Ucertify offers free demo for 300 070 ciptv1 exam. "Implementing Cisco IP Telephony & Video, Part 1 v1.0", also known as 300 070 ciptv1 pdf exam, is a Cisco Certification. This set of posts, Passing the Cisco cisco 300 070 exam, will help you answer those questions. The 300 070 ciptv1 Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco cisco 300 070 exams and revised by experts!
Q41. Which two options are applications that support service categories in Cisco Unified CommunicationsManager? (Choose two)
A. WAV
B. Java MIDlet
C. CSV
D. XML
Answer: B,D
Explanation: Reference:
Page 733
Cisco Unified Communications Manager Administration Guide, Release 10.0(1)
Q42. Which mechanism is often configured on the edges of a network to control the maximum rate of traffic that is sent or received on an interface and to classify the traffic into priority levels or class of service?
A. routing
B. shaping
C. policing
D. access control
E. traffic regulation
Answer: C
Q43. Refer to the exhibit.
What is the command to place the static IP address by CLI in the CiscoTelePresence MSE 8000?
A. MSE 8050: static 0 10.10.2.13 255.255.255.255 10.10.2.1 200.87.100.10 200.87.100.20.
B. MSE 8050: static 0 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
C. MSE 8050: static 1 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
D. MSE 8050: static ip 0 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
Answer: B
Q44. Which discard digits instruction removes all digits prior to the North American Numbering Plan portion of the route pattern?
A. PreDot
B. PreAt
C. Pre
D. PreNANP
Answer: B
Q45. What are four features of Cisco Unified Border Element? (Choose four).
A. Protocol Interworking.
B. Bandwidth Control.
C. Admission Request.
D. Automated Alternate Routing.
E. Address Hiding.
F. Security.
G. Video Integration.
Answer: A,F,G
Explanation: Reference:
Page 248
CIPTV110SG_Vol1
Q46. Which four modes are available on the Cisco TelePresence MCU MSE 8510 to connect to a gatekeeper? (Choose four.)
A. direct mode
B. H.225-routed mode
C. H.265-routed mode
D. H.245-routed mode
E. full proxy mode
F. partial proxy mode
Answer: A,B,D,E
Q47. Which distribution algorithm is used for a route group?
A. Circular, top down.
B. Longest idle, broadcast.
C. Circular, top down, longest idle, broadcast.
D. Top down, broadcast, circular.
Answer: A
Explanation:
Reference:
Page 199
Cisco Unified Communications Manager Administration Guide, Release 10.0(1)
Q48. You are a Voice Engineer at ABC Company. You want to provision a new voice gateway for a remotesite, and you need to configure 24 channels of a T1 CAS interface. Which set is the correct set ofcommands for this configuration?
A. R1(config)# controller t1 1/0
R1(config-controller)# framing esf
R1(config-controller)# linecode b8zs
R1(config-controller)# primary-group 1 timeslot 1-24 type fxo-loop-start
B. R1(config)# controller t1 1/0
R1(config-controller)# linecode hdb3
R1(config-controller)# framing crc4
R1(config-controller)# clock source line
R1(config-controller)# ds0-group 1 timeslot 1-24 type fxo-loop-start
C. R1(config)# isdn switch-type primary-5ess
R1(config)# controller t1 t1/0
R1(config-controller)# pri-group timeslots 1-24
D. R1(config)# controller t1 1/0
R1(config-controller)# framing esf
R1(config-controller)# linecode b8zs
R1(config-controller)# clock source line
R1(config-controller)# ds0-group 1 timeslot 1-24 type fxo-loop-start
Answer: D
Explanation: Reference:
Page 9-11 http://www.cisco.com/c/en/us/td/docs/ios/voice/isdn/configuration/guide/12_4t/vi_12_4t_bo ok/
vi_imp_t1cas_voip.pdf
Q49. Which two options are IOS conference bridge types in CUCM? (Choose two)
A. CiscoIOS Enhanced Conference Bridge
B. CiscoIOS Standard Conference Bridge
C. CiscoIOS Software Conference Bridge
D. CiscoIOS Hardware Conference Bridge
E. Cisco IOS Conference Bridge
Answer: A,E
Explanation: Reference:
Page 367
Cisco Unified Communications Manager Administration Guide, Release 10.0(1)
Q50. Which three Cisco Unified Communications Manager settings can be used to support IP phone services? (Choose three.)
A. Device Defaults
B. Enterprise Parameters
C. IP Phone Service Configuration window
D. Common Phone Profile
E. Service Parameters
F. Phone Configuration window
Answer: B,D,F