Proper study guides for Down to date Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certified begins with Cisco 300 075 pdf preparation products which designed to deliver the Highest Quality 300 075 dump questions by making you pass the cisco 300 075 test at your first time. Try the free 300 075 dump demo right now.
Q1. What is the purpose of configuring a hardware-based MTP when deploying Cisco Unified Communications Manager?
A. to allow for supplementary services such as hold, transfer, and conferencing
B. when you need support for up to 24 MTP sessions on the same server and 48 on a separate server
C. when you need the ability to grow support by using DSPs
D. when you want to only use Cisco Unified Communications Manager resources
Answer: C
Q2. Refer to the exhibit.
When a call between two HQ users is being conferenced with a remote user at BR, which configuration is needed?
A. The BR_MRG must contain the transcoder device. The BR_MRGL must be assigned to the BR phones.
B. The HQ_MRG must contain the transcoder device. The HQ_MRGL must be assigned to the HQ phones.
C. A transcoder should be configured at the remote site and assigned to all remote phones through the BR_MRGL.
D. The HQ_MRG must contain the transcoder device. The HQ_MRGL must be assigned to the software conference bridge.
E. Enable the software conference bridge to support the G.711 and G.729 codecs in Cisco Unified Communications Manager Service Parameters.
Answer: D
Q3. Which system configuration is used to set a restriction on audio bandwidth?
A. region
B. location
C. physical location
D. licensing
Answer: B
Q4. Which device is used to connect to the H.323 gatekeeper?
A. H.323 gateway
B. SIP trunk
C. H.323 trunk
D. MGCP gateway
Answer: C
Q5. Refer to the exhibit.
The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number.
Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit.
Which partition should be configured in the AAR CSS applied at the phones?
A. PSTN partition
B. LD partition
C. The HQ AAR CSS must include a partition assigned to route pattern 91408XXXXXXX. The BR1 AAR CSS must include a partition assigned to route pattern 91650XXXXXXX.
D. AAR CSS must contain translation pattern 9.1[2-9]XX[2-9]XXXXXX for each site that must be globalized. Otherwise the called numbers will not be localized at the egress gateway.
Answer: A
Q6. Which option is a benefit of implementing CFUR?
A. CFUR is designed to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
Q7. Which three configuration settings are included in a default region configuration? (Choose three.)
A. Audio Codec
B. Video Call Bandwidth
C. Link Loss Type
D. Location Description
E. Immersive Bandwidth
F. Real Time Protocol
Answer: A,B,C
Q8. What are the two tasks that you must perform to configure the Service Advertisement Framework forwarder in Cisco Unified Communications Manager? (Choose two.)
A. create VPN groups
B. create VPN profiles
C. create a new Service Advertisement Framework security profile
D. set feature configuration parameters of Call Control Discovery
E. configure Service Advertisement Framework forwarder information
F. enable enterprise parameter for Service Advertisement Framework forwarder
Answer: C,E
Q9. Refer to the exhibit.
What must be configured on the HQ Cisco Unified Communications Manager to allow HQ users to dial the SAF learned directory number pattern 3XXX?
A. Route pattern 3XXX should be configured and made available to HQ users through the phone CSS.
B. Route pattern 3XXX should be configured and made available to HQ phone users through the phone AAR CSS.
C. The SAF partition assigned to the SAF learned patterns must be available to the HQ phone users through the phone CSS.
D. The SAF partition assigned to the SAF learned patterns must be available to the HQ phone users through the phone AAR CSS.
E. The SAF directory number pattern 3XXX will be made available to all users automatically as soon as the SAF partition is selected.
Answer: C
Explanation:
Incorrect Answer: A, B, D By adopting the SAF network service, the call control discovery feature allows Cisco Unified Communications Manager to advertise itself along with other key attributes. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fscallcontrol discovery.html
Q10. In a node-specific Service Advertisement Framework forwarder deployment model, what is the maximum number of Service Advertisement Framework forwarders that you can assign to a specific node?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
Answer: B
Q11. Scenario There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
DNS Servers
Device Pool
Expressway
ILS
Locations
MRA
Speed Dial
SIP Trunk
The intercluster URI call routing no longer allows calls between sites. What is the reason why this would happen? (Choose two)
A. Wrong SIP domain configured.
B. User is not associated with the device.
C. IP or DNS name resolution issue.
D. No SIP route patterns for cisco.lab exist.
Answer: C,D
Q12. Which commands are needed to configure Cisco Unified Communications Manager Express in SRST mode?
A. telephony-service and srst mode
B. telephony-service and moh
C. call-manager-fallback and srst mode
D. call-manager-fallback and voice-translation
Answer: A
Q13. Which two options must be selected in the SIP Trunk Security Profile configuration between Cisco Unified Communications Manager and Expressway? (Choose two)
A. Enable application-level authorization
B. Accept presence subscription
C. Accept out-of-dialog refer
D. Accept unsolicited notification
E. Accept replaces header
F. Transmit security status
G. Allow charging header
Answer: D,E
Q14. Refer to the exhibit.
Assume a centralized Cisco Unified Communications deployment with the headquarters in the U.K, and remote site in RTP. All route patterns are assigned a route list that points to the local route group. Local route groups have been configured on the U.K and RTP device pools. A U.K. user logs onto an RTP phone using the Cisco Extension Mobility feature and places an emergency call to 0000. Which statement about the emergency call is true?
A. The call will match the U.K_Emergency route pattern partition and will egress at the RTP gateway.
B. The call will match the U.K_Emergency route pattern partition and will egress at the U.K. gateway.
C. The call will match the RTP_Emergency route pattern partition and will egress at the U.K. gateway.
D. The call will match the RTP_Emergency route pattern partition and will egress at the RTP gateway.
E. The call will fail.
Answer: A
Q15. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
SX20 System Information
DX650 Configuration
MRGL
DP
Locations
AARG
CSS
Movi Failure
Movi Settings
Which device configuration option will allow an administrator to assign a device to specific rights for making calls to specific DNs?
A. Media Resource Group List
B. Device Pool
C. Location
D. AAR Group
E. Calling Search Space
Answer: E
Explanation:
A partition comprises a logical grouping of directory numbers (DNs) and route patterns with similar reachability characteristics. Devices that are typically placed in partitions include DNs and route patterns. These entities associate with DNs that users dial. For simplicity, partition names usually reflect their characteristics, such as "NYLongDistancePT," "NY911PT," and so on. A calling search space comprises an ordered list of partitions that users can look at before users are allowed to place a call. Calling search spaces determine the partitions that calling devices, including IP phones, softphones, and gateways, can search when attempting to complete a call.