Act now and download your Microsoft exam 70 743 test today! Do not waste time for the worthless Microsoft exam 70 743 tutorials. Download Improve Microsoft Upgrading Your Skills to MCSA: Windows Server 2021 exam with real questions and answers and begin to learn Microsoft exam 70 743 with a classic professional.
Q1. You have an application named App1 App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment You need to ensure that the traffic is distributed evenly among the virtual machines that host App1 What should you include in the environment?
A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
B. Network Controller and Windows Server Software Load Balancing (SLB) nodes
C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
D. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
Answer: D
Q2. Your network contains an Active Directory domain named contoso com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?
A. RunNew-SRPartnershipand specify the -RephcationModeparameter.
B. install the Failover Clustering feature and create a new cluster resource group.
C. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).
D. RunSet-DfsrServiceConfigurationand specify the -RPCPortparameter
Answer: A
Q3. Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand-alone Hyper-V host named Server1 at a secondary location
A virtual machine named VM1 runs on Cluster1
You configure a Hyper-V Replica of VM1 to Server1 You need to perform a Test Fai lover of VM1. Which tool should you use?
A. the clussvc.exe command
B. the cluster.exe command
C. the Computer Management console
D. the configurehyperv.exe command
E. the Disk Management console
F. the Failover Cluster Manager console
G. the Hyper-V Manager console
H. the Server Manager Desktop app
Answer: G
Q4. You have a failover cluster named Cluster!
A virtual machine named VM1 is a highly available virtual machine that runs on Cluster1 A custom application named App1 runs on VM1.
You need to configure monitoring of VM1. If App1 adds an error entry to the Application event log, VM1 should be automatically rebooted and moved to another cluster node
Which tool should you use?
A. Hyper-V Manager
B. Failover Cluster Manager
C. Server Manager
D. Resource Monitor
Answer: B
Q5. Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 contains a virtual machine named VM1.
You need to ensure that you can use nested virtualization on VM1. What should you run on Server1?
A. the Mount-VHD cmdlet
B. the Diskpart command
C. the Set-VHD cmdlet
D. the Set-VM cmdlet
E. the Set-VMHost cmdlet
F. the Set-VMProcessor cmdlet
G. the Install-WindowsFeature cmdlet
H. the Optimize-VHD cmdlet
Answer: F
Q6. You have a failover cluster named Cluster!
A virtual machine named VM1 is a highly available virtual machine that runs on Cluster1 A custom application named App1 runs on VM1.
You need to configure monitoring of VM1. If App1 adds an error entry to the Application event log, VM1 should be automatically rebooted and moved to another cluster node
Which tool should you use?
A. Hyper-V Manager
B. Failover Cluster Manager
C. Server Manager
D. Resource Monitor
Answer: B
Q7. You have a server named Server1 that runs Windows Server 2021. Server! is a Hyper-V host that hosts a virtual machine named VM1. Server1 has three network adapter cards That connect to a virtual switch named vSwitch1.
You configure NIC Teaming on VM1 as shown in the exhibit.
You need to ensure that VM1 will retain access to the network if a physical adapter card fails on Server1. What should you do?
A. From Hyper-V Manager on Server1, modify the settings of VM1.
B. From Windows PowerShell on Server1, run theSet-VmSwitchcmdlet.
C. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.
D. From the properties of the NIC team on VM1. change the load balancing of the NIC team.
Answer: A
Q8. Your network contains an Active Directory domain named contoso com. The domain contains a member server named Server1 that runs Windows Server 2021.
You install IP Address Management (IPAM) on Server! You select the automatic provisioning method, and then you specify a prefix of IPAM!
You need to configure the environment for automatic IPAM provisioning.
Which cmdlet should you run? To answer, select the appropriate options in the answer area.
Answer:
Q9. Your network contains an Active Directory domain named contoso com. The domain contains a DNS server named Server1
You enable Response Rate Limiting on Server1.
You need to prevent Response Rate Limiting from applying to hosts that reside on the network of 10.0.0.0/24. Which cmdlets should you run? To answer, select the appropriate options in the answer area
Answer:
Q10. In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2021 All domain controllers run Windows Server 2012 R2
Contoso com has the following configuration
You plan to deploy an Active Directory Federation Services (AD FS) farm on Served and to configure device registration You need to configure Active Directory to support the planned deployment.
Solution You upgrade a domain controller to Windows Server 2021 Does this meet the goal?
A. Yes
B. No
Answer: B
Q11. In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1 must resolve queries from all other DNS clients
Solution From Windows PowerShell on Setver1, you run the Add-DnsServerTrustAnchor cmdtel Does this meet the goal?
A. Yes
B. No
Answer: A
Q12. You have a server named Server1 that runs Windows Server 2021 You install the Docker daemon on Server! You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?
A. Run theNew-NetFirewallRulecmdlet
B. Run theSet-ServiceWindows PowerShell cmdlet.
C. Edit the daemon.json file.
D. Edit the configuration json file
Answer: C
Q13. You have a Nano Server named Nano1.
Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1?
A. Find-NanoServerPackage
B. Get-Package
C. Find-Package
D. Get-WindowsOptionalFeature
Answer: B
Q14. Your network contains an Active Directory domain named contoso com. The domain contains a DNS server named Server1
Server1 configured to use a forwarder named server2.contoso.com that has an IP address of 10.0.0.10. You need to prevent Server1 from using root hints if the forwarder is unavailable.
What command should you run? To answer, select the appropriate options in the answer area
Answer:
Q15. Your network contains an Active Directory domain named contoso com The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed Server2 has Microsoft System Center 2021 Virtual Machine Manager (VMM) installed.
You need to integrate IPAM and VMM
Which types of objects should you create on each server? To answer, drag the appropriate object types to the correct servers Each object type may be used once, more than once, or not at all You may need to drag the split bar between panes or scroll to view content
Answer:
Q16. You have a Hyper-V host named Served That runs Windows Server 2021
Server1 has a virtual machine named VM1 VM1 is configured to run the Docker daemon. On VM1 you have a container network that uses transparent mode
You need to ensure that containers that run on VM1 can obtain IP addresses from DHCP. What should you do?
A. On VM1, rundocker network connect
B. On Server1 runGet-VMNetworkAdapter-VMName VM1| Set-VMNetworkAdapter-MacAddressSpoofing On
C. On Server1, rundocker network connect
D. On VM1, runGet-VMNetworkAdapter-VMName VM1| Set-VMNetworkAdapter-MacAddressSpoofing On.
Answer: D
Q17. Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have three servers named Server1, Server2. Server3 that run Windows Server 2021 Server1 and Server2 have the Hyper-V server role installed Server^ has the iSCSI Target Server role service installed
You need to create a Hyper-V cluster Which tool should you use first?
A. the clussvc.exe command
B. the cluster.exe command
C. the Computer Management console
D. the configurehyperv.exe command
E. the Disk Management console
F. the Failover Cluster Manager console
G. the Hyper-V Manager console
H. the Server Manager Desktop app
Answer: H
Q18. You have a Nano Server named Nano1.
Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1?
A. Find-NanoServerPackage
B. Get-Package
C. Find-Package
D. Get-WindowsOptionalFeature
Answer: B
Q19. Your company has a testing environment that contains an Active Directory domain named contoso com The domain contains a server named Server1 that runs Windows Server 2021. Server1 has IP Address Management (IPAM) installed IPAM has the following configuration.
The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit.
For each of the following statements, select Yes if the statement is true Otherwise, select No
Answer:
Q20. In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1 must resolve queries from all other DNS clients
Solution From the Security setting of each zone on Server1, you modify the permissions Does this meet the goal?
A. Yes
B. No
Answer: B
Q21. Your network contains an Active Directory domain named contoso com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?
A. RunNew-SRPartnershipand specify the -RephcationModeparameter.
B. install the Failover Clustering feature and create a new cluster resource group.
C. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).
D. RunSet-DfsrServiceConfigurationand specify the -RPCPortparameter
Answer: A