Cause all that matters here is passing the Cisco 300-207 exam. Cause all that you need is a high score of 300-207 Implementing Cisco Threat Control Solutions (SITCS) exam. The only one thing you need to do is downloading Pass4sure 300-207 exam study guides now. We will not let you down with our money-back guarantee.
Q1. Which sensor deployment mode does Cisco recommend when interface capacity is limited and you need to increase sensor functionality?
A. inline interface pair mode
B. inline VLAN pair mode
C. inline VLAN group mode
D. VLAN group mode
Answer: C
Q2. Which two statements regarding the basic setup of the Cisco CX for services are correct? (Choose two.)
A. The Packet capture feature is available for either permitted or dropped packets by default.
B. Public Certificates can be used for HTTPS Decryption policies.
C. Public Certificates cannot be used for HTTPS Decryption policies.
D. When adding a standard LDAP realm, the group attribute will be UniqueMember.
E. The Packet capture features is available for permitted packets by default.
Answer: C,E
Q3. Which Cisco technology is a customizable web-based alerting service designed to report threats and vulnerabilities?
A. Cisco Security Intelligence Operations
B. Cisco Security IntelliShield Alert Manager Service
C. Cisco Security Optimization Service
D. Cisco Software Application Support Service
Answer: B
Q4. The Web Cache Communication Protocol (WCCP) is a content-routing protocol that can facilitate the redirection of traffic flows in real time. Your organization has deployed WCCP to redirect web traffic that traverses their Cisco Adaptive Security Appliances (ASAs) to their Cisco Web Security Appliances (WSAs).
The simulator will provide access to the graphical user interfaces of one Cisco ASA and one Cisco WSA that are participating in a WCCP service. Not all aspects of the GUIs are implemented in the simulator. The options that have been implemented are sufficient to determine the best answer to each of the questions that are presented.
Your task is to examine the details available in the simulated graphical user interfaces and select the best answer.
Between the Cisco ASA configuration and the Cisco WSA configuration, what is true with respect to redirected ports?
A. Both are configured for port 80 only.
B. Both are configured for port 443 only.
C. Both are configured for both port 80 and 443.
D. Both are configured for ports 80, 443 and 3128.
E. There is a configuration mismatch on redirected ports.
Answer: C
Explanation: This can be seen from the WSA Network tab shown below:
\\psf\Home\Desktop\Screen Shot 2015-01-27 at 9.42.49 AM.png
Q5. Which command disables SSH access for administrators on the Cisco ESA?
A. interfaceconfig
B. sshconfig
C. sslconfig
D. systemsetup
Answer: A
Q6. What is a primary difference between the web security features of the Cisco WSA and the Cisco ASA NGFW?
A. Cisco WSA provides URL filtering, while Cisco ASA NGFW does not.
B. Cisco ASA NGFW provides caching services, while Cisco WSA does not.
C. Cisco WSA provides web reputation filtering, while Cisco ASA NGFW does not.
D. Cisco ASA NGFW provides application visibility and control on all ports, while Cisco WSA does not.
Answer: D
Q7. An ASA with an IPS module must be configured to drop traffic matching IPS signatures and block all traffic if the module fails. Which describes the correct configuration?
A. Inline Mode, Permit Traffic
B. Inline Mode, Close Traffic
C. Promiscuous Mode, Permit Traffic
D. Promiscuous Mode, Close Traffic
Answer: B
Q8. Which three functions can Cisco Application Visibility and Control perform within Cisco Cloud Web Security? (Choose three.)
A. validation of malicious traffic
B. traffic control
C. extending Web Security to all computing devices
D. application-level classification
E. monitoring
F. signature tuning
Answer: B,D,E
Q9. Which three options are IPS signature classifications? (Choose three.)
A. tuned signatures
B. response signatures
C. default signatures
D. custom signatures
E. preloaded signatures
F. designated signatures
Answer: A,C,D
Q10. Which three zones are used for anomaly detection? (Choose three.)
A. Internal zone
B. External zone
C. Illegal zone
D. Inside zone
E. Outside zone
F. DMZ zone
Answer: A,B,C
Q11. To what extent will the Cisco IPS sensor contribute data to the Cisco SensorBase network?
A. It will not contribute to the SensorBase network.
B. It will contribute to the SensorBase network, but will withhold some sensitive information
C. It will contribute the victim IP address and port to the SensorBase network.
D. It will not contribute to Risk Rating adjustments that use information from the SensorBase network.
Answer: B
Explanation:
To configure network participation, follow these steps:.Step 1.Log in to IDM using an account with administrator privileges..Step 2.Choose Configuration > Policies > Global Correlation > Network Participation..Step 3.To turn on network participation, click the Partial or Full radio button:..Partial—Data is contributed to the SensorBase Network, but data considered potentially sensitive is filtered out and never sent...Full—All data is contributed to the SensorBase Network
In this case, we can see that this has been turned off as shown below:
Q12. Which Cisco WSA is intended for deployment in organizations of more than 6000 users?
A. WSA S370
B. WSA S670
C. WSA S370-2RU
D. WSA S170
Answer: B
Q13. What CLI command configures IP-based access to restrict GUI and CLI access to a Cisco Email Security appliance's administrative interface?
A. adminaccessconfig
B. sshconfig
C. sslconfig
D. ipaccessconfig
Answer: A
Q14. The Web Cache Communication Protocol (WCCP) is a content-routing protocol that can facilitate the redirection of traffic flows in real time. Your organization has deployed WCCP to redirect web traffic that traverses their Cisco Adaptive Security Appliances (ASAs) to their Cisco Web Security Appliances (WSAs).
The simulator will provide access to the graphical user interfaces of one Cisco ASA and one Cisco WSA that are participating in a WCCP service. Not all aspects of the GUIs are implemented in the simulator. The options that have been implemented are sufficient to determine the best answer to each of the questions that are presented.
Your task is to examine the details available in the simulated graphical user interfaces and select the best answer.
How many Cisco ASAs and how many Cisco WSAs are participating in the WCCP service?
A. One Cisco ASA or two Cisco ASAs configured as an Active/Standby failover pair, and one Cisco WSA.
B. One Cisco ASA or two Cisco ASAs configured as an Active/Active failover pair, and one Cisco WSA.
C. One Cisco ASA or two Cisco ASAs configured as an Active/Standby failover pair, and two Cisco WSAs.
D. One Cisco ASA or two Cisco ASAs configured as an Active/Active failover pair, and two Cisco WSAs.
E. Two Cisco ASAs and one Cisco WSA.
F. Two Cisco ASAs and two Cisco WSAs.
Answer: A
Explanation:
We can see from the output that the number of routers (ASA’s) is 1, so there is a single ASA or an active/ standby pair being used, and 1 Cache Engine. If the ASA’s were in a active/active role it would show up as 2 routers.
Q15. Which IPS signature regular expression CLI command matches a host issuing a domain lookup for www.theblock.com?
A. regex-string (\x03[Tt][Hh][Ee]\x05[Bb][Ll][Oo][Cc][Kk])
B. regex-string (\x0b[theblock.com])
C. regex-string (\x03[the]\x05[block]0x3[com])
D. regex-string (\x03[T][H][E]\x05[B][L][O][C][K]\x03[.][C][O][M]
Answer: A
Q16. In which way are packets handled when the IPS internal zone is set to "disabled"?
A. All packets are dropped to the external zone.
B. All packets are dropped to the internal zone.
C. All packets are ignored in the internal zone.
D. All packets are sent to the default external zone.
Answer: D