Most Recent MS-721 Training Materials For Collaboration Communications Systems Engineer Certification

NEW QUESTION 1

You have a Microsoft Teams Phone deployment that contains two users named User1 and User2. User1 will be on leave for two weeks.
You need to redirect all calls to the phone number of User1 to the phone number of User2. The solution must minimize administrative effort.
What should you modify for User1?

• A. the voicemail transfer target settings
• B. the call delay and order settings
• C. the call delegation settings
• D. the phone number type

Answer: C

Explanation:
Use the Teams admin center
You can use the Teams admin center to configure call forward and unanswered settings, group call pickup, and call delegation for your users.
To configure immediate call forward settings:
In the Teams admin center, go to Users > Manage users and select a user.
On the user details page, go to the Voice tab.
Under Call answering rules, select Be immediately forwarded, and select the appropriate call forward type and destination.
To configure simultaneous ringing, on the same page select Ring the user's devices. In the Also allow drop-down, select the appropriate simultaneous ringing setting.
To configure unanswered settings, on the same page select the appropriate setting in the If unanswered
drop-down. In the Ring for this many seconds before redirecting drop-down, specify the number of seconds to wait.
The configuration of call delegation and group call pickup are integrated into the call forward and unanswered settings by selecting the appropriate type. For example, to configure that calls should also ring the user's delegates, on the same page select Call delegation under Also allow. Then add the appropriate delegates by selecting Add people and clicking Save.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/user-call-settings

NEW QUESTION 2

You have a Microsoft Teams Phone deployment.
You have two users that must receive calls for one another. When a call is received by one user, the other user must only receive a visual notification.
What should you use?

• A. a calling policy
• B. call delegation
• C. group call pickup
• D. call parte and retrieve
• E. call forwarding

Answer: C

NEW QUESTION 3

You have a Teams Phone deployment that uses Direct Routing on a single Session Border Controller (SBC). Users report that outbound PSTN calls are failing, but inbound PSTN calls are successful.
When you review the SBC logs, you discover that Microsoft is responding to SIP option requests, but is NOT sending SIP option requests.
What is the cause of the issue?

• A. The online PSTN gateway is disabled.
• B. An SBC certificate is expired.
• C. An external DNS entry is missing from the FQDN of the SBC.
• D. The phone numbers of the users are defined by running the New-csTeamsUnassignedNuirtoer Treatment cmdlet.

Answer: A

Explanation:
Issues that affect outbound direct routing calls
You might experience various issues when you use Direct Routing to make outbound calls from a Microsoft Teams client to a Session Border Controller (SBC). These issues include the following:
An incorrect caller ID is displayed to the call recipient. A connection to the SBC is not established.
Some users in a tenant are unable to make calls. No users in a tenant are able to make calls.
No users are able to make calls
If none of the users are able to make calls, the calls are probably not reaching the SBC. Check for one of the following causes.
Cause 1
Teams has a disabled gateway. Resolution 1
Use the Microsoft Teams admin center to make sure that the gateway that's used by Teams is available and enabled.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/troubleshoot/phone-system/direct-routing/issues-with-outboun

NEW QUESTION 4

You have a Microsoft Teams Phone deployment.
You need to configure voice routing for Direct Routing. The solution must only allow calling within the United States and Canada for a user named user1 ©contosoxom.
Which four actions should you perform in sequence to minimize user call disruption? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 5

You have a dial plan named DPI.
You need to assign DPI to a new Microsoft Teams user named User1. You must verify that the appropriate dial plan and the associated normalization rules are assigned to User1.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 6

You have a Microsoft Teams Phone deployment that uses Direct Routing.
You plan to use Microsoft Power BI to analyze Call Quality Dashboard (CQD) data for the deployment. You download the Power BI query templates for CQD from the Microsoft Download Center.
You need to use Power BI Desktop to review reports about PSTN calls that go through Direct Routing. What should you do first?

• A. From Microsoft Call Quality Dashboard download the current Tenant Data Upload file
• B. Publish the template to the Power B[ service.
• C. Install the Power Bl Connector for CQD.
• D. Install the Microsoft Power Platform connector.

Answer: C

Explanation:
Before you can use these PBIT files, you'll need to Install the Power BI Connector for Microsoft CQD using the MicrosoftCallQuality.pqx file included in the download.
Reference:
https://docs.microsoft.com/en-us/microsoftteams/cqd-power-bi-query-templates

NEW QUESTION 7

You are selecting devices for use in conference rooms. The conference rooms must support two front of room displays.
Which two types of devices meet the requirements? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

• A. Microsoft Teams Rooms on Android
• B. Microsoft Teams displays
• C. Microsoft Teams audio conference phones
• D. Microsoft Teams Rooms on Windows
• E. Microsoft Surface Hub 2S

Answer: AD

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/rooms/teams-devices-feature-comparison

NEW QUESTION 8

You have a Microsoft Teams Phone deployment that contains common area phones located in a public lobby. You need to enable Advanced calling features on all the common area phones.
What should you configure from the Microsoft Teams admin center?

• A. a customization policy
• B. a configuration profile
• C. a calling policy
• D. a policy package

Answer: B

Explanation:
Set up common area phones for Microsoft Teams Set policies for common area phones
Use policies to control which features are available to users on common area phones. Set up Advanced calling on common area phones (optional)
By default, the basic calling experience will be on the common area phone's home screen, but you can turn on an advanced calling experience.
To use these advanced calling features on supported Teams phone device models, you can turn on the Advanced calling toggle in the Teams admin center or on your Teams phone device that is signed into your Teams Shared Devices account.
Turning on advanced calling capabilities requires you to purchase hardware models that can support all required capabilities.
* 1. Turn on Advanced calling in Teams admin center
* 2. Sign into the Teams admin center with a Microsoft 365 admin account.
* 3. From the left-side menu, navigate to Teams devices > Phones > and select the Configuration profiles tab.
* 4. From the list, select the configuration profile assigned to your common area phone.
* 5. Under the Calling settings section, find the Advanced calling toggle.
* 6. Turn on the toggle.
* 7. At the bottom of the page, select the Save button. Incorrect:
Not C: Calling policies
Use calling policies to enable private calls, using call forwarding, or simultaneous ring on common area phones.
Note: A common area phone is typically placed in an area like a lobby or another area that is available to many people to make a call: a reception area, lobby, or conference phone. Common area phones are signed in with accounts tied to a Microsoft Teams Shared Devices license.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/set-up-common-area-phones

NEW QUESTION 9

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are optimizing a network to better support voice and collaboration workloads in Microsoft Teams. When the users are at a specific corporate site, you need to prevent the users from adding video during calls. Solution: You run New-CsTeamsMeetingPolicy and set the -MediaBitRateKb parameter to 1.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
Instead run New-CsTeamsNetworkRoamingPolicy and set the -AllowIPVideo parameter to $False.
Note: The New-CsTeamsNetworkRoamingPolicy cmdlet allows IT Admins to create policies for Network Roaming and Bandwidth Control experiences in Microsoft Teams.
The TeamsNetworkRoamingPolicy cmdlets enable administrators to provide specific settings from the TeamsMeetingPolicy to be rendered dynamically based upon the location of the Teams client. The TeamsNetworkRoamingPolicy cannot be granted to a user but instead can be assigned to a network site. The settings from the TeamsMeetingPolicy included are AllowIPVideo and MediaBitRateKb. When a Teams
client is connected to a network site where a CsTeamRoamingPolicy is assigned, these two settings from the TeamsRoamingPolicy will be used instead of the settings from the TeamsMeetingPolicy.
Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/new-csteamsnetworkroamingpolicy

NEW QUESTION 10

Your company has an office in Seattle.
The default dial-in number for the company's Microsoft Teams meetings has an area code of 425.
The company does NOT have an office in New York. However, most of the company's customers are in New York.
You need to get a new default dial- In number that has a local 718 area code. You will NOT define additional location information in Teams.
Which two actions should you perform before you assign the bridge? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. Get a Dedicated conference bridge (Toll) number.
• B. Search for new numbers by using a 718 area code.
• C. Get an auto attendant toll-free number.
• D. Get a Dedicated conference bridge (Toll Free) number.
• E. Search for new numbers by using New York.

Answer: AD

NEW QUESTION 11

You need to ensure that numbers dialed from the Melbourne warehouse conform to the dialing rules of the phone earner. How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 12

Your company assigns an Office 365 E3 license to each user. All users are in France.
You plan to deploy Direct Routing.
Which additional license should you assign to the users?

• A. Microsoft 36S Domestic and International Calling Plan
• B. Microsoft Teams Phone Standard - Virtual User
• C. Microsoft 36S Domestic Calling Plan
• D. Microsoft 365 Audio Conferencing
• E. Microsoft Teams Phone Standard

Answer: E

NEW QUESTION 13

You have a Microsoft Teams Phone deployment. Direct Routing is enabled for all users. The users can place and receive PSTN calls.
You need to create a new user policy to provide four-digit extension dialing for users to call analog endpoints that connect to the Session Border Controller (SBC).
Which three actions should you perform? Each correct answer presents part of the solution.

• A. Create a trunk translation rule.
• B. Create an IP phone policy.
• C. Assign a dial plan to the users.
• D. Assign an IP phone policy to the users.
• E. Create a voice normalization rule.
• F. Create a tenant dial plan.

Answer: CEF

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/what-are-dial-plans https://docs.microsoft.com/en-us/microsoftteams/create-and-manage-dial-plans

NEW QUESTION 14

You have a Teams Phone deployment. The deployment has a single Session 3crder Controller (SBC) that uses Direct Routing.
Users report that outbound PSTN calls fail.
You need to identify the quantity of specific SBC SIP errors. What should you review m the Microsoft Teams admin center?

• A. Endpoint Reports in Microsoft Call Quality Dashboard
• B. the network effectiveness ratio on the usage tab for the SBC
• C. the Jitter tab in Network parameters
• D. Quality of Experience Reports in Microsoft Call Quality Dashboard

Answer: A

NEW QUESTION 15

Your company receives PSTN services in Microsoft Teams through a derived Direct Routing trunk from a telephone carrier.
The carrier becomes an operator in the Operator Connect program. You need to migrate the users to Operator Connect.
Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. Run the Set-CsUser cmdlet and set the –OnPremLineURI parameter to $null.
• B. Run the Grant-CsOnlineVoiceRoutingPolicy cmdlet and set the–Policyname parameter to Policy1.
• C. Run the Grant-CsOnlineVoiceRoutingPolicy cmdlet and set the–Policyname parameter to $null.
• D. Run the Set-CsOnlineVoiceUser cmdlet and set the –TelephoneNumber parameter to each user's phone number.
• E. Run the Set-CsOnlineVoiceUser cmdlet and set the –TelephoneNumber parameter to $null.
• F. Run the Set-CsUser cmdlet and set the –OnPremLineURI parameter to each user's phone number.

Answer: ACD

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/operator-connect-configure https://docs.microsoft.com/en-us/microsoftteams/assign-change-or-remove-a-phone-number-for-a-user

NEW QUESTION 16

You are adding new sites to your company.
The reporting team needs location-based reports in Microsoft Power B1 that include the subnet information of the new sites.
You need to add the information to Microsoft Teams. What should you do?

• A. From the Microsoft Call Quality Dashboard, upload tenant data.
• B. From the Microsoft Teams admin center, define a network subnet.
• C. From the Microsoft Teams admin center, define a network topology.
• D. From the Microsoft Teams admin center, add the subnets to the Network planner.

Answer: A

Explanation:
Reference: https://docs.microsoft.com/en-us/microsoftteams/cqd-upload-tenant-building-data

NEW QUESTION 17
......