Approved of 70 680 pdf test materials and preparation exams for Microsoft certification for candidates, Real Success Guaranteed with Updated 70 680 pdf pdf dumps vce Materials. 100% PASS TS:Windows 7,Configuring exam Today!
Q286. DRAG DROP - (Topic 4)
A company has client computers that run windows vista.
You need to install Windows 7 on a client computer in a dual-boot configuration with the existing Windows Vista installation, without reducing the size of the partition that contains Windows Vista.
Which actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Q287. - (Topic 3)
You have two computers named Computer1 and Computer2 that run Windows 7.
You use Remote Desktop to connect from Computer1 to Computer2.
You need to prevent the desktop background of Computer2 from being displayed when you use Remote Desktop to connect to Computer2.
What should you do on Computer1?
A. From the Personalization options, change the theme.
B. From the System properties, modify the Remote settings.
C. From the Remote Desktop Connection options, modify the Performance setting.
D. From the Remote Desktop Connection options, modify the Display configuration settings.
Answer: C
Explanation:
Configuring the Desktop ExperienceYou can configure the connection speed and fine-tune the desktop environment for optimal performance by using the settings located on the Experience tab of the Remote Desktop Connection tool. Most of these settings relate to the graphical nature of the desktop. Because the processing for graphics happens on the server and must be transmitted to the desktop over the network connection, you can increase performance by allowing only the minimal settings that are necessary for your users. When you choose a connection speed, the check boxes are automatically selected to indicate the recommended settings for the richest visual experience possible at that speed.ExperienceConfigure the connection speed and adjust the desktop environment for optimal performance.Desktop background Allows user to choose a custom background or wallpaper for their desktop. Because these can be very graphicintensive, disable this setting unless it is necessary for your users.
Q288. - (Topic 6)
You have a computer that runs Windows 7 Enterprise. The operating system is installed on drive C.
You have customized the Windows environment and prepared it to generate deployment source media. You attach a USB flash drive as drive D to the computer.
You need to create a Windows image file that has the operating system partition.
What should you do?
A. Run imagex.exe /capture d: c:\image.wim.
B. Run imagex.exe /capture c: d:\image.wim.
C. From Backup and Restore, create a system image and save it to drive D.
D. Run xcopy.exe c: d: /p /c.
Answer: C
Q289. - (Topic 2)
You have a computer that runs Windows Vista.
You install Windows 7 on a new partition on the computer.
You need to ensure that the computer always starts Windows Vista by default.
What should you do?
A. Run Bcdedit.exe and specify the /default parameter.
B. Run Bcdedit.exe and specify the /bootems parameter.
C. Create a boot.ini file in the root of the Windows 7 partition.
D. Create a boot.ini file in the root of the Windows Vista partition.
Answer: A
Explanation:
The Bcdedit.exe utility allows you to manage boot configuration./default - Sets the default entry that the boot manager willl use./bootems - Enable or disables Emergency Management Services for a boot application.NOT boot.ini:Windows (specifically Ntldr) uses
Q290. - (Topic 3)
You have a computer that runs Windows 7.
You need to configure system image backups to meet the following requirements:
. Automatically create a system image every day without user intervention
. Retain multiple copies of the system image
Which type of backup destination should you use?
A. External hard disk drive
B. Network location
C. USB flash drive
D. Writeable DVD
Answer: A
Explanation: Explanation/Reference: Backup And Restore in Windows 7 supports backing up data files to CD-ROM, DVD-ROM, hard disk (including VHD files), or a network location. You can use Backup And Restore to write a System Image backup to an internal hard disk drive, an external hard disk drive (if formatted with the NTFS file system) and a network location. You cannot use Backup And Restore to write a System Image backup to a USB flash drive, a writable DVD, or a tape drive. You need to schedule client computers that store important data for automatic backup. After you first configure automatic file backup using the Backup And Restore console, Windows 7 regularly backs up your files. The first time a backup is performed, a full backup is done, including all important user documents. Subsequent backups are incremental, backing up only changed files. Older backups are discarded if the disk begins to run out of space.Scheduling Backups with the Backup And Restore Console Windows 7 Backup uses shadow copies to take a snapshot of your files, allowing the backup to completely back up files even if they are open. Backups are configured and scheduled by using the Backup And Restore console under System And Security in Control Panel. You can select the following types of backup destination: An external hard drive External hard drives are more expensive to purchase than internal hard drives, although you need to balance this against the cost of fitting the internal drive. They can be removed and stored in a secure location. However, they are typically slower than internal hard drives and tend to be less reliable, mainly because they are by default formatted using FAT rather than NTFS. You cannot use an external hard drive for a System Image backup unless you convert its filing system to NTFS. Because it is easily removable, it is more likely that an external hard drive will be missing when a scheduled backup is required.
