Cause all that matters here is passing the Cisco 642-999 exam. Cause all that you need is a high score of 642-999 Implementing Cisco Data Center Unified Computing (DCUCI) exam. The only one thing you need to do is downloading Pass4sure 642-999 exam study guides now. We will not let you down with our money-back guarantee.
Q22. Which protocol is not supported for Cisco UCS backups and imports?
A. FTP
B. TFTP
C. SCP
D. SFTP
E. HTTP
Answer: E
Q23. When cabling a Cisco UCS 6200 Series Fabric Interconnect to disjoint Layer 2 networks, which option must be considered?
A. The fabric interconnect must be in switching mode.
B. You must first configure a LAN pin group.
C. Each VLAN is allowed across multiple disjoint uplinks.
D. Each vNIC can communicate to a single disjoint network.
Answer: D
Q24. What are the default settings of the Cisco IMCCIMC NIC properties on a standalone Cisco UCS C-Series server?
A. 'Shared LOM' NIC mode with 'Active-active' NIC redundancy and DHCP enabled
B. 'Shared LOM' NIC mode with 'Active-standby' NIC redundancy and DHCP enabled
C. 'Dedicated' NIC mode with 'Active-standby' NIC redundancy DHCP disabled
D. 'Dedicated' NIC mode with 'None' NIC redundancy and DHCP enabled
E. 'Cisco Card' NIC mode with 'Active-active' NIC redundancy and DHCP enabled
Answer: D
Q25. Which options are valid port types when configuring fixed 10-Gb LAN interfaces on the Cisco UCS 6200 Series Fabric Interconnects? (Choose three.)
A. monitoring port
B. server port
C. uplink Ethernet port
D. FEX port
E. Fibre Channel storage port
Answer: ABC
Q26. Which two are true with respect to the switching modes on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.)
A. End-host mode presents a link to a northbound uplink switch as a host trunk with loop detection that is provided by STP.
B. For northbound traffic, server MAC addresses are statically pinned to an uplink; the return path is controlled by the unified fabric switches.
C. A fabric interconnect port in Ethernet switching mode appears to the uplink switch as a host with many MAC addresses.
D. Server-to-server traffic on a common VLAN are locally switched by the fabric interconnect and not the northbound switches.
E. A MAC forwarding table is not used to forward traffic to the uplink switch.
F. A MAC address forwarding table is maintained for server-to-server communications across VLANs.
Answer: DE
Q27. Which item describes the failure scenario called a "split-brain" in the Cisco Unified Computing System?
A. failure of the Cisco Unified Computing System L1-L2 network
B. failure of a Cisco Unified Computing System Chassis Management Controller
C. failure of a Cisco Unified Computing System I/O module
D. failure of a Cisco Unified Computing System Fabric Interconnect
E. failure of a Cisco Unified Computing System Chassis Management Switch
Answer: A
Q28. Which three items represent some of the features that can be defined in a Cisco Unified Computing System Manager port profile? (Choose three.)
A. QoS policy
B. ACL
C. NetFlow
D. port security
E. network control policy
F. VLAN or VLANs
Answer: AEF
Q29. Which two VMware features will not allow an adapter to transition from Cisco VM-FEX standard mode to universal passthrough mode? (Choose two.)
A. VM Snapshot
B. Volume Shadow Copy
C. Storage vMotion
D. HA
E. Resource Reservations
Answer: AC
Q30. Which two items can you provision in a vHBA Template? (Choose two.)
A. Max Data Field Size
B. SCSI I/O Queues
C. FCoE VLAN
D. vHBA Interrupt Mode
E. Stats Threshold Policy
F. FLOGI Timeout
Answer: AE
Q31. Which BIOS setting is required for a VMware ESXi 5.0 host to support Cisco VM-FEX universal pasthrough mode?
A. VT for Directed IO
B. ACPI 10 Support
C. VEMDPA Agent
D. Execute Disabled Bit
E. Processor C State
Answer: A
Q32. Which of the following is true concerning the Global Chassis Discovery policy configuration on the Cisco Unified Computing System Manager when using Cisco Unified Computing System 22XX I/O modules with Cisco UCS 62XX Fabric Interconnects?
