The HP0-S42 certifications keep a significant and unique position in the planet of IT. So, theyre very well-liked for people who are eager to enter the IT planet. For those that are busy doing work or studying, go through the check on your own will be of wonderful difficulty. Taking HP HP0-S42 certification practice exam and putting some work and hours into it, you will help to make the check easier. It just takes a short span of time to help you within reaching the goal by our own HP0-S42 Pdf and exam applications. You will be capable of confidently accomplish the test after taking our own HP practice exams. We are generating the research materials precise and updated according to the adjustments made by the Pass4sure. You can download the HP HP0-S42 materials or practice tests timely and theyre completely no cost.
2021 Sep HP0-S42 free exam
Q71. You are planning an HP BladeSystem solution based on a c7000 enclosure. The customer has the connectivity requirement shown in the picture. Which interconnect configuration can you use to satisfy the customer’s requirements?
A. Virtual Connect Flex10 modules in interconnect bays 1 and 2 and virtual Connect 8 GB Fibre channel modules in bays 3 and four
B. HP 10GbE Pass-Thru modules in interconnect bays 1 and 2 and Brocade 9 Gb switches in bays 3 and 4
C. Virtual Connect FlexFabric modules in increment bays 1 and 2
D. Procurve 6120/XG modules in interconnect bays 1 and 2 and Brocades 8 Gb SAN switches in bays 3 and 4
Answer: A
Q72. A customer needs the health status of their HP ProLiant Gen8 BladeSystem servers to be reported to HP to allow automatic hardware warranty replacement. The customer does not plan to install additional software and does not have IT staff to support an additional solution. Which HP solution they implement?
A. Insight Remote Support central connect
B. Insight Online with Insight Remote Support
C. Insight Remote Support through the Insight Online portal
D. Insight Online direct connect
Answer: A
Q73. Which component of the iLO Management Engine monitors and records changes in server hardware?
A. Embedded Remote Support
B. Active Health System
C. Agentless Management
D. Intelligent Provisioning
Answer: D
Reference:
http://h20565.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03236853
Q74. A customer needs to improve VM host efficiency and lower network latency in their HP ProLiant DL380 Gen9 servers. Which unique technology built-in to the HP FlexFabric 556 network adapter will meet the customer’s requirement?
A. 10 Gb Ethernet support
B. TCP/IP Offload Engine (TOE)
C. RDMA over Converged Ethernet (ROCE)
D. IPv6 protocol support
Answer: C
Q75. A server in the computer room has a 2.5” 146GB hot-pluggable SAS disk with flashing LEDs.
It has a green LED that is flashing intermittently and an amber LED flashing at a regular interval
(1Hz). What does the status of these LEDs indicate?
A. The drive is active, but a predictive failure alert was received for this drive. Replace the drive as soon as possible.
B. The drive is active, and it is operating normally.
C. A critical fault condition was identified for this drive, and the controller placed it offline. Replace the drive as soon as possible.
D. The drive is offline, a spare, or not configured as part of an array
Answer: A
Abreast of the times HP0-S42 torrent:
Q76. A customer needs parallel data processing scalability for their custom financial analysis application. Which solution best meets the customer’s needs?
A. a collection of tower servers
B. high-performance technical cluster
C. a rack of 1U servers
D. a collection of blade servers
Answer: B
Q77. A customer purchased HP Intelligent Distribution Units (iPUDS) and wants to use intelligent Power Discovery. What is required for their current DL380 G7 services to work with this solution?
A. Common Slot-48VDC Plug Supply Kit
B. Common slot Platform Hot Plug Power Supply Kit for each server
C. An upgrade to an HP ProLiant Gen9
D. Common Slot Gold Hot Plug Supply Kit for each server
Answer: B
Reference: http://h18004.www1.hp.com/products/blades/thermal-logic/index.html (see Thermal logic innovations include – Intelligent power discovery)
Q78. One of your customer’s remote transaction servers generates an SNMP health alert. Which HP management tool should you use to access more information about the alert?
A. Insight Online
B. Intelligent Provisioning
C. Smart Update Manager
D. Smart Storage Administrator
Answer: B
Q79. A customer is concerned about the security of their data center. The exciting card entry system has proven to be inadequate. Which solution should you recommend to increase the security level for self-access to the data center?
A. complex passwords
B. fingerprint scanners
C. Access Control List
D. 256 AES encryption
Answer: C
Q80. An HP solution includes insight Control, iPDUs, and servers configured with Common Slot Plus PSUs. Which technological advantage does this HP solution provide?
A. Automated discovery and power configuration validation
B. Intelligent switching of three-phase to single phase power
C. Remote SNMP management of power regulators
D. Ability to boot servers using half the normal power requirement
Answer: A