Want to know Certleader 300 075 vce Exam practice test features? Want to lear more about Cisco CIPTV2 Implementing Cisco IP Telephony and Video, Part 2 certification experience? Study Approved Cisco 300 075 ciptv2 answers to Improved cisco 300 075 questions at Certleader. Gat a success with an absolute guarantee to pass Cisco 300 075 ciptv2 (CIPTV2 Implementing Cisco IP Telephony and Video, Part 2) test on your first attempt.

P.S. Approved 300-075 testing material are available on Google Drive, GET MORE: https://drive.google.com/open?id=1wjr6WINeoF1GfJJTEUwbsPxy_oz_OK6s


New Cisco 300-075 Exam Dumps Collection (Question 4 - Question 13)

Q1. What is a prerequisite of AAR deployment?

A. You must have a single distributed call processing deployment.

B. Calls must be manually rerouted through the PSTN or other networks when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth.

C. Calls must be automatically rerouted through the PSTN or other networks when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth.

D. Clustering must be implemented over the WAN.

E. You must have a centralized call processing deployment.

Answer: E


Q2. Refer to the exhibit.

A PSTN call arrived at the MGCP gateway. The calling number was received as 14087071222 with number set to type international. The HQ_clng pty_CSS contains the HQ_clng_pty Pt partition. Which caller ID is displayed on the IP phone?

A. +087071222

B. 14087071222

C. 087071222

D. 4087071222

E. 14087071222

Answer: C

Explanation: Incorrect: ABDE

SIP trunks and MGCP gateways can support sending the international escape character, +, for calls. H.323 gateways do not support the +. QSIG trunks do not attempt to send the +. For outgoing calls through a gateway that supports +, Cisco Unified Communications Manager can send the + with the dialed digits to the gateway. For outgoing calls through a gateway that does not support +, the gateway strips the + when Cisco Unified Communications Manager sends the call information to the gateway.

Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmfeat/fscallpn.html


Q3. Refer to the exhibit. With the Mobile Connect feature configured, when the PSTN phone calls the Enterprise user at extension 3001, the Enterprise user's mobile phone does not ring. Which CSS is responsible for ensuring that the correct partitions are accessed when calls are sent to the Enterprise user's mobile phone?

A. the gateway CSS

B. the Phone Device CSS

C. the Remote Destination Profile CSS

D. the Remote Destination Profile Rerouting CSS

E. the Phone Line (DN)CSS

Answer: D

Explanation: Incorrect: ABCE

Ensure that the gateway that is configured for routing mobile calls is assigned to the partition that belongs to the Rerouting Calling Search Space. Cisco Unified Communications Manager determines how to route calls based on the remote destination number and the Rerouting Calling Search Space.

Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmfeat/fsmobmgr.html


Q4. What impact do roaming-sensitive settings and Device Mobility settings have on call routing?

A. Device Mobility settings have no impact on call routing, but roaming-sensitive settings modify the AAR group, AAR CSS, and device CSS.

B. Device Mobility settings modify the device CSS and the roaming-sensitive settings modify the AAR group and AAR CSS.

C. Device Mobility settings modify the AAR group and the AAR CSS, the roaming-sensitive settings modify the device CSS.

D. Roaming-sensitive settings are settings that do not have an impact on call routing. Device Mobility settings, on the other hand, may have an impact on call routing because they modify the device CSS, AAR group, and AAR CSS.

Answer: D


Q5. Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones?

A. Configure the branch office IP phones with CSS and partitions.

B. Configure the branch office IP phones with MRGs and MRGLs.

C. Configure the branch office IP phones with regions.

D. Configure the branch office IP phones with locations.

Answer: B


Q6. Which two options enable routers to provide basic call handling support for Cisco Unified IP Phones if they lose connection to all Cisco Unified Communications Manager systems? (Choose two.)

A. SCCP fallback

B. Cisco Unified Survivable Remote Site Telephony

C. Cisco Unified Communications Manager Express

D. MGCP fallback

E. Cisco Unified Communications Manager Express in SRST mode

Answer: B,E


Q7. Refer to the exhibit.

Which trunks would be most suitable for Connection Y?

A. an H.225 trunk (gatekeeper-controlled)

B. intercluster trunk (gatekeeper-controlled)

C. a SIP trunk on the U.S. cluster and an intercluster trunk on the remote cluster

D. intercluster trunk (nongatekeeper-controlled)

E. No extra connections are required. As long as IP connectivity exists, you need only configure a route pattern for each site. The Cisco Unified Communications Manager will automatically forward the calls over the WAN if the destination directory number is not registered locally.

Answer: D


Q8. Refer to the exhibit.

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit.

What should the AAR group prefix be?

A. 9

B. 91

C. none

D. +

E. +1

Answer: C


Q9. Which statement about Service Advertisement Framework is true?

A. SAF requires that the EIGRP be configured on all routers, including non-SAF routers.

B. SAF requires that the EIGRP be configured only on SAF routers. Non-SAF routers act as an IP cloud.

C. SAF has no dependency on the underlying routing protocol, as long as it is a dynamic routing protocol. Static routes are not supported.

D. SAF operates on any dynamic or static IP routing configuration. SAF is totally independent of the underlying routing protocol.

Answer: D

Explanation:

Because Cisco SAF is independent of IP routing and uses underlying Cisco routing technology to distribute service advertisements in a reliable and efficient manner, Cisco SAF will run in networks over any routing protocol they may have in place such as Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First (OSPF), Exterior Border Gateway Protocol (EBGP) over an MPLS service, or static routing (Figure 2).

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6554/ps6599/ps10822/whitepaper_c11-636604.html


Q10. Refer to the exhibit.

What media resource should be configured in Cisco Unified Communications Manager?

A. Cisco Media Termination Point Hardware

B. Cisco IOS Enhanced Media Termination Point Cisco

C. Cisco IOS Media Termination Point

D. Cisco Media Termination Point Hardware (WS-SVC-CMM)

Answer: B

Explanation: Incorrect: ACD

Each media termination point receives a list of Cisco Unified Communications Managers, in priority order, to which it should attempt to register. Each media termination point can register with only one Cisco Unified Communications Manager at a time.

Link: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080b4f916.shtml


P.S. Easily pass 300-075 Exam with 2passeasy Approved Dumps & pdf vce, Try Free: https://www.2passeasy.com/dumps/300-075/ (245 New Questions)