It can be excellent in the event people get 70-410 schooling directly from Microsoft Higher education. Contenders could grow in experience and knowledge inside Microsoft University since masters/ industry experts will give you schooling towards the people. Before you take Microsoft 70-410 tests, the particular most important point which the people are related will be to know of the 70-410 test syllabus and will encourage them to to secure a very clear experience in mastering the particular 70-410 training. Every one of the 70-410 test facts and various information and facts are offered instantly while in the Microsoft webpage.
2021 Feb 70-410 test question
Q31. - (Topic 2)
Your network contains an Active Directory domain named contoso.com.
An organizational unit (OU) named OU1 contains the computer accounts for laptops and
desktop computers.
A Group Policy object (GPO) named GP1 is linked to OU1.
You need to ensure that the configuration settings in GP1 are applied only to a user named
User1.
What should you do?
A. Modify the security settings of OU1.
B. Modify the GPO Status of GP1.
C. Modify the security settings of GP1.
D. Configure the WMI Filter of GP1.
Answer: C
Explanation:
References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 10: Implementing Group Policy, p. 470, 482 http://technet.microsoft.com/en-us/library/jj134176 WMI filtering using GPMC
Q32. - (Topic 3)
Your network contains multiple subnets.
On one of the subnets, you deploy a server named Server1 that runs Windows Server 2012 R2.
You install the DNS Server server role on Server1, and then you create a standard primary zone named contoso.com.
You need to ensure that client computers can resolve IP addresses to host names.
What should you do first?
A. Create a GlobalNames zone.
B. Convert the contoso.com zone to an Active Directory-integrated zone.
C. Configure dynamic updates for contoso.com.
D. Create a reverse lookup zone.
Answer: D
Explanation:
Use a reverse lookup zone to be able to resolve IP addresses to host names.
Q33. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2008 R2 installed.
Most of the Contoso.com servers have 64 – bit CPU’s installed, while the rest have 32 – bit CPU’s installed. You are informed that Contoso.com wants to deploy Windows Server 2012 R2 on all their servers.
You need to make recommendations to ensure that this is possible.
Which of the following would you recommend?
A. You should inform Contoso.com that the deployment can proceed without any changes.
B. You should inform Contoso.com that the servers with 32 bit CPU’s must be upgraded to include 64 bit CPU’s for the deployment to proceed.
C. You should inform Contoso.com that the servers with 64 bit CPU’s must be upgraded to include 32 bit CPU’s for the deployment to proceed.
D. You should inform Contoso.com that the deployment is not in any way possible.
Answer: B
Explanation:
Windows Server 2012 is a 64-bit only operating system. Minimum: 1.4 GHz 64-bit processor
Q34. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to create a storage pool that will contain a new volume.
You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout.
What is the minimum number of 256-GB disks required for the storage pool?
A. 2
B. 3
C. 4
D. 5
Answer: C
Explanation:
It takes 3 discs (minimum) in order to create a storage pool array with parity. If this array were using fixed provisioning, this would not be enough given the 256MB capacity (since only 2/3rds of 256 X 3 - less than 600 - could be used as actual data with the rest being parity bits), but since this array uses thin provisioning, a 600GB volume could technically be set up on a 20GB disc and it would still show as 600GB. (So, essentially, the question really becomes how many drives it takes in a storage pool to create a parity array.)
References:
http://technet.microsoft.com/en-us/library/hh831391.aspx http://www.ibeast.com/content/tools/RaidCalc/RaidCalc.asp
http://www.raid-calculator.com/default.aspx https://www.icc-usa.com/raid-calculator
Q35. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Remote Access server role installed.
A user named User1 must connect to the network remotely. The client computer of User1 requires Challenge Handshake Authentication Protocol (CHAP) for remote connections. CHAP is enabled on Server1.
You need to ensure that User1 can connect to Server1 and authenticate to the domain.
What should you do from Active Directory Users and Computers?
