Ucertifys Cisco certification exam training materials contain the core information and that may well appear in the real exam. All of us keep serving each of our customers using the best goods. With the examination engine, you can identify weak areas to prepare better. Consider notes around the Pdf files and circumscribe your errors within red. Review your errors after again; then you will master the comprehensive information and make full preparation to your Cisco certification exam.
2021 Mar 300-075 exam price
Q121. Refer to the exhibit.
If an IP phone in San Jose roams to New York, which two IP phone settings will be modified by Device Mobility so that the phone can place and receive calls in New York? (Choose two.)
A. The physical locations are not different, so the configuration of the phone is not modified.
B. The physical locations are different, so the roaming-sensitive parameters of the roaming device pool are applied.
C. The device mobility groups are the same, so the Device Mobility-related settings are applied in addition to the roaming-sensitive parameters.
D. The Device Mobility information is associated with one or more device pools other than the home device pool of the phone, so one of the associated device pools is chosen based on a round-robin load-sharing algorithm.
E. The Device Mobility information is associated with the home device pool of the phone, so the phone is considered to be in its home location. Device Mobility will reconfigure the roaming-sensitive settings of the phone.
Answer: B,C
Q122. Assume that the Cisco IOS SAF Forwarder is configured correctly. Which minimum configurations on Cisco Unified Communications Manager are needed for the SAF registration to take place?
A. SAF Trunk, SAF Security Profile, SAF Forwarder, and CCD Advertising Service
B. SAF Trunk, SAF Security Profile, SAF Forwarder, and CCD Requesting Service
C. SAF Trunk, SAF Security Profile, SAF Forwarder, CCD Requesting Service, and CCD Advertising Service
D. SAF Trunk, SAF Security Profile, and SAF Forwarder
E. SAF Trunk, CCD Requesting Service, and CCD Advertising Service
Answer: B
Q123. When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished?
A. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI.
B. In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns.
C. Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns.
D. In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls.
Answer: C
Explanation:
Incorrect Answer: A, B, D calling party transformation mask value is Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character +. Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03trpat.ht ml
Q124. Company A has deployed a VCS Control and is attempting to register a third-party endpoint. The engineer has confirmed that no traffic is being blocked for the endpoint and it is receiving a valid IP address. Which option could be the cause of this registration failure?
A. Third-party endpoints are not compatible with VCS Control, only with VCS Expressway.
B. Cisco Unified Communications Manager is required in addition to the VCS Control.
C. An incorrect SIP domain is configured on the VCS Control for the endpoint.
D. The VCS Control must be deployed together with VCS Expressway before endpoints can register to either one.
Answer: C
Q125. What command is used to map internal extensions to the corresponding E.164 PSTN number when using Cisco Unified Communications Manager Express in SRST mode?
A. ephone-dn
B. dialplan-pattern
C. number
D. number-e.164
E. ephone-transnumber
Answer: B
Replace 300-075 real exam:
Q126. When using Cisco Unified Communications Manager Express in SRST mode, how many multicast music on hold streams can be utilized by the system at any given time?
A. 3
B. 6
C. 2
D. 4
E. 1
F. 5
Answer: B
Q127. On which two call legs is the media encryption enforced in a Collaboration Edge design? (Choose two.)
A. Expressway-C to Cisco Unified Communications Manager
B. Expressway-C to Expressway-E
C. Expressway-E to outside-located endpoint
D. Expressway-E to Cisco Unified Communications Manager
E. Expressway-C to internal endpoint
Answer: B,C
Q128. Refer to the exhibit.
Assume that the HQ phones have access to the HQ partition, and BR phones have access to the BR partition. Which set of implementations would best address the overlapping directory number extensions for intersite (WAN) calling between the HQ site and the BR site?
A. Configure a route pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Configure the called party DDI of Predot.Configure a route pattern for site BR 8111.[1-3]XXX, and assign it to partition BR. Configure called party DDI Predot.Use the local gateway at each site. Prefix the appropriate site code for the calling number.
B. Configure a single route pattern for both sites 8[12,12,12].[1-32]XXX. Use a route list that contains the local route group for each site. Prefix the appropriate site code for the calling number.
C. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number.
D. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number.
Answer: C
Q129. Refer to the exhibit.
Which configuration change is needed to enable NANP international dialing during MGCP fallback?
A. Change the dial peer to dial-peer voice 901 voip.
B. Change the dial peer to dial-peer voice 9011 pots.
C. Add the command prefix 011 to the dial peer.
D. Add the command prefix 9011 to the dial peer.
Answer: C
Q130. Which method can be used to address variable-length dial plans?
A. Overlap sending and receiving.
B. Add a prefix for all calls that are longer than 10-digits long
C. Use nested translation patterns to eliminate inter-digit timeout
D. Use the @macro on the route pattern
E. Use MGCP gateways, which support variable-length dial plans
Answer: A
Explanation:
Incorrect Answer: B, C, D, E If the dial plan contains overlapping patterns, Cisco Unified Communications Manager does not route the call until the interdigit timer expires (even if it is possible to dial a sequence of digits to choose a current match). Check this check box to interrupt interdigit timing when Cisco Unified Communications Manager must route a call immediately. By default, the Urgent Priority check box displays as checked. Unless your dial plan contains overlapping patterns or variable length patterns that contain!, Cisco recommends that you do not uncheck the check box. Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsintrcm.htm