What Validated HPE0-S58 Braindump Is

NEW QUESTION 1
A customer wants to add nodes to the existing ESXi cluster using the HPE OneView for vCenter Server. What must be done before this functionality can be used?

• A. The cluster must be imported to HPE OneView
• B. An additional VMkernel port must be created for OneView integration
• C. All local datastores must be disconnected or removed from the other cluster nodes
• D. At least one node of the cluster must be placed in the maintenance mode

Answer: A

NEW QUESTION 2
A customer tries to revert a data volume located on the HPE 3PAR array to a specific snapshot that was taken using HPE Composer, but the process fails. What must an integrator do to fix this problem?

• A. Install the snapshot agent on the operating system to enable online snapshot operations
• B. Select the “Force” checkbox to ignore the warning, and revert to the snapshot because this is a data volume
• C. Navigate to the SSMC and revert to the snapshot using HPE 3PAR tools
• D. Disconnect the volume from the server, then revert to the snapshot and reconnect back to the server

Answer: C

NEW QUESTION 3
A customer using HPE Synergy is unable to access certain VLANs from a single NIC port of a compute module.
Which configuration option in the server profile needs to be verified to ensure that the server profile has the correct configuration?

• A. multiple Networks are assigned to the connection
• B. multiple VLAN checkbox is selected
• C. VxLAN has not been enabled
• D. assigned Network Set includes all needed VLANs

Answer: D

NEW QUESTION 4
An integrator is installing three Synergy frames in different locations for a customer. As part of the installation, the customer requests a single monitoring dashboard that shows the current hardware status, warranty status, and open support cases of all three frames.
Which configuration steps must the integrator perform to provide the customer with this functionality?

• A. Enable Remote Support and Insight Online Integration in the Composer UI
• B. Install Insight Remote Support Advanced, and integrate it with HPE Global Dashboard
• C. Configure OneView with iLO Amplifier pack
• D. Activate iLO Federation on all installed compute nodes

Answer: C

NEW QUESTION 5
An integrator needs to configure a set of networks for Synergy compute nodes to send data to devices outside of a Synergy frame.
How should the integrator complete the task?

• A. Add the network to an interconnect bay within a Logical Enclosure (LE)
• B. Add the networks to an uplink set within a Logical Interconnect Group (LIG)
• C. Add the networks to an Enclosure Group (EG)
• D. Add the network sets to a Logical Interconnect Group (LIG)

Answer: A

NEW QUESTION 6
A customer is unable to boot to a 3.5TB volume created and presented to a compute node. What is likely preventing the boot?

• A. The system is set to UEFI instead of Legacy Boot mode
• B. The system is set to Legacy Boot mode instead of UEFI
• C. Boot volumes larger than 2.2TB are not supported on Synergy
• D. Boot volumes larger than 3TB are not supported on HPE Synergy

Answer: B

Explanation:
References: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05351907

NEW QUESTION 7
Which component must be deployed at the customer site and is essential for HPE InfoSight for Servers?

• A. HPE Intelligent Provisioning
• B. HPE Global Dashboard
• C. iLO Amplifier Pack
• D. HPE Composer

Answer: C

Explanation:
References: https://www.slideshare.net/Xylos/hpe-infosight-for-servers

NEW QUESTION 8
A customer needs to deploy a farm of Windows Server 2021 Hyper-V using an Image Streamer. The customer discovered that the OS Build Plan for this OS is not available from the Image Streamer interface.
How can the customer access all the tools and scripts needed to provision the required operating system?

• A. The customer has to update Image Streamer firmware, as with the new firmware all OS Build Plans are updated and new ones are added.
• B. The customer must buy an Image Streamer upgrade license to get support for the latest operating systems.
• C. The customer needs to download the artifact bundle from the internet that will provide all required components.
• D. The customer can use any Windows build plan because they are self-updating.

Answer: C

NEW QUESTION 9
Using a two-port FLM, what is the minimum number of frames needed to implement a solution that includes redundant Composers and Image Streamers?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: C

NEW QUESTION 10
An integrator needs to validate whether the datastore created for ESXi systems based on 3PAR virtual volume can support all DRS cluster functionalities.
Click on the parameter that the integrator needs to verify.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 11
An integrator is creating a server profile template for a VMware Cluster in a Synergy environment. The network administrator has given the server team two 40Gb uplinks with all 200 VLANs presented.
Click the appropriate network type that the integrator should select.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 12
A customer is using HPE Synergy Composer to manage the compute module and 3PAR volume attachments.
The datastore attached to the VMware servers has run out of space.
What is the most efficient procedure the integrator should follow to extend the volume with minimum effect on the compute modules?

