All the Microsoft 70-417 exam dumps are usually designed simply by our committed check preparers. They have wealthy experience throughout compiling the Microsoft Microsoft exam questions and also answers. Our authorities also update the particular Microsoft 70-417 simulated demos in occasion. You should visit Exambibles property page and also download the latest Microsoft 70-417 exam practice questions. We offer that you can get the Microsoft certificate smoothly. 99% candidates possess passed the particular exam after using full benefit of our Microsoft 70-417 studying supplies. You dont must worry about the particular quality associated with our Microsoft Microsoft products.
2021 Dec 70-417 exam answers
Q191. Your network contains an Active Directory domain named contoso.com. The domain
contains three servers named Server1, Server2, and Server3.
You create a server group named ServerGroup1.
You discover the error message shown in the following exhibit. (Click the Exhibit button.)
You need to ensure that Server2 can be managed remotely by using Server Manager.
What should you do?
A. On Server2, run the netdom.exe command.
B. On Server2, run the net stop netlogon command, and then run the net start netlogon command.
C. On DC1, run the Enable-PSSessionConfigurationcmdlet.
D. On Server2, modify the membership of the Remote Management Users group.
Answer: D
Explanation:
This is a security issue. To be able to access Server2 remotely through Server Manager the user need to be a member of the Remote Management Users group. References: Training Guide: Installing and Configuring Windows Server 2012, Chapter 3 Server Remote Management, Lesson 1: Server Manager, p. 90-92
Q192. Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers have the Hyper-V server role installed.Server1 and Server2 are located in different offices. The offices connect to each other by using a high-latency WAN link.
Server2 hosts a virtual machine named VM1.
You need to ensure that you can start VM1 on Server1 if Server2 fails. The solution must minimize hardware costs.
What should you do?
A. From the Hyper-V Settings of Server2, modify the Replication Configuration settings. Enable replication for VM1.
B. On Server1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.
C. On Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.
D. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enable replication for VM1.
Answer: D
Explanation:
You first have to enable replication on the Replica server--Server1--by going to the server and modifying the "Replication Configuration" settings under Hyper-V settings. You then go to VM1--which presides on Server2-- and run the "Enable Replication" wizard on VM1.
Q193. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role installed.
Server1 has a zone named contoso.com. The zone is configured as shown in the exhibit. (Click the Exhibit button.)
You need to assign a user named User1 permission to add and delete records from the contoso.com zone only.
What should you do first?
A. Enable the Advanced view from DNS Manager.
B. Add User1 to the DnsUpdateProxy group.
C. Run the New Delegation Wizard.
D. Configure the zone to be Active Directory-integrated.
Answer: D
Q194. Your network contains an Active Directory forest named contoso.com. The forest contains four domains. All servers run Windows Server 2012 R2.
Each domain has a user named User1.
You have a file server named Server1 that is used to synchronize user folders by using the
Work Folders role service.
Server1 has a work folder named Sync1.
You need to ensure that each user has a separate folder in Sync1.
What should you do?
A. From Windows Explorer, modify the Sharing properties of Sync1
B. Run the Set-SyncServerSetting cmdlet
C. From File and Storage Services in Server Manager, modify the properties of Sync1
D. Run the Set-SyncShare cmdlet
Answer: D
Q195. Your network contains a server named Server1 that runs Windows Server 2012. Server1
has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
You plan to schedule a complete backup of Server1 by using Windows Server Backup.
You need to ensure that the state of VM1 is saved before the backup starts.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: I
Explanation:
http://www.altaro.com/hyper-v/vss-crash-consistent-vs-Application-consistent-vss-backupspost-2- of-2/ Backup Operations in Hyper-V No VSS Writer Available? In some cases, you need an Application-consistent backup but there is no VSS writer available. One example of this is MySQL. Hyper-V backups of virtual machines containing MySQL will always result in either a crashconsistent or an image-level backup. For MySQL, the latter is probably acceptable as MySQL doesn't perpetually expand the log file. However, if you're using MySQL within a VSS-aware VM, then a Hyper-Vbased backup tool is going to take a crash-consistent backup. MySQL (like any other database system) isn't always recoverable from a crash-consistent backup; tool is going to take a crash-consistent backup. MySQL (like any other database system) isn't always recoverable from a crash-consistent backup; even when recovery is possible, it may be painful. MySQL is just one example; any number of line-of-business Applications could tell a similar tale. In the case of MySQL, one solution is to find a guest-level backup Application that is MySQL- aware and can back it up properly. For Applications for which no backup Application has a plug-in, you may need to have pre-and post-backup scripts that stop services or close Applications. If brief downtime is acceptable, you can disable the Backup item in Hyper-V Integration Services, thereby forcing Hyper-V to save the state of the VM during backup. This technique results in an image-level backup and can
be used on any Application that doesn't have a VSS writer.
Abreast of the times 70-417 torrent:
Q196. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
On all of the domain controllers, Windows is installed in C:\Windows and the Active Directory database is located in D:\Windows\NTDS\.