Network locationIf your computer is short of disk space, you can back it up to a network location on another computer or network storage. Note that this is not the same as the situation in a production environment, where users' Documents libraries are stored on a file server and an administrator backs up the file server. You can save your backups on a network location only on computers running Windows 7 Professional, Windows 7 Ultimate, and Windows 7 Enterprise, and you need to provide credentials so that Windows Backup can access the network. Bear in mind that you can save your backups on a network location only on computers running Windows 7 Professional, Windows 7 Ultimate, and Windows 7 Enterprise.USB flash drivesFlash drive memory is considerably less expensive and flash drive devices support much more memory than they did three or even two years ago. Nevertheless, they typically support a lot less memory than hard drives and quickly fill up if you needed to keep copies of older backups. You cannot save System Image backups to flash memory. A flash drive must be able to hold more than 1 GB if you want to save a backup on it. Flash drives can be stored offsite and are small and easy to carry. They are also easy to lose.
Q291. - (Topic 5)
You are evaluating the purchase a netbook computer that has the following hardware:
1.6-gigahertz (GHz) 32-bit processor
1024-MB RAM
1 video card that uses shared memory
. 4-G8 solid state drive
You need to ensure that you can install Windows 7 Enterprise on the netbook computer. Which hardware component should you change or add?
A. storage device
B. video card
C. processor
D. ram
Answer: A
Q292. - (Topic 1)
You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive is connected to a RAID controller.
During the installation, you discover that the Windows 7 installation media does not include the files required to install the RAID controller.
You need ensure that you can install Windows 7 on the hard disk drive.
What should you do?
A. Insert the Windows installation media and press F8 during the computer's power-on self test (POST).
B. Insert the Windows installation media and press F6 during the computer's power-on self test (POST).
C. Start the computer from the Windows installation media. From the Install Windows dialog box, click Load Driver.
D. Start the computer from the Windows installation media. From the Install Windows dialog box, click Drive options (advanced).
Answer: C
Explanation:
If your computer has special disk drive hardware, such as a redundant array of independent disks (RAID) array, it may be necessary to use the Load Driver option. It is necessary to use this option only if the disk that you want to install Windows on is not shown as a possible install location. If your disk is shown as an available option, Windows 7 has already loaded the appropriate drivers. Once you select the location where you want to install Windows 7, the Windows 7 installation process begins.
Q293. - (Topic 5)
You have a computer that runs a 32-bit version of Windows 7 Home Premium. The computer has a single partition on a single hard disk drive.
You want to test a 64-bit version of Windows 7 Ultimate. You configure the computer for a dual boot with previously installed Windows 7 Home Premium.
You need to configure the computer to support the dual boot.
What should you do?
A. Start Windows 7 Home Premium. Create a Virtual Hard Disk (VHD) file to start Windows 7 Ultimate.
B. Start Windows 7 Home Premium. Add a new entry to the boot menu.
C. Attach Windows 7 Ultimate media as an ISO image into Windows 7 Home Premium.
D. Install Virtual PC into Windows 7 Home Premium.
Answer: A
Q294. - (Topic 3)
You need to configure a computer to encrypt all inbound connections by using IPSec.
What should you do?
A. From Network and Sharing Center, click Connect to a network.
B. From Network and Sharing Center, click Set up a new connection or network.
C. From Windows Firewall with Advanced Security, click Inbound Rules and then click New Rule.
D. From Windows Firewall with Advanced Security, click Connection Security Rules and then click New Rule.
Answer: D
Explanation:
Connection Security Rules Connection security rules are a special type of rule that deal with authenticated and encrypted traffic. You can use connection security rules to manage how communication occurs between different hosts on the network. You use the New Connection Security Rule Wizard, to create connection security rules. Connections can be authenticated using the Kerberos V5 protocol requiring a domain computer and user account or a domain computer account. If you select advanced properties, connections can be authenticated using NTLMv2, computer certificates from a particular certificate authority (CA) or using a pre-shared key.Connection Security Rules and IPSec policies The relationship between connection security rules and IPSec policies is similar to the relationship between AppLocker and Software Restriction Policies. Both sets of rules do similar things, but the ones that you use depend on the operating systems used by the client computers in your organization. All editions of Windows 7 and Windows Vista support connection security rules, but Windows XP does not.
Q295. - (Topic 3)
You have a computer that runs Windows 7.
You have an application control policy on the computer.
You discover that the policy is not enforced on the computer.
You open the Services snap-in as shown in the exhibit. (Click the Exhibit button.)
You need to enforce the application control policy on the computer.
What should you do?
A. Set the Application Identity service Startup Type to Automatic and start the service.
B. Set the Application Information service Startup Type to Automatic and start the service.
C. Set the Application Management service Startup Type to Automatic and start the service.
D. Set the Application Experience service Startup Type to Automatic and start the service.
Answer: A
Explanation:
Application Identity service AppLocker relies upon the Application Identity Service being active. When you install Windows 7, the startup type of this service is set to Manual. When testing AppLocker, you should keep the startup type as Manual in case you configure rules incorrectly. In that event, you can just reboot the computer and the AppLocker rules will no longer be in effect. Only when you are sure that your policies are applied correctly should you set the startup type of the Application Identity Service to Automatic. You should take great care in testing AppLocker rules because it is possible to lock down a computer running Windows 7 to such an extent that the computer becomes unusable. AppLocker policies are sometimes called application control policies
Q296. - (Topic 4)
Your company office network includes a file server that has Windows Server 2008 R2 installed and client computers that have Windows 7 Enterprise installed. The computers are members of an Active Directory domain. The file server has the BrachCache features installed.
All sales user in the office must download a daily updated 5-GB file that is stored on a file server located in a remote office.
You configure the client computers to run BranchCache in Distributed Host mode. You discover that all users still access the file directly from the file server.
You need to reduce the utilization of a WAN link between the offices because of downloading the file to the client computers.
What should you do?
A. Run the Netsh branchcache set service mode=HOSTEDSERVER client authentication=NONE command
B. Configure firewall exception rules for multicast traffic, inbound and outbound traffic for local UDP port 3702, and inbound and outbound traffic for local TCP port 80.
C. Create a Group Policy that sets Hash Publication for BranchCache as disabled.
D. Run the netsh branchcache set service mode=DISTRIBUTED command.
E. Create a Group Policy object and configure the Set percentage of disk space used for client computer cache option.
F. Check permisions.
G. Run the netsh branchcache set service mode=HOSTEDCLIENT command.
H. Create a Group Policy object and enable the Set BranchCache Hosted Cache mode policy.
I. Configure firewall exception rules for inbound and outbound traffic for local TCP port 80 and for inbound and outbound traffic for local TCP port 8443.
Answer: E
Explanation:
Original wording: You configure the client computers to run BranchCache in 'Distributed Host Mode'. Changed to 'Distributed Cache mode".
Q297. - (Topic 3)
You have a portable computer that runs Windows 7. The computer is joined to a domain. Multiple users log on to the computer.
You need to prevent the computer from displaying the username of the last user who logged on.
What should you do?
A. From Control Panel, modify the User Profiles settings.
B. From Control Panel, modify the Personalization settings.
C. From the local computer policy, add a policy template.
D. From the local computer policy, modify the local security policy.
Answer: D
Explanation:
How to Prevent the Last Logged-On User Name from Being Displayed
1. Click Start and type secpol.msc in the search box.
2. Press Enter.
3. Within the Local Security Policy, navigate to Security Settings | Local Policies | Security Options.
4. In the details pane, scroll through the options and locate Interactive logon: Do not display last user name.
5. Double click this security option and click Enabled.
6. Click OK.
Q298. - (Topic 5)
You install the Windows Automated Installation Kit (WAIK) for Windows 7 on a computer that runs Windows 7.
You want to deploy a Windows image (WIM) file to other computers in the domain. You need to capture the operating system, computer configuration, and applications installed on the computer to a WIM file.
What should you do before you capture the image?
A. Run Oscdimg.exe.
B. Run Sysprep.exe.
C. Open a command prompt that has elevated privileges.
D. Run Defrag.exe.
Answer: B
Explanation: http://support.microsoft.com/kb/302577 http://technet.microsoft.com/en-gb/library/gg712328.aspx
Microsoft Official Academic Course (handbook) by Wiley (Lesson 3 page 66-67, 71)
Q299. - (Topic 4)
You have a computer that runs Windows 7. The computer is configured to automatically download and install updates.
You install Microsoft Office 2007.
You need to ensure that service packs for Office are automatically installed.
What should you do?
A. From Windows Update, select Restore hidden updates.
B. From Windows Update, select Get updates for other Microsoft products.
C. Create a folder named Updates in C:\Program Files\Microsoft Office. Install the Office Update Inventory Tool into the Updates folder.
D. Download and install the Office 2007 administrative template and disable the Block updates from the Office Update Site from applying policy.
Answer: B
Explanation:
Use Windows Update to Check for Updates to other Microsoft Products By default, Windows Update can download and install updates for Windows 7 and features that are part of the operating system (such as Internet Explorer). You can also merge the functionality of Microsoft Update—a service for managing updates to Microsoft Office and several other Microsoft products—into Windows Update so that you no longer need to visit Office Online to get updates.If you do not already have Windows Update integrated with Microsoft Update, you will see the message "Get updates for other Microsoft products" on the Windows Update home page. To enable checking for other products, click the Find Out More option shown beside this message. This will take you to the Microsoft Update site for some quick installation steps. You only need to do this once. Thereafter, the Windows Update home page will indicate that you receive updates "For Windows and other products from Microsoft Update."
Q300. - (Topic 2)
Which of the following Windows 7 utilities was used to create the output in the above figure?
Not the real exhibit (exhibit):
German Output (exhibit):
A. MemManager.exe
B. SysPrep.exe
C. Cipher.exe
D. Performance Monitor
Answer: C