It is more faster and easier to pass the Microsoft 70 680 practice test exam by using Realistic Microsoft TS:Windows 7,Configuring questuins and answers. Immediate access to the Abreast of the times 70 680 exam Exam and find the same core area exam 70 680 questions with professionally verified answers, then PASS your exam with a high score now.

Q111. - (Topic 6) 

You have a computer that runs a 32-bit version of Windows 7 Home Premium. The computer has a single partition on a single hard disk drive. 

You want to test a 64-bit version of Windows 7 Ultimate. You configure the computer for a dual boot with previously installed Windows 7 Home Premium. 

You need to configure the computer to support the dual boot. 

What should you do? 

A. Start Windows 7 Home Premium. Add a new entry to the boot menu. 

B. Start Windows 7 Home Premium. Create a Virtual Hard Disk (VHD) file to start Windows 7 Ultimate. 

C. Reinstall Windows 7 Home Premium 32 bit as a 64-bit version. 

D. Start Windows 7 Home Premium. Create and mount a new Windows Imaging Format (WIM) file with Windows 7 Ultimate files. 

Answer:


Q112. - (Topic 4) 

A network contains computers that run Windows 7 and Windows Vista. A computer named Computer1 runs Windows 7. 

You need to ensure that only users running Windows 7 and Windows Vista can connect to Computer1 using remote desktop. 

In the System Properties window, on the Remote tab, what should you do? 

A. Click the Advanced button. Select the Allow this computer to be controlled remotely check box on Computer1. 

B. Select the Allow connections only from computers running Remote Desktop with Network Level Authentication (more secure) check box on Computer1. 

C. Select the Allow connections from computers running any version of Remote Desktop (less secure) check box on Computer1. 

D. Select Allow Remote Assistance connections to this computer check box on Computer1. 

Answer:


Q113. - (Topic 3) 

You have a computer named Computer1 that runs Windows 7. Computer1 has Remote Desktop enabled. Computer1 has a shared printer named Printer1. 

A group named HRUsers is a member of the Remote Desktop Users group. Only HRUsers has access to Printer1. A user named User1 is a member of HRUsers. 

You need to configure the computer to meet the following requirements: 

Allow User1 to print to Printer1 Prevent User1 from establishing Remote Desktop sessions to Computer1 Allow other members of HRUsers to connect to Computer1 by using Remote Desktop 

What should you do? 

A. Remove User1 from the HRUsers group. 

B. Remove HRUsers from the Remote Desktop Users group. 

C. Assign User1 the Deny log on through Remote Desktop Services user right. 

D. Assign User1 the Deny access to this computer from the network user right. Assign HRUsers the Allow log on locally user right. 

Answer:


Q114. - (Topic 5) 

You administer a computer that has Windows 7 and Internet Explorer 8 installed. A user has installed a third-party toolbar in Internet Explorer 8. 

You need to permanently remove the toolbar. 

What should you do? 

A. From Programs and Features in the Control Panel, uninstall the toolbar. 

B. From an elevated command prompt, run °/osystemdrive°/o\Program Files\Internet Explorer\iecleanup.exe. 

C. From Internet Explorer, launch Manage Add-ons and disable the toolbar. 

D. Start Internet Explorer in an InPrivate Browsing session. 

Answer:


Q115. - (Topic 3) 

You have a computer that runs Windows 7. 

You enable Advanced Audit Policy Configuration in the Local Computer Policy and discover that the policy is not applied. 

You need to ensure that Advanced Audit Policy Configuration is applied on the computer. 

What should you do? 

A. Restart the computer. 

B. Run Gpupdate /force. 

C. Enable the Security Settings policy option. 

D. Run Secedit /refreshpolicy machine_policy. 

Answer:


Q116. - (Topic 2) 

You have a customized image of Windows 7 Professional. 

You mount the image and modify the contents of the image. 

You need to restore the image to its original state. 

Which tool should you use? 

A. Dism.exe 

B. Ocsetup.exe 

C. Pkgmgr.exe 

D. Sysprep.exe 

Answer:

Explanation: 

Dism Deployment Image Servicing and Management (DISM) is a command-line tool used to service Windows images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system. Windows 7 introduces the DISM command-line tool. You can use DISM to service a Windows image or to prepare a Windows PE image. DISM replaces Package Manager (Pkgmgr.exe), PEimg, and Intlcfg in Windows Vista, and includes new features to improve the experience for offline servicing. You can use DISM to perform the following actions: 

* Prepare a Windows PE image. 

