Exam Code: PW0-071 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Certified Wireless Technology Specialist - Sales (CWTS)
Certification Provider: CWNA
Free Today! Guaranteed Training- Pass PW0-071 Exam.
Q22. - (Topic 5)
What is the most likely cause of low throughput on a hotel's guest network?
A. The 1.5 Mbps Internet connection is creating a bottleneck for the Wi-Fi users.
B. The user's laptop does not have 54 Mbps data rate enabled.
C. The strong security methods used with public access networks often cause low throughput.
D. The user is too close to the servicing access point.
Answer: A
Q23. - (Topic 2)
ABC Company would like to provide Wi-Fi coverage to the area highlighted on the floorplan in the exhibit.
If mounted at location-A, what type of antenna would provide a coverage pattern similar to the highlighted area?
A. Diversity Patch
B. High-gain Yagi
C. Parabolic Grid
D. Low-gain Dipole
E. Sectorized Array
Answer: A
Q24. - (Topic 6)
Which Wi-Fi vertical market applications are regulated by a government or industry group for security compliance? (Choose 2)
A. Patient records in hospitals
B. Guest Internet services in coffee shops
C. Inventory management in warehouses
D. Location services on cargo ships
E. Consumer payment information in retail stores
Answer: A,E
Q25. - (Topic 1)
Wi-Fi certified network devices can operate in what frequency band(s)?
A. 2.4 GHz only
B. 900 MHz, 2.4 GHz, and 5 GHz
C. 2.4 GHz and 5 GHz
D. 5.8 GHz only
Answer: C
Q26. - (Topic 3)
What unit of measurement is used to measure the power difference between two RF signals?
A. Joule
B. Decibel
C. Ohm
D. Volt
E. Ampere
Answer: B
Q27. - (Topic 2)
Given: You are recommending an AP for use in a warehouse environment. Some APs will require directional antennas and others will use dipole antennas.
What feature must be supported by the APs in this installation?
A. Multiple SSIDs
B. Grounding wire connectors
C. Pole mounts
D. External antennas
E. Variable output power
Answer: D
Q28. - (Topic 5)
In a typical office building, Wi-Fi clients are likely to experience poor Wi-Fi coverage in what locations? (Choose 2)
A. Cubicles
B. Enclosed offices
C. Hallways
D. Elevators
E. Stairwells
Answer: D,E
Q29. - (Topic 1)
Select the statement that correctly describes the Wi-Fi Alliance's primary role in the WLAN industry.
A. The Wi-Fi Alliance is a WLAN industry analyst firm that reports market trends and developments.
B. The Wi-Fi Alliance ensures interoperability of band selection and power settings across regulatory domains.
C. The Wi-Fi Alliance creates compliance standards around which vendors can develop products.
D. The Wi-Fi Alliance creates recommended practices by which the IEEE can test and certify product interoperability.
E. The Wi-Fi Alliance tests and certifies product interoperability based upon standards created by the IEEE.
Answer: E
Q30. - (Topic 1)
As a new salesperson for ABC Company's Golden Gate division, you are tasked with selling Wi-Fi equipment. While evaluating the manufacturer's specifications for a specific Wi-Fi device, you read that this device supports 802.1X/EAP. What capability does this feature provide?
A. QoS for multimedia applications
B. Power Save functionality
C. Air Time Fairness
D. User identity validation
Answer: D
Q31. - (Topic 3)
Which statement best defines SNR?
A. The difference between the noise floor and a signal's strength
B. The technology used to detect objects using RF waves
C. The absolute measurement of signal strength at the receiver
D. The frequency of the RF signal compared to that of an interferer
Answer: A
Q32. - (Topic 6)
Identify the strongest passphrase-based security mechanism for 802.11 wireless networks.
A. TKIP
B. WPA-PSK
C. WPA2-Personal
D. RC4
E. WEP
Answer: C
Q33. - (Topic 2)
Given: ABC Company has asked you to recommend a solution that will provide wireless connectivity for desktop computers at various locations in their warehouse. The locations of the desktop computers prevent the use of Cat5e cabling.