All of the domain controllers have a third-party application installed.
The operating system fails to recognize that the application is compatible with domain controller cloning.
You verify with the application vendor that the application supports domain controller cloning.
You need to prepare a domain controller for cloning.
What should you do?
A. In C:\Windows\, create an XML file named DCCIoneConfig.xml and add the application information to the file.
B. In the root of a USB flash drive, add the application information to an XML file named DefaultDCCIoneAllowList.xml.
C. In D:\Windows\NTDS\, create an XML file named DCCIoneConfig.xml and add the application information to the file.
D. In D:\Windows\NTDS\, create an XML file named CustomDCCIoneAllowList.xml and add the application information to the file.
Answer: D
Explanation:
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directory-domainservices-in-windows-server-2012-part-13-domain-controller-cloning.aspx Place the CustomDCCloneAllowList.xml file in the same folder as the Active Directory database (ntds.dit) on the source Domain Controller.
Q197. OTSPOT
Your network contains two Hyper-V hosts that are configured as shown in the following table.
You create a virtual machine on Server1 named VM1.
You plan to export VM1 from Server1 and import VM1 to Server2.
You need to ensure that you can start the imported copy of VM1 from snapshots.
What should you configure on VM1?
To answer, select the appropriate node in the answer area.
Answer:
19. You have a virtual machine named VM1 that runs on a host named Host1.
You configure VM1 to replicate to another host named Host2. Host2 is located in the same physical location as Host1.
You need to add an additional replica of VM1. The replica will be located in a different physical site.
What should you do?
A. From VM1 on Host2, click Extend Replication.
B. On Host1, configure the Hyper-V settings.
C. From VM1 on Host1, click Extend Replication.
D. On Host2, configure the Hyper-V settings.
Answer: A
Explanation:
http://blogs.technet.com/b/virtualization/archive/2013/12/10/hyper-v-replica-extend-replication.aspx Once that is done, go to replica site and from Hyper-V UI manager select the VM for which you want to extend the replication. Right click on VM and select “Replication->Extend Replication …”. This will open Extend Replication Wizard which is similar to Enable Replication Wizard. http://technet.microsoft.com/en-us/library/dn551365.aspx http://technet.microsoft.com/en-us/library/jj134240.aspx NOTE: You configure a server to receive replication with Hyper-V Manager, in this situation the replica site is assumed to be the Replica Server. Therefore you extend replication from VM1 on Host2.
Q198. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 contains a virtual machine named VM1 that runs Windows Server 2012 R2.
You need to ensure that a user named User1 can install Windows features on VM1. The solution must minimize the number of permissions assigned to User1.
To which group should you add User1?
A. Server Operators on Server1
B. Power Users on VM1
C. Administrators on VM1
D. Hyper-V Administrators on Server1
Answer: D
Explanation: * The Hyper-V role enables you to create and manage a virtualized computing environment by using virtualization technology that is built in to Windows Server 2012. Hyper-V virtualizes hardware to provide an environment in which you can run multiple operating systems at the same time on one physical computer, by running each operating system in its own virtual machine.
* Simplified authorization
The Hyper-V Administrators group is introduced in Windows Server 2012 and is
implemented as a local security group.
What value does this change add?
This group can reduce the number of users that belong to the local Administrators group
while providing users with access to Hyper-V.
What works differently?
The Hyper-V Administrators group is a new local security group. Add users to this group
instead of the local Administrators group to provide them with access to Hyper-V. Members
of the Hyper-V Administrators have complete and unrestricted access to all features of
Hyper-V.
Reference: What's New in Hyper-V for Windows Server 2012
Q199. Your network contains an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Active Directory Federation Services server role installed.Server2 is a file server.
Your company introduces a Bring Your Own Device (BYOD) policy.
You need to ensure that users can use a personal device to access domain resources by using Single Sign-On (SSO) while they are connected to the internal network.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Enable the Device Registration Service in Active Directory.
B. Publish the Device Registration Service by using a Web Application Proxy.
C. Configure Active Directory Federation Services (AD FS) for the Device Registration Service.
D. Install the Work Folders role service on Server2.
E. Create and configure a sync share on Server2.
Answer: A,C
Explanation: *Prepare your Active Directory forest to support devices This is a one-time operation that you must run to prepare your Active Directory forest to support devices. To prepare the Active Directory forest On your federation server, open a Windows PowerShell command window and type: Initialize-ADDeviceRegistration *Enable Device Registration Service on a federation server farm node To enable Device Registration Service 1.On your federation server, open a Windows PowerShell command window and type: Enable-AdfsDeviceRegistration 2.Repeat this step on each federation farm node in your AD FS farm.
Q200. OTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that has the Network Policy Server server role installed. The domain contains a server named Server2 that is configured for RADIUS accounting.
Server1 is configured as a VPN server and is configured to forward authentication requests to Server2.
You need to ensure that only Server2 contains event information about authentication requests from connections to Server1.
Which two nodes should you configure from the Network Policy Server console?
To answer, select the appropriate two nodes in the answer area.
Answer: