The sample test papers are produced with the combination in the technical questions and logical, verified explanations. Absolutely no other web site can supply you these kinds of wonderful experience. Master all of the necessary contents for that VMware VCP550 actual test is a great easy work after acquiring help through Testking. Our qualified That experts get rich knowledge in compiling the VMware VCP550 exam training materials. They study the subject matters from the related companies and take these into the genuine questions. You will find what you want to make for the VMware VCP550 exam.

2021 Oct VCP550 practice exam

Q101. -- Exhibit ---

- Exhibit --

The vSphere administrator needs to remove the Production virtual machine port group from an ESXi host. The ESXi host's Networking Configuration tab is shown in the exhibit. 

After disconnecting the Fileserver02 VM, what step does the administrator need to take, assuming that vSwitch1 will still be needed for further configuration? 

A. Remove the Production port group by accessing the properties for the port group. 

B. Remove the Production port group by accessing the properties for vSwitch1. 

C. Remove the Production port group by accessing the properties for the Network. 

D. Remove the Production port group by removing vSwitch1. 

Answer:


Q102. A vSphere administrator manages a three host cluster with 20 VMs. The HA cluster is configured with the Host Failures the Cluster Tolerates admission control policy and all other settings are set to default values. The administrator determines that one of the VMs is not able to power on. After further inspection, it is determined that this VM cannot power on because of a very large CPU reservation. 

Which cluster advanced HA setting can the administrator modify to enable the virtual machine to power on? 

A. Lower das.vmcpumaxmhz attribute value 

B. Higher das.vmcpuminmhz attribute value 

C. Lower das.slotcpuoutmhz attribute value 

D. Higher das.slotcpuinmhz attribute value 

Answer:


Q103. -- Exhibit --

-- Exhibit --

Why is the network configuration shown in the exhibit impossible? 

A. A single vmnic cannot be shared by two virtual switches. 

B. The MAC address of the Management Network VMkernel port is invalid. 

C. Virtual machines are not allowed to run on the same virtual machine port group as the vCenter Server Virtual Appliance. 

D. Virtual Machine Port Groups and VMkernel Ports are not allowed on the same virtual switch. 

Answer:


Q104. A vSphere administrator observes a problem with the Virtual SAN Cluster Setting as shown: 

-- Exhibit --

-- Exhibit --

Which action should the administrator take on the vmkernel portgroup on all hosts used by Virtual SAN cluster to resolve this problem? 

A. Select the Virtual SAN traffic option 

B. Increase the MTU value 

C. Change the DNS server address 

D. Increase the Port Speed 

Answer:


Q105. A number of virtual machines in a vSphere 5.5 DRS cluster are connected to the same virtual switch port group. After several of these VMs are migrated to another host, an administrator notices that they have lost network connectivity. The Events tab in vCenter Server shows this error message: 

Failed to initialize ethernet0. 

The vmkernel log file on the host running the affected VMs contains this message: 

Can't connect device:'port group name': Out of resources. 

Which caused this issue? 

A. Network I/O Control was enabled. 

B. The DRS cluster containing the VMs was set to Fully Automated with the Migration Threshold set to Conservative. 

C. There were insufficient uplinks configured on the virtual switches. 

D. The virtual switch port allocation was changed from the default setting. 

Answer:


Up to the immediate present VCP550 free practice exam:

Q106. A vSphere administrator needs to add redundancy to an ESXi 5.x management network on a vSphere Standard Switch. 

Which method should the administrator use to create redundant management networks? 

A. Configure the management network vSwitch with two active uplinks 

B. Configure an additional management portgroup on the same vSwitch 

C. Create a second management network on a second vSwitch in the same subnet 

D. Create a second management network on the same vSwitch in the same subnet 

Answer:


Q107. The administrator has deployed a third-party virtual appliance in the organization's vSphere environment and needs to use Update Manager to maintain the third-party appliance. 

How should the administrator accomplish this task with the least administrative effort? 

A. Add a new Download Source to Update Manager to obtain updates from the third party 

B. Manually download the third-party updates to Update Manager, which will then apply them to the appliance 

C. Obtain an update tool from the third party and use it to manage updates to the appliance 

D. Identify the third-party appliance from the supported list within Update Manager 

Answer:


Q108. -- Exhibit --

-- Exhibit --

An administrator determines that traffic shaping does not appear to be working on Production, a virtual machine port group on vSwitch1. Traffic shaping is working on all other port groups on the switch. 

The administrator examines the Traffic Shaping settings as shown in the exhibit: 

What should the administrator do to resolve the problem? 

A. Select the Status checkbox to enable Traffic Shaping on the portgroup. 

B. Reduce the Average Bandwidth to 50% of the Peak Bandwidth. 

C. Reduce the Burst Size to 50% of the Peak Bandwidth. 

D. Click the Security tab and create the necessary security exception. 

Answer:


Q109. Why would a vSphere administrator configure resource shares for a virtual machine? A. To prioritize access to a resource during contention 

B. To guarantee access to a resource during contention 

C. To prioritize access to a resource at all times 

D. To guarantee access to a resource at all times 

Answer:


Q110. An administrator needs to configure an alarm that notifies administrators if an application is impacted by overcommitment of memory resources. The environment consists of 100 virtual machines running on 5 ESXi hosts that are configured in a fully automated HA/DRS cluster. The cluster is configured with a parent resource pool and Production and Development child pools. 

Where should the administrator set the alarm to meet the requirement? 

A. On each virtual machine 

B. On each host 

C. On the Production resource pool 

D. On the cluster 

Answer: