Our pass rate is high to 98.9% and the similarity percentage between our 70-735 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Microsoft 70-735 exam in just one try? I am currently studying for the Microsoft 70-735 exam. Latest Microsoft 70-735 Test exam practice questions and answers, Try Microsoft 70-735 Brain Dumps First.
Q19. HOTSPOT
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Q20. Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You are building a new image of Windows 10.
You have a network share that contains the driver files. Each driver is comprised of an INF file and several DLL files.
You need to add the drivers to computers that are installed by using the Windows 10 image. You must achieve the goal without adding the drivers to the image.
What should you do?
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: F
Q21. You make changes to applications, languages, and updates in the image. After the changes, the size of the image increases to 500 MB.
You need to modify the deployment script to ensure that the recovery partition has the required amount of free space. The solution must minimize the space of the recovery partition.
To which Size Should you set the recovery partition?
A. 550 MB
B. 820 MB
C. 1024 MB
D. 1524 MB
Answer: A
Q22. answer file contains the following information.
You need to verify whether the support information is displayed in Windows. What should you do?
A. From the Start menu, open Msconfig.
B. From the Settings app, click System, and then click About.
C. From the Start menu, open Msinfo32.
D. From Control Panel, open System.
Answer: B
Q23. Note: This question is part of a series of questions that use the same or similar answer
choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an image of Windows 10 for a new desktop computer model. The computer uses specific out-of-box device drivers stored in the INF format.
You need to update the drivers by using an answer file. Which parameter should you specify when you run dism.exe?
A. /Add-Capability
B. /Add-Driver
C. /Add-Package
D. /Add-ProvisionedAppxPackage
E. /Apply-CustomDataImage
F. /Apply-Image
G. /Apply-Unattend
H. /Export-Image
Answer: B
Q24. Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You create the working directories for the customization of a Windows Preinstallation Environment (Windows PE) image.
You need to add scripting support to windows PE. What should you do first?
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: B
Q25. Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a custom image of Windows 10. You need to deploy the image to a computer.
Which parameter should you specify when you run dism.exe?
A. /Add-Capability
B. /Add-Driver
C. /Add-Package
D. /Add-ProvisionedAppxPackage
E. /Apply-CustomDataImage
F. /Apply-Image
G. /Apply-Unattend
H. /Export-Image
Answer: G
Q26. Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details
provided in a question apply only to that question. You install Windows 10 on several devices.
You need to add a trusted root certification to the devices. You must achieve the goal with out reinstalling Windows 10.
What should you do?
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: H
Q27. HOTSPOT
For each of the following statements, select Yes the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Q28. You plan to deploy a new image of Windows 10.
You mount the image and preinstalll an app from the Windows Store. You need to manually test whether the app runs as expected.
What should you do first?
A. Start the computer, press SHIFT+F10, and then run sfc.exe.
B. Remove the license file from the package files, and then start the computer in audit mode.
C. Start the computer in audit mode, and then create a new user profile.
D. Start the computer, and then complete the Out-of-Box-Experience (OOBE).
Answer: D
Q29. You have an image of Windows 10.
You plan to deploy the image to a new computer.
You run sysprep.exe /generalize /oobe /shutdown, and then you capture the image. You deploy the image to the computer.
You add an application and a driver to the online image. You need to prepare the computer for the end user. Which command should you run?
A. sysprep.exe /oobe
B. sysprep.exe /generalize /audit
C. dism.exe /Apply-Image
D. imagex.exe /capture
Answer: A
Q30. Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You are building a new image of Windows 10.
You copy the installation media for Windows 10 to Computer1. You need to add drivers to the Windows 10 image.
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: B
Q31. Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an image of Windows 10 that you plan to deploy to a new computer. You need to add the latest cumulative updates to the image.
Which parameter should you specify when you run dism.exe?
A. /Add-Capability
B. /Add-Driver
C. /Add-Package
D. /Add-ProvisionedAppxPackage
E. /Apply-CustomDataImage
F. /Apply-Image
G. /Apply-Unattend
H. /Export-Image
Answer: C
Q32. This question requires that you evaluate the underlined text to determine if it is correct.
To provide the default product key for OEM activation, you create an answer file by using Windows System Image Manager (Windows SIM), and you add the Microsoft-Windows- Shell-Setup component and the ProductKey component to the generalize pass.
Review the underlined text. It it makes the statement correct, select "No change is needed." If the statement is incorrect, select the answer choice that makes the statement correct.
A. No change is needed
B. auditSystem pass
C. specialize pass
D. windowsPE pass
Answer: C
Q33. Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You create the working directories for the customization of a Windows Preinstallation Environment (Windows PE) image.
You need to modify the regional setting used in windows PE. What should you do first?
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: D
Q34. You deploy an image of Windows 10.
From audit mode, you install several applications for a customer, and then you run sysprep.exe /oobe /quit.
You need to identify whether any errors occurred when you ran sysprep.exe. Which folder contains the log files?
A. %WINDIR%\Logs
B. %WlNDIR%\System32\LogFiles
C. %WINDIR%\Panther\
D. %WINDIR%\System32\Sysprep\Panther
Answer: D
Explanation: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/windows-setup-log-files-and-event-logs
Q35. Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an image of Windows 10 that you plan to deploy to a new computer. You need to add the latest cumulative updates to the image.
Which parameter should you specify when you run dism.exe?
A. /Add-Capability
B. /Add-Driver
C. /Add-Package
D. /Add-ProvisionedAppxPackage
E. /Apply-CustomDataImage
F. /Apply-Image
G. /Apply-Unattend
H. /Export-Image
Answer: C
Q36. Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You are building a new image of windows 10.
You need to specify how the hard disk will be partitioned during the Windows 10 installation.
What should you do?
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: A