* Enable or disable Windows features within an image. 

* Upgrade a Windows image to a different edition. 

* Add, remove, and enumerate packages. 

* Add, remove, and enumerate drivers. 

* Apply changes based on the offline servicing section of an unattended answer file. 

* Configure international settings. 

* Implement powerful logging features. 

* Service operating systems such as Windows Vista with SP1 and Windows Server 2008. 

* Service a 32-bit image from a 64-bit host and service a 64-bit image from a 32-bit host. 

* Service all platforms (32-bit, 64-bit, and Itanium). 

* Use existing Package Manager scripts. 

DISM Command-Line Options 

To service a Windows image offline, you must apply or mount it. WIM images can be mounted using the WIM commands within DISM, or applied and then recaptured using ImageX. You can also use the WIM commands to list the indexes or verify the architecture for the image you are mounting. After you update the image, you must dismount it and then either commit or discard the changes you have made. 

NOT Sysprep 

Sysprep is a tool designed for corporate system administrators, OEMs, and others who need to deploy the Windows XP operating system on multiple computers. After performing the initial setup steps on a single system, you can run Sysprep to prepare the sample computer for cloning. Sysprep prepares the image for capture by cleaning up various user-specific and omputerspecific settings, as well as log files. The reference installation now is complete and ready to be imaged. 


Q117. - (Topic 5) 

You administer computers that have Windows 7 and Internet Explorer 8 installed. 

You want to log on to one of the computers and access a web-based management application that runs on a server by using Internet Explorer. 

You need to ensure that any data about your browser session is not saved on the computer. 

What should you do? 

A. From the Safety drop-down menu, open an InPrivate Browsing session. 

B. Start the Microsoft Network Access Protection service. 

C. From the Local Group Policy, enable the InPrivate Filtering Threshold setting. 

D. From Internet Options, on the Advanced tab, clear Enable DOM Storage. 

Answer:


Q118. - (Topic 2) 

You have a computer that runs windows 7. 

The windows experience index displays the subscores in the following. 

Component Subscore 

Processor 6.9 

Memory (RAM) 5.3 

Graphics 3.2 

Gaming graphics 4.1 

Primary hard disk 4.5 

You need to increase the Windows Experience Index base score. 

What should you do? 

A. Add more RAM. 

B. Add a second hard disk. 

C. Upgrade the video adapter. 

D. Upgrade to a faster processor. 

Answer:


Q119. - (Topic 3) 

You have two computers named Computer1 and Computer2 that run Windows 7. Computer2 is configured for remote management. 

From Computer1, you need to remotely execute a third-party command line tool named disk.exe on Computer2. 

Which command should you run? 

A. Start disk.exe /d \\computer2 

B. Tscon disk.exe /DEST:computer2 

C. Winrm e disk.exe Cr:computer2 

D. Winrs r:computer2 disk.exe 

Answer:

Explanation: 

WinrsYou can use WinRS to execute command-line utilities or scripts on a remote computer. To use WinRS, open a command prompt and prefix the command that you want to run on the remote computer with the WinRS –r: RemoteComputerName command. For example, to execute the Ipconfig command on a computer named Aberdeen, issue the command: WinRS –r:Aberdeen ipconfig. 

The Windows Remote Management service allows you to execute commands on a remote computer, either from the command prompt using WinRS or from Windows PowerShell. Before you can use WinRS or Windows PowerShell for remote management tasks, it is necessary to configure the target computer using the WinRM command. To configure the target computer, you must run the command WinRM quickconfig from an elevated command prompt. 


Q120. - (Topic 2) 

You have a computer that runs Windows Vista (x86). 

You need to perform a clean installation of Windows 7 (64-bit). 

What should you do? 

A. From the Windows 7 installation media, run Rollback.exe. 

B. From the Windows 7 installation media, run Migsetup.exe. 

C. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select the Upgrade option. 

D. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select the Custom (advanced) option. 

Answer:

Explanation: 

When you are performing a clean installation, you should select Custom (Advanced). Almost all installations ofm Windows 7 that you will perform will be of the Custom (Advanced) type rather than upgrades. You can initiate upgrade installations only from within Windows Vista or Windows 7.NOT Rollback, Migsetup, or Upgrade:Specified clean installation not migration, update or rollback.