A. The link grouping preference should be set to discrete mode when the number of northbound links are not a power of 2.
B. Set the action policy-count higher than the actual number of uplinks; otherwise, the Cisco Unified Computing System servers will not be discovered.
C. For Cisco Unified Computing System implementations that mix I/O modules with different numbers of links, it is best to manually reacknowledge the chassis in order to use all available links.
D. Automatic reacknowledgement due to chassis discovery is never disruptive.
Answer: C
Q33. Which three items represent some of the components to implement Cisco VM-FEX for Cisco Unified Computing System Manager B-Series blades? (Choose three.)
A. Cisco VSM VM
B. VEM installed on the VMware vCenter server
C. VEM in the VMware ESX or ESXi host
D. Cisco Unified Computing System Manager version 1.2 or higher
E. VMware vCenter server
F. Fibre Channel VMFS volume
Answer: CDE
Q34. Which UCS components firmware are contained in the UCS Infrastructure software bundle?
A. UCS BIOS
B. UCS Fabric Interconnects
C. UCS Adapters
D. UCS Manager
E. IO Module
F. Cisco IMC
Answer: BDE
Q35. Which two are true with respect to the upgrade process for the Cisco Unified Computing System? (Choose two.)
A. For easier manageability, Cisco provides one full bundle that contains the firmware images for all Cisco Unified Computing System components.
B. You can choose from FTP, TFTP, SCP, and HTTP to copy the bundle image from a remote file system.
C. When the bundle image is downloaded, it must be transferred to the flash file system of the active fabric interconnect.
D. When the download is successful, Cisco Unified Computing System Manager expands the individual files from the archive and installs them in the correct flash file system partition.
E. It is strongly recommended that you activate all components in all chassis at one time.
F. The I/O module, CIMC, and adaptors update process operates strictly on the backup partition of Flash for a given component.
Answer: CF
Q36. Which item represents a secure method of transmitting fault data with Cisco Call Home?
A. IPsec
B. SSL email
C. secure XML
D. Cisco Transport Gateway
E. RSA Digital Certificate
Answer: D
Q37. You have a Cisco UCS B200 M2 server configured with 12 4-GB DDR3 1333-MHz dual-voltage memory DIMMs. You learned that the server memory speed is running at 1066 MHz instead. How can you configure the server to run at maximum memory speed?
A. You cannot configure memory speed of 1333 MHz. The maximum memory speed of a Cisco UCS B200 M2 server with 12 4-GB DIMM is 1066 MHz.
B. Memory speed of the ESX host is configurable on VMware vCenter.
C. Create a BIOS policy. In the RAS Memory BIOS settings, select Performance Mode for LV DDR Mode.
D. On the CIMC of the Cisco UCS B200 M2, select 1333 MHz in the Memory Speed option.
Answer: C
Q38. Which three options are true regarding port profiles in Cisco UCS Manager? (Choose three.)
A. Port profiles define operating-system kernel parameters.
B. Port profiles are represented as a port group in vCenter.
C. Port profiles can be used by more than one DVS.
D. Port profile parameters are visible on vCenter.
E. Port profile parameters can be modified from vCenter.
F. Port profiles can be modified only from Cisco UCS Manager.
Answer: BCF
Q39. How many certificates does Cisco Unified Computing System Manager have to export to communicate with VMware vCenter server if the VMware ESXi hosts are all running version 5.0 or higher?
A. 1
B. 2
C. 4
D. 8
E. 16
Answer: A
Q40. In which situation would you be required to change a Cisco UCS system from end-host mode to switching mode?
A. Design requirements call for the use of fabric failover.
B. Fabric interconnect is connecting to disjoint Layer 2 networks upstream.
C. HSRP routers are directly connected to the fabric interconnect.
D. Upstream Cisco Nexus 5000 is configured for vPC.
Answer: C
Q41. What is the maximum number of ports on a VMware vCenter Distributed Virtual Switch?
A. 64
B. 128
C. 1024
D. 4096
E. 8192
Answer: D
Q42. Which two elements are defined in a dynamic vNIC connection policy? (Choose two.)
A. adapter policy
B. QoS policy
C. network control policy
D. number of dynamic vNICs
E. jumbo frame size
Answer: AD