• A. Set the volume to maintenance mode, and increase the volume in 3PAR SSMC
• B. Increase the capacity of the volume in the combined profile form
• C. Create a snapshot, and increase the capacity of the snapshot directly in the Synergy Composer
• D. Increase the capacity of the volume directly in the Synergy Composer

Answer: D

NEW QUESTION 13
A customer has a Hyper-V and ESXi hypervisors deployed on an HPE Synergy platform. The customer needs a tool that will provide health and performance monitoring. Because their environment is very dynamic, the tool should also help them to optimize performance and predict and prevent problems.
Which tool should the customer use?

• A. HPE InfoSight
• B. HPE OneView for vCenter Server
• C. HPE Composer
• D. HPE Global Dashboard

Answer: C

NEW QUESTION 14
Which management tool required by HPE Infosight must be deployed at the customer site?

• A. HPE Global Dashboard
• B. HPE OneView
• C. HPE iLO Amplifier
• D. HPE StoreServ Management Console (SSMC)

Answer: C

NEW QUESTION 15
Which tool should an integrator use to determine the power requirements of an HPE Synergy solution?

• A. HPE Product Bulletin
• B. HPE SalesBuilder for Windows
• C. HPE Synergy Planning Tool
• D. HPE SPOCK

Answer: C

NEW QUESTION 16
How can an integrator use an HPE Synergy D3940 storage module to provision shared storage to compute modules without requiring a separate SAN to be connected to the frame?

• A. Configure drives as DAS storage, and use Image Streamer to present the disks as iSCSI targets to the whole frame.
• B. Configure drives as SAN storage, and configure a Smart Array P416ie-m Controller into HBA mode.Add the SAN disk to the server profile.
• C. Configure drives as DAS storage, and use StoreVirtual VSA to present the disks as iSCSI storage to the whole frame.
• D. Configure drives as SAN storage, and configure a P240nr array controller into HBA mod
• E. Add the SAN disk to the server profile.

Answer: C

Explanation:
References: https://www.iistech.com/blog/composable-infrastructure-with-hpe-synergy-part-2

NEW QUESTION 17
A customer needs to upgrade an HPE Synergy 12000 frame with an HPE Virtual Connect SE 32Gb Fibre Channel (FC) Module.
Which steps must the integrator take to install the upgrade?

• A. Modify the Synergy 40Gb F8 Logical Interconnect Group (LIG), and add the FC uplink set and storage networks.
• B. Create one redundant Logical Interconnect Group (LIG) with two uplink sets, one for SAN-A and one for SAN-B.
• C. Create two new Logical Interconnect Groups (LIGs) that are non-redundant Side-A/Side-B, one for SAN-A and one for SAN-B.
• D. Edit the Enclosure Group and specify HPE Virtual Connect SE 32Gb FC Module in interconnect bays 1 and 2.

Answer: A

NEW QUESTION 18
Refer to the exhibit.

A customer has an HPE Synergy 2-frame configuration, as shown. The customer has a new project and needs to increase the number of compute modules.
What is the maximum number of compute nodes that the customer’s fabric could support?

• A. 24
• B. 36
• C. 48
• D. 60

Answer: D

NEW QUESTION 19
A customer is planning to deploy OneView for vCenter Server to improve management procedures for growing virtualization environment. The customer is concerned about resources required by HPE OneView for vCenter Server.
Which statement about deploying HPE OneView for vCenter Server is true?

• A. It is deployed as an application on the Windows Server machine with at least 48GB of memory.
• B. It is deployed as a part of the HPE Composer installation.
• C. It is deployed as a virtual machine on the supported hypervisor.
• D. It can only be deployed if HPE Global Dashboard is already installed.

Answer: C

NEW QUESTION 20
How many redundant fabrics are supported in an HPE Synergy frame?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: C

Explanation:
References: https://h20215.www2.hpe.com/v2/GetPDF.aspx/c04815113.pdf (2)

NEW QUESTION 21
In a 3-frame HPE Synergy environment, how should an integrator place the image Streamer modules to allow for redundancy to all of the management connections?

• A. one Image Streamer module in frame 2, and a second Image Streamer Module in frame 3 (2 total)
• B. two Image Streamer modules in frame 2, and two Image Streamer modules in frame 3 (4 total)
• C. one Image Streamer module in each Synergy frame (3 total)
• D. two Image Streamer modules in frame 1 (2 total)

Answer: B

NEW QUESTION 22
Which operating systems are supported for use with Image Streamer? (Choose two.)

• A. VMware ESXi 6.7
• B. CentOS 7.2
• C. SUSE Linux Enterprise Server 11
• D. Windows Hyper-V 2021
• E. Red Hat Enterprise Linux 7.3

Answer: DE

Explanation:
References:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00061945en_us&docLocale=en_US

NEW QUESTION 23
......