It is more faster and easier to pass the Microsoft 70 680 pdf exam by using Free Microsoft TS:Windows 7,Configuring questuins and answers. Immediate access to the Replace 70 680 exam Exam and find the same core area 70 680 practice test questions with professionally verified answers, then PASS your exam with a high score now.

Q121. - (Topic 2) 

You have two computers that run Windows 7. Both computers are connected to a network and have IP addresses within the 172.16.10.0/24 subnet. 

You need to ensure that both computers can join a HomeGroup. 

What should you do? 

A. Enable network discovery. 

B. Set the network location to Home network. 

C. Configure Windows Firewall to allow the Netlogon service. 

D. Change the IP addresses to be within the 192.168.1.0/24 subnet. 

Answer:

Explanation: 

Windows Firewall does not allow you to create firewall rules for specific network locations on the basis of port address. Windows Firewall does not allow you to create rules that differentiate between the home and work network locations. You can only create rules that differentiate on the basis of home and work or public network locations.HomeGroup ConnectionsThis option decides how authentication works for connections to HomeGroup resources. If all computers in the HomeGroup have the same user name and passwords configured, you can set this option to allow Windows to manage HomeGroup connections. If different user accounts and passwords are present, you should configure the option to use user accounts and passwords to connect to other computers. This option is available only in the Home/Work network profile. 


Q122. - (Topic 5) 

You have a computer that runs a 32-bit version of Windows 7 Home Premium. The computer has a single partition on a single hard disk drive. 

You want to test a 64-bit version of Windows 7 Ultimate. You configure the computer for a dual boot with previously installed Windows 7 Home Premium. 

You need to configure the computer to support the dual boot. 

What should you do? 

A. Reinstall Windows 7 Home Premium 32 bit as a 64-bit version. 

B. Start Windows 7 Home Premium. Create and mount a new Windows Imaging Format (WIM) file with Windows 7 Ultimate files. 

C. Shrink the existing partition and create a new partition to start Windows 7 Ultimate. 

D. Install Virtual PC into Windows 7 Home Premium. 

Answer:

Explanation: Easily Shrink a Volume on a Windows 7 Disk The Windows 7 Disk Management tool provides a simple interface for managing partitions and volumes. There is an easy way to shrink a volume to free up space so you can create a new partition on your disk. 


Q123. - (Topic 4) 

A Remote Assistance session is established with a user's computer that runs Windows 7 Enterprise. 

You need to verify that a local file is encrypted with the Encrypting File System (EFS). 

What should you do to accomplish this goal? 

A. the netsh command 

B. the folder Properties window 

C. Device Manager 

D. share permissions 

E. the Services management console 

F. the Group Policy management console 

G. the icacls command 

H. the User Account Control Settings Control Panel window 

I. Local Users and Groups 

Answer:

Explanation: Right-click the file or folder Select Properties Click the Advanced button under the Attributes section If Check the box next to "Encrypt contents to secure data" is checked, then the file is encrypted using EFS. 


Q124. HOTSPOT - (Topic 6) 

A company has Windows 7 computers that that use Internet Explorer 10 with InPrivate Browsing and InPrivate Filtering. 

In the table below, identify the functionality of each InPrivate mode. (Make only one selection in each column. This question is worth two points. ) 

Answer: 


Q125. - (Topic 5) 

Your company has an Active Directory domain and several branch locations. All sales employees use portable computers that have Windows 7 Enterprise installed. 

Employees report that when they travel to different branch locations, documents that must be printed are sent to printers in their home office. 

You need to ensure that documents that must be printed are automatically sent to printers at their current locations. 

What should you do first? 

A. Publish all printers to Active Directory. 

B. From Devices and Printers, select Change my default printer when I change networks. 

C. From Devices and Printers, select the branch office printer, and then select set as default. 

D. Configure alternate IP settings. 

Answer:


Q126. - (Topic 4) 

A company has a server running Windows Server2008 R2 with Windows Deployment Services(WDS), the Microsoft Deployment Toolkit(MDT), and the Windows Automated Installation Kit(WAIK) set up. The company also has client computers running windows 7 Enterpire. You are preparing to a capture an image of a windows 7 client computer. You need to ensure that the capture iamge does not contian the device drivers from the client computer. What should you do? 

A. Run the Dism command with the /Add-Driver options 

B. Run the PEImg/Prep command 

C. Run the ImageX command with the /Mount parameter 

D. Run the Start/w ocsetup command 

E. Run the DiskPart command and the Attach command option 

F. Use Sysprep with an answer file and set the PersistAllDeviceInstalls option the answer file to False 

G. Run the Dism command with the /Mount-Wim options 

H. Use Sysprep with an answer file and set the UpdateInstalledDrivers option the answer file to Yes 

I. Run the BCDEdit /delete command 

J. Use Sysprep with an answer file and set the UpdateInstalledDrivers option the answer file to No 

K. Run the Dism command with the /Add-Package options 

L. Use Sysprep with an answer file and set the PersistAllDeviceInstalls option the answer file to True 

M. Add a boot image and create a capture image in WDS 

Answer:

Explanation: 

Persisting Plug and Play Device Drivers During generalize You can persist device drivers when you run the sysprep command with the /generalize option by specifying the PersistAllDeviceInstallssetting in the Microsoft-Windows-PnPSysprep component. During the specialize configuration pass, Plug and Play scans the computer for devices and installs device drivers for the detected devices. By default, these device drivers are removed from the system when you generalize the system. If you set PersistAllDeviceInstalls to true in an answer file, Sysprep will not remove the detected device drivers. For more information, see the Unattended WindowsSetup Reference (Unattend.chm). 

http://technet.microsoft.com/en-us/library/dd744512(WS.10).aspx 


Q127. - (Topic 5) 

You use a desktop computer that has Windows 7 Ultimate SP1. The relevant portions of the computer configuration are shown in the following exhibits: 

. The Disk Management console (Click the Exhibit button.) 

