Want to know Exambible 352-001 Exam practice test features? Want to lear more about Cisco CCDE Written Exam certification experience? Study Free Cisco 352-001 answers to Renewal 352-001 questions at Exambible. Gat a success with an absolute guarantee to pass Cisco 352-001 (CCDE Written Exam) test on your first attempt.
2021 Apr 352-001 exam price
Q101. A switched network is being designed to support a manufacturing factory. Due to cost constraints, fiber-based connectivity is not an option. Which design allows for a stable network when there is a risk of interference from the manufacturing hardware in use on the factory floor?
A. Design the network to include UDLD to detect unidirectional links and take them out of service.
B. Design the network to include EtherChannel bundles to prevent a single-link failure from taking down a switch interconnection point.
C. Design the network to include loop guard to prevent a loop in the switched network when a link has too much interference.
D. Design the network to include BackboneFast on all devices to accelerate failure convergence times.
Answer: A
Q102. Your design plan includes mutual redistribution of two OSPF networks at multiple locations, with connectivity to all locations in both networks. How is this accomplished without creating routing loops?
A. Use route maps on the ASBRs to allow only internal routes to be redistributed.
B. Use route maps on the ASBRs to allow internal and external routes to be redistributed.
C. Use route maps on the ASBRs to set tags for redistributed routes.
D. Use route maps on the ASBRs to filter routes with tags so they are not redistributed.
Answer: D
Q103. AS100 and AS200 each have two peering points in different parts of their network. AS100 would like to use one of the links and keep the other link as backup. What should be changed for the design inside AS100 for prefixes received from AS200?
A. MED
B. weight
C. AS-PATH
D. local preference
Answer: D
Q104. A Service Provider is designing a solution for a managed CE service to a number of local customers using a single CE platform and wants to have logical separation on the CE platform using Virtual Routing and Forwarding (VRF) based on IP address ranges or packet length. Which is the most scalable solution to provide this type of VRF Selection process on the CE edge device?
A. Static Routes for Route Leaking
B. Policy Based Routing
C. Multi-Protocol BGP
D. OSPF per VRF Instance
Answer: B
Q105. What is a key role for the access layer in a hierarchical network design?
A. The access layer provides a security, QoS, and policy trust boundary.
B. The access layer provides an aggregation point for services and applications.
C. The access layer serves as a distribution point for services and applications.
D. The access layer can be used to aggregate remote users.
Answer: A
Improved 352-001 exams:
Q106. After the recent implementation of a new design that incorporated GRE tunnels into the network, the network operations staff is seeing the following syslog message in multiple routers on the network - %TUN-5-RECURDOWN: Tunnel0 temporarily disabled due to recursive routing.
From a design perspective, what was not taken into account prior to implementing the solution?
A. The neighboring routers cannot respond within the specified hold time.
B. The interface on the router that is the source of the tunnel is down.
C. The interface on the neighboring router that is the source of the tunnel is down.
D. The router is learning the route to the tunnel destination address using the tunnel interface.
E. The tunnel interface on the router is not receiving any keepalives within the specified hold time.
Answer: D
Q107. Refer to the exhibit.
Your junior design engineer presents this configuration design. What is the next-hop router for CE3, and why?
A. CE1. BGP weight is higher than CE2.
B. CE2. EBGP administrative distance is lower than RIP.
C. CE2. The link between CE2 and PE1 has more bandwidth than CE1-to-PE1.
D. CE1. HSRP on CE1 is in active state.
Answer: D
Q108. You are designing a Group Encrypted Transport virtual private network solution for an existing branch network. The existing network has the following characteristics:
. 50 remote sites (with an additional 30 remote sites expected over the next 3 years) . Connectivity between all sites is via Multiprotocol Label Switching Layer 3 virtual private network service from a single provider . Open Shortest Path First is the routing protocol used between provider edge and customer edge routers . The customer edge routers will become group members performing the encryption between sites
Which additional routing protocol would you use for the overlay routing between the group members?
A. Open Shortest Path First (with a different process ID)
B. Enhanced Interior Gateway Routing Protocol
C. No additional protocol is necessary.
D. External Border Gateway Protocol
E. Routing Information Protocol Version 2
F. Next Hop Resolution Protocol
Answer: C
Q109. You have been tasked with designing a data center interconnect to provide business continuity. You want to encrypt the traffic over the DCI using IEEE 802.1AE MACsec to prevent the deployment of any firewall or IPS. Which two interconnect technologies support MACsec? (Choose two.)
A. EoMPLS
B. MPLS Layer 3 VPN
C. DMVPN
D. OTV
E. VPLS
F. GET VPN
Answer: AE
Q110. You are designing a network that will run EIGRP over a Metro Ethernet service that does not employ a link-loss technology. What will be the impact on convergence if there is a break in the end-to-end Layer 2 connectivity within the service provider network?
A. The routers will immediately lose their adjacencies and converge.
B. The routing protocol will not converge until the hold timers have expired.
C. The switch ports connected to the router will go down and the routers will immediately converge.
D. The VLAN on the switches will go inactive, the ports associated on the switch will go down, and the routers will immediately converge.
Answer: B