 R2. 

A local administrator installs the Active Directory Rights Management Services server role 

on Server1. 

You need to ensure that AD RMS clients can discover the AD RMS cluster automatically. 

What should you do? 

A. Run the Active Directory Rights Management Services console by using an account that is a member of the Schema Admins group, and then configure the proxy settings. 

B. Run the Active Directory Rights Management Services console by using an account that is a member of the Schema Admins group, and then register the Service Connection Point (SCP). 

C. Run the Active Directory Rights Management Services console by using an account that is a member of the Enterprise Admins group, and then register the Service Connection Point (SCP). 

D. Run the Active Directory Rights Management Services console by using an account that is a member of the Enterprise Admins group, and then configure the proxy settings. 

Answer:

Explanation: 

* The Active Directory Rights Management Services (AD RMS) Service Connection Point (SCP) is an object in Active Directory that holds the web address of the AD RMS certification cluster. AD RMS-enabled applications use the SCP to discover the AD RMS service; it is the first connection point for users to discover the AD RMS web services. 

* To register the SCP you must be a member of the local AD RMS Enterprise Administrators group and the Active Directory Domain Services (AD DS) Enterprise Admins group, or you must have been given the appropriate authority. 

Reference: The AD RMS Service Connection Point 


Q75. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers have the IP Address Management (IPAM) Server feature installed. 

You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1 and Server2. 

You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2. 

To which group on Server2 should you add Tech1? 

A. IPAM MSM Administrators 

B. IPAM Administrators 

C. winRMRemoteWMIUsers_ 

D. Remote Management Users 

Answer:

Explanation: 

If you are accessing the IPAM server remotely using Server Manager IPAM client RSAT, then you must be a member of the WinRMRemoteWMIUsers group on the IPAM server, in addition to being a member of the appropriate IPAM security group (or local Administrators group). 

Reference: IPAM Deployment Planning, IPAM specifications 


Regenerate 70-412 rapidshare:

Q76. You have a server named Server1 that runs Windows Server 2012 R2. 

Server1 is backed up by using Windows Server Backup. The backup configuration is shown in the exhibit. (Click the Exhibit button.) 

You discover that only the last copy of the backup is maintained. You need to ensure that multiple backup copies are maintained. What should you do? 

A. Modify the backup destination. 

B. Configure the Optimize Backup Performance settings. 

C. Modify the Volume Shadow Copy Service (VSS) settings. 

D. Modify the backup times. 

Answer:

Explanation: 

The destination in the exhibit shows a network share is used. If a network share is being used only the latest copy will be saved 

Reference: Where should I save my backup? http://windows.microsoft.com/en-us/windows7/where-should-i-save-my-backup 


Q77. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role installed. 

Server1 has a zone named contoso.com. The zone is configured as shown in the exhibit. (Click the Exhibit button.) 

You need to assign a user named User1 permission to add and delete records from the contoso.com zone only. 

What should you do first? 

A. Enable the Advanced view from DNS Manager. 

B. Add User1 to the DnsUpdateProxy group. 

C. Run the New Delegation Wizard. 

D. Configure the zone to be Active Directory-integrated. 

Answer:

Explanation: 

Secure dynamic updates are only supported or configurable for resource records in zones that are stored in Active Directory Domain Services (AD DS). 

Note: To modify security for a resource record 

Open DNS Manager. 

In the console tree, click the applicable zone. 

In the details pane, click the record that you want to view. 

On the Action menu, click Properties. 

On the Security tab, modify the list of member users or groups that are allowed to 

securely update the applicable record and reset their permissions as needed. 

Reference: Modify Security for a Resource Record 


Q78. Your network contains an Active Directory domain named contoso.com. The domain contains a file server named File1 that runs a Server Core Installation of Windows Server 2012 R2. 

File1 has a volume named D that contains home folders. File1 creates a shadow copy of volume D twice a day. 

You discover that volume D is almost full. 

You add a new volume named H to File1. 

You need to ensure that the shadow copies of volume D are stored on volume H. 

Which command should you run? 

A. The Set-Volume cmdlet with the -driveletter parameter 

B. The vssadmin.exe create shadow command 

C. The Set-Volume cmdlet with the -path parameter 

D. The vssadmin.exe add shadowstorage command 

Answer:

Explanation: 

Add ShadowStorage 

Adds a shadow copy storage association for a specified volume. 

Incorrect: 

Not A. Sets or changes the file system label of an existing volume. -DriveLetter Specifies a 

letter used to identify a drive or volume in the system. 

Not B. Create Shadow 

Creates a new shadow copy of a specified volume. 

Not C. Sets or changes the file system label of an existing volume -Path Contains valid 

path information. 

Reference: Vssadmin; Set-Volume 

http://technet.microsoft.com/en-us/library/cc754968(v=ws.10).aspx 

http://technet.microsoft.com/en-us/library/hh848673(v=wps.620).aspx 


Q79. Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are configured as shown in the following table. 

You need to ensure that when new targets are added to Server1, the targets are registered on Server2 automatically. 

What should you do on Server1? 

A. Configure the Discovery settings of the iSCSI initiator. 

B. Configure the security settings of the iSCSI target. 

C. Run the Set-WmiInstance cmdlet. 

D. Run the Set-IscsiServerTarget cmdlet. 

Answer:

Explanation: 

Explanation/Reference: 

Manage iSNS server registration 

The iSNS server registration can be done using the following cmdlets, which manages the 

WMI objects. 

To add an iSNS server: 

Set-WmiInstance -Namespace root\wmi -Class WT_iSNSServer –Arguments 

@{ServerName="ISNSservername"} 

Note: The Set-WmiInstance cmdlet creates or updates an instance of an existing WMI 

class. The created or updated instance is written to the WMI repository. 

Reference: iSCSI Target cmdlet reference 

http://blogs.technet.com/b/filecab/archive/2012/06/08/iscsi-target-cmdlet-reference.aspx 


Q80. Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured as a standalone certification authority (CA). 

You install a second server named Server2. You install the Online Responder role service on Server2. 

You need to ensure that Server1 can issue an Online Certificate Status Protocol (OCSP) Response Signing certificate to Server2. 

What should you run on Server1? 

A. The certreq.exe command and specify the -policy parameter 

B. The certutil.exe command and specify the -getkey parameter 

C. The certutil.exe command and specify the -setreg parameter 

D. The certreq.exe command and specify the -retrieve parameter 

Answer:

Explanation: To prepare a computer running Windows Server to issue OCSP Response Signing certificates 

On the server hosting the CA, open a command prompt, and type: certutil -v -setreg policy\EnableRequestExtensionList +1.3.6.1.5.5.7.48.1.5 Stop and restart the CA. You can do this at a command prompt by running the following commands: net stop certsvc 

net start certsvc 

Reference: Configure a CA to Support OCSP Responders 

https://technet.microsoft.com/en-us/library/cc732526.aspx