. The System Properties window (Click the Exhibit button.) 

. The System protection for Local Disk C window (Click the Exhibit button.) 

You share your Documents library over a network. 

You discover that one of the files in the library was replaced with a previous version and 

then renamed. 

You need to restore the most recent version of the original file. 

What should you do? 

A. Delete restore points. 

B. Create a restore point. 

C. Perform a system restore. 

D. Search for the file in the Recycle Bin. 

E. Increase disk space used for system protection. 

F. Copy the file from a previous version of a folder. 

G. Set restore settings to only restore previous versions of files. 

H. Run the cipher /x command from the elevated command prompt, 

I. Run the vssadmin list volumes command from the elevated command prompt. 

J. Run the vssadmin list shadows command from the elevated command prompt, 

K. Run the compact /U <file_name> command from the elevated command prompt. 

Answer:

Explanation: Note: To restore a previous version of a file or folder that's included in a library, right-click the file or folder in the location where it's saved, rather than in the library. For example, to restore a previous version of a picture that's included in the Pictures library but is stored in the My Pictures folder, right-click the My Pictures folder, and then click Restore previous versions. 


Q128. - (Topic 1) 

You have a computer that runs Windows 7. 

The IPv6 address of the computer is configured automatically. 

You need to identify the IPV6 address of the computer. 

What should you do? 

A. At the command prompt, run Netstat. 

B. At the command prompt run Net config. 

C. From the network connection status, click Details. 

D. From network connection properties, select Internet Protocol Version 6 (TCP/IPv6) and click Properties. 

Answer:

Explanation: You can view a list of all the connection interfaces (wired and wireless) on a computer by opening Network And Sharing Center and clicking Change Adapter Settings. You can right-click any network connection and select Status. If you click Details on the Local Area Connection Status dialog box, you access the Network Connection Details information box. You can configure wireless connection behavior by clicking Change Adapter Settings in Network And Sharing Center, right-clicking your wireless adapter, and clicking Status. Clicking Details on the Status dialog box displays the adapter configuration. 


Q129. - (Topic 3) 

A standard user named User1 has a computer that runs Windows 7. 

You need to ensure that User1 can run Windows Easy Transfer. 

What should you do? 

A. Disable User Account Control (UAC). 

B. Add User1 to the Administrators group. 

C. Configure User1 to have a complex password. 

D. Copy the support folder from the Windows 7 installation media to the local hard disk drive. 

Answer:

Explanation: 

Windows Easy Transfer Migration After you have set up Windows Easy Transfer on the source computer, you are ready to perform migration. If you want to migrate only a single user account, you can log on with that account to perform the transfer. If you want to migrate all accounts on the computer, you need to log on with a user account that has Local administrator privileges. 

To do this, start Windows Easy Transfer, select the transfer method, and then, on the Which Computer Are You Using Now? page, select This Is My Old Computer. If you are using the External Hard Disk or USB storage device method, Windows Easy Transfer will then perform a migration check and provide an estimate of the size of the data you can transfer to the new computer on the source computer. If you are using the Network or Easy Transfer Cable method, you will select items for migration on the destination computer. 

NOT User Account Control (UAC) UAC is a security feature of Windows 7 that informs you when the action that you want to undertake requires an elevation of privileges. If you logged on with a user account that was a member of the local administrators group in previous versions of Microsoft Windows, such as Windows XP, you automatically had administrator-level access at all times. This, by itself, was not a problem because recommended good practice was that people logged on with accounts that were members of the local administrator group only when they needed to do something related to administration. The problem with this is that people tended to use their administrator account as their normal user account. It was convenient for them because they did not have to log off and log on again each time they wanted to do something related to systems administration. Unfortunately, this behavior presented a security problem because any program run by a user logged on with an administrative account runs with the rights and privileges of that user. UAC resolves this problem by allowing a user that is a member of the local Administrators group to run as a standard user most of the time and to briefly elevate their privileges so that they are running as administrators when they attempt to carry out specific administration-related tasks. 


Q130. - (Topic 6) 

You have a Windows 7 Professional computer that is a member of an Active Directory domain. The domain group policy redirects documents to save to the network-attached storage device mapped to the F: drive. 

You want to implement a disaster recovery solution that restores only the local drives to a previous state. You attach an external drive to the computer locally and assign it to the X: drive. 

You need to configure the solution to perform the backup on a weekly basis. 

What should you do? 

A. Configure a Windows Backup to include a system image file to back up to the X: drive. Run the X: drive weekly. 

B. Create a batch file that runs the command "ntbackup backup systemstate /J "SystemStateBackup" /F "X: \Backup. bkf". Configure a Scheduled Task to run the command weekly. 

C. Create a batch file that runs the command "wbadmin start backup -backuptarget:x: -included: -quiet". Configure a Scheduled Task to run the command weekly. 

D. Configure a Windows Backup to include a system image file and select the F: drive to back up to the X: drive. Run the F: drive weekly. 

Answer: