We provide real 300 075 dump exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco cisco 300 075 Exam quickly & easily. The 300 075 pdf PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco 300 075 ciptv2 dumps pdf and vce product and material, you can easily pass the cisco 300 075 exam.

P.S. Downloadable 300-075 vce are available on Google Drive, GET MORE: https://drive.google.com/open?id=1bVtYHQM9JRfrQGNFo3XwqAc50bhY6eCv


New Cisco 300-075 Exam Dumps Collection (Question 5 - Question 14)

Q1. Which two statements describe RSVP-enabled locations-based CAC? (Choose two.)

A. RSVP can be enabled selectively between pairs of locations.

B. Using RSVP for CAC simply allows admitting or denying calls based on a logical configuration that is ignoring the physical topology.

C. RSVP is topology aware, but only works with full mesh networks.

D. An RSVP agent is a Media Termination Point that the call has to flow through.

E. RSVP and RTP are used between the two endpoints.

Answer: A,D

Explanation: Incorrect: BC

The RSVP policy that is configured for a location pair overrides the default interlocation RSVP policy that configure in the Service Parameter Configuration window. RSVP supports audio, video, and data pass-through. Video data pass-through allows video and data packets to flow through RSVP agent and media termination point devices

Link:

https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.ht ml#wp1070214


Q2. When implementing a dial plan for multisite deployments, what must be present for SRST to work successfully?

A. dial peers that address all sites in the multisite cluster

B. translation patterns that apply to the local PSTN for each gateway

C. incoming and outgoing COR lists

D. configuration of the gateway as an MGCP gateway

Answer: B


Q3. Video calls using 384 kbps need to be supported across a gatekeeper-controlled trunk. What value should be entered into the gatekeeper to support this bandwidth? (SourcE. Configuring Cisco Unified Video Advantage)

A. 768 kbps

B. 384 kbps

C. 512 kbps

D. 192 kbps

Answer: B

Explanation: Incorrect answer : ACD

Explanation : A 384-kb/s video call may comprise G.711 at 64 kb/s (for audio) plus 320 kb/s (for video). This sum does not include overhead. If the audio codec for a video call is G.729

(at 24 kb/s), the video rate increases to maintain a total bandwidth of 384 kb/s. Link:

http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08video.html#wp1059726


Q4. As a voice operations engineer, you need to standardize the firmware loads on a Cisco Unified Communications Manager cluster. You need to ensure that all the IP phones are loaded with device defaults load information. Which two locations can you verify to find the IP phones that have their firmware mismatched? (Choose two.)

A. Cisco Unified OS Administration > Software Upgrades > TFTP File Management

B. Cisco Unified CM Administration > Firmware Load Information

C. Cisco Unified CM Administration > Device > Phone

D. Cisco Unified OS Administration > Settings > Version

E. Cisco Unified CM Administration > Device Defaults Configuration

F. Cisco Unified Reporting > System Reports

Answer: B,F


Q5. Cisco Unified Communications Manager is configured with CAC for a maximum of 10 voice calls.

Which action routes the 11th call through the PSTN?

A. Configure an SIP trunk to the ISR.

B. Configure Cisco Unified Communications Manager AAR.

C. Configure Cisco Unified Communications Manager RSVP-enabled locations.

D. Configure Cisco Unified Communications Manager locations.

Answer: B


Q6. Cisco Unified border element is configured to support RSVP-based CAC. When is the RSVP path and reservation message sent and received?

A. Immediately after the call setup message is received and the reservation message is received after H.245 capabilities negotiation is completed.

B. The path and reservation messages are sent and received after the H.245 capabilities negotiation is completed.

C. The path and reservation messages are sent and received immediately after the call setup message is received.

D. The path is setup once the global command call rsvp-sync is configured.

Answer: C


Q7. When an incoming PSTN call arrives at an H.323 gateway, how does the calling number get normalized to a global E.164 number with + prefix in Cisco Unified Communications Manager?

A. Normalization is done using translation patterns.

B. Normalization is done using route patterns.

C. Normalization is done using the gateway incoming called party prefixes based on number type.

D. Normalization is done using the gateway incoming calling party prefixes based on number type.

E. Normalization is achieved by local route group that is assigned to the H.323 gateway.

Answer: D


Q8. When Cisco Extension Mobility is implemented, which CSS is used for calling privileges?

A. The user device profile line CSS combined with the device CSS of the physical phone used to log in the extension mobility user.

B. The user device profile device CSS combined with the line CSS of the physical phone used to log in the extension mobility user.

C. Only the user device profile device CSS is used.

D. The combined line/device CSS of the physical phone is used to log in the extension mobility user.

E. The combined line/device CSS of the user device profile.

Answer: A


Q9. You are entering the description for the Service Advertisement Framework forwarder. Which three characters should you avoid entering in the description? (Choose three.)

A. < >

B. &

C. %

D. #

E. $

F. @

Answer: A,B,C


Q10. Refer to the exhibit. Assume that the HQ phones have access to the HQ partition, and BR phones have access to the BR partition. Which set of implementations would best address the overlapping directory number extensions for intersite (WAN) calling between the HQ site and the BR site?

A. Configure a route pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Configure the called party DDI of Predot.

Configure a route pattern for site BR 8111.[1-3]XXX, and assign it to partition BR. Configure called party DDI Predot.

Use the local gateway at each site. Prefix the appropriate site code for the calling number.

B. Configure a single route pattern for both sites 8[12,12,12].[1-32]XXX. Use a route list that contains the local route group for each site. Prefix the appropriate site code for the calling number.

C. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.

Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.

For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number.

D. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.

Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.

For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number.

Answer: C


P.S. Easily pass 300-075 Exam with Thedumpscentre Downloadable Dumps & pdf vce, Try Free: http://www.thedumpscentre.com/300-075-dumps/ (420 New Questions)