What type of client adapter would provide Wi-Fi connectivity to these desktop computers?
A. USB 2.0
B. Mini-PCIe
C. ExpressCard
D. CardBus
E. Secure Digital
Answer: A
Q34. - (Topic 1)
The two most common modes of WLAN discovery are passive scanning, where a client station listens for _________ frames, and active scanning, where a client sends and receives _________ frames.
A. Data ; Null
B. SSID ; Management
C. Beacon ; Probe
D. Probe Response ; Broadcast
E. Discovery ; Control
Answer: C
Q35. - (Topic 4)
What statement accurately describes an advantage of manual RF site surveys over predictive site surveys?
A. Manual site surveys are useful for locating and identifying sources of RF interference, while predictive site surveys are not capable of this task.
B. Manual site surveys are more efficient than predictive site surveys in large facilities because GPS mapping can be used.
C. Manual site surveys are more accurate than predictive site surveys because they take advantage of complex computer simulations.
D. Manual site surveys allow the site surveyor to create a static RF environment, whereas predictive site surveys are subject to changes in the RF environment.
Answer: A
Q36. - (Topic 3)
What two factors are used to calculate the wavelength of an RF wave? (Choose 2)
A. Frequency
B. Speed of light
C. Amplitude
D. Phase
Answer: A,B
Q37. - (Topic 2)
After installing a wireless client adapter into a laptop computer, what software is required to use the adapter and to configure it to connect to a Wi-Fi network? (Choose 2)
A. Web Browser
B. Client Utility
C. Protocol Analyzer
D. Captive Portal
E. Device Driver
Answer: B,E
Q38. - (Topic 2)
As a salesperson, you have been contacted by an automobile dealership that currently manages each of their 5 SOHO-class access points individually. The owner of the dealership contracts his nephew for the dealership's network administration, but the nephew admits to a limited knowledge of WLAN technology. The dealership owner and his nephew want you to advise them on how they can simplify the management of their wireless network. You tell them that they are currently managing __________ access
points, and they could consider _____________ to ease the management burden.
A. Autonomous; a WLAN controller-based architecture
B. Mesh; a Wireless Network Management System
C. MIMO; copying one configuration file and importing it into the other access points
D. Root; installing a Wireless Intrusion Protection System (WIPS) for management
E. Controller-based; a WLAN controller to manage their current access points
Answer: A
Q39. - (Topic 3)
Which Wi-Fi technology simultaneously uses multiple radio chains to transmit or receive data?
A. High Rate Direct Sequencing Spread Spectrum (HR/DSSS)
B. Orthogonal Frequency Division Multiplexing (OFDM)
C. Extended Rate Physical (ERP)
D. Multiple Input, Multiple Output (MIMO)
Answer: D
Q40. - (Topic 4)
In preparation for site surveys, your company is creating a questionnaire that will help you understand your customer's client connectivity requirements. What question is NOT appropriate for your company's pre-survey questionnaire?
A. What applications will be used by Wi-Fi client devices on the wireless network?
B. How will Power over Ethernet (PoE) be supplied to Wi-Fi client devices?
C. How many concurrent Wi-Fi client connections are expected on the wireless network?
D. What types of Wi-Fi client devices will be connected to the wireless network?
E. What 802.11 physical technology (PHY) will be used by the Wi-Fi client devices?
Answer: B
Q41. - (Topic 3)
Exhibit:
In what type of Wi-Fi deployment is an antenna mounted using a pole mounting kit, as shown in the exhibit?
A. Indoor Mesh
B. Outdoor Bridging
C. Office space APs
D. Hotel guest access
Answer: B
Q42. - (Topic 5)
Where is the use of a Wireless Internet Service Provider (WISP) most appropriate?
A. Wi-Fi bridging between two or more buildings within a city
B. To provide guest access to the Internet in an office building
C. As hot-spot connectivity in large airports and conference centers
D. Last mile wireless data delivery to homes and businesses
Answer: D