A. From the properties of User1, select Store password using reversible encryption.
B. From the properties of Server1, assign the Allowed to Authenticate permission to User1.
C. From the properties of User1, select Use Kerberos DES encryption types for this account.
D. From the properties of Server1, select Trust this computer for delegation to any service (Kerberos only).
Answer: A
Explanation:
The Store password using reversible encryption policy setting provides support for Applications that use protocols that require the user’s password for authentication. Storing encrypted passwords in a way that irreversible means that the encrypted passwords can be decrypted. A knowledgeable attacker who is able to break this encryption can then log on to network resources by using the compromised account. For this reason, never enable Store password using reversible encryption for all users in the domain unless Application requirements outweigh the need to protect password information. If you use the Challenge Handshake Authentication Protocol (CHAP) through remote access or Internet Authentication Services (IAS), you must enable this policy setting. CHAP is an authentication protocol that is used by remote access and network connections. Digest Authentication in Internet Information Services (IIS) also requires that you enable this policy setting. If your organization uses CHAP through remote access or IAS, or Digest Authentication in IIS, you must configure this policy setting to Enabled. This presents a security risk when you App1y the setting through Group Policy on a user-by-user basis because it requires the appropriate user account object to be opened in Active Directory Users and Computers.
Up to date 70-410 exam engine:
Q36. DRAG DROP - (Topic 3)
You have a Hyper-V host named Server1. Server1 hosts a virtual machine named VM1. You view the properties of VM1 as shown in the following exhibit. (Click the Exhibit button.)
You need to configure bandwidth management for VM1.
Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Q37. - (Topic 3)
Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table.
You need to ensure that you can use Server Manager on DC1 to manage DC2.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install Microsoft .NET Framework 4 on DC2.
B. Install Remote Server Administration Tools on DC1.
C. Install Remote Server Administration Tools on DC2.
D. Install Windows Management Framework 3.0 on DC2.
Answer: A,D
Explanation:
Windows Management Framework 3.0. To use this release of Server Manager to access and manage remote servers that are running Windows Server 2008 or Windows Server 2008 R2, you must first install .NET Framework 4.0, and then install Windows Management Framework 3.0 on those servers. Note: In Windows Server 2012 R2, you can use Server Manager to perform management tasks on remote servers. Remote management is enabled by default on servers that are running Windows Server 2012 R2. To manage a server remotely by using Server Manager, you add the server to the Server Manager server pool. You can use Server Manager to manage remote servers that are running Windows Server 2008 and Windows Server 2008 R2, but the following updates are required to fully manage these older operating systems (see above).
Reference: Configure Remote Management in Server Manager.
Q38. - (Topic 3)
Catalog Servers. Your domain structure contains one root domain and one child domain. You modify the folder permissions on a file server that is in the child domain. You discover that some Access Control entries start with S-1-5-21 and that no account name is listed.
You need to list the account names. What should you do?
A. Move the RID master role in the child domain to a domain controller that holds the Global Catalog.
B. Modify the schema to enable replication of the friendly names attribute to the Global Catalog.
C. Move the RID master role in the child domain to a domain controller that does not hold the Global Catalog.
D. Move the infrastructure master role in the child domain to a domain controller that does not hold the Global Catalog.
Answer: D
Explanation:
If the IM Flexible Single Master Operation (FSMO) role holder is also a global catalog server, the phantom indexes are never created or updated on that domain controller. (The FSMO is also known as the operations master.) This behavior occurs because a global catalog server contains a partial replica of every object in Active Directory. The IM does not store phantom versions of the foreign objects because it already has a partial replica of the object in the local global catalog.
For this process to work correctly in a multidomain environment, the infrastructure FSMO role holder cannot be a global catalog server. Be aware that the first domain in the forest holds all five FSMO roles and is also a global catalog. Therefore, you must transfer either role to another computer as soon as another domain controller is installed in the domain if you plan to have multiple domains.
Q39. - (Topic 3)
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 50 virtual machines that run Windows Server 2012 R2.
Your company uses smart cards for authentication.
You need to ensure that you can use smart card authentication when you connect to the virtual machine by using Virtual Machine Connection.
What should you configure?
A. The RemoteFX settings
B. The Enhanced Session Mode Policy
C. The NUMA Spanning settings
D. The Integration Services settings
Answer: B
Q40. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server 2012. You create a group Managed Service Account named gservice1. You need to configure a service named Service1 to run as the gservice1 account. How should you configure Service1?
A. From a command prompt, run sc.exe and specify the config parameter.
B. From Windows PowerShell,run Set-Service and specify the -PassThrough parameter
C. From Windows PowerShell,run Set-Service and specify the -StartupType parameter
D. From Services Console configure the General settings
Answer: A