Our pass rate is high to 98.9% and the similarity percentage between our braindumps 70 410 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Microsoft mcp 70 410 exam in just one try? I am currently studying for the Microsoft 70 410 questions exam. Latest Microsoft mcsa 70 410 pdf Test exam practice questions and answers, Try Microsoft examcollection 70 410 Brain Dumps First.
Q101. - (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2.
You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the
installation fails repeatedly.
You need to ensure that the feature can be installed on Server1.
What should you do?
A. Run the Add-AppxProvisionedPackage cmdlet.
B. Disable User Account Control (UAC).
C. Connect Server1 to the Internet.
D. Remove the .NET Framework 4.5 Features feature.
Answer: C
Q102. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Remote Access server role installed.
A user named User1 must connect to the network remotely. The client computer of User1 requires Challenge Handshake Authentication Protocol (CHAP) for remote connections. CHAP is enabled on Server1.
You need to ensure that User1 can connect to Server1 and authenticate to the domain.
What should you do from Active Directory Users and Computers?
A. From the properties of User1, select Store password using reversible encryption.
B. From the properties of Server1, assign the Allowed to Authenticate permission to User1.
C. From the properties of User1, select Use Kerberos DES encryption types for this account.
D. From the properties of Server1, select Trust this computer for delegation to any service (Kerberos only).
Answer: A
Explanation:
The Store password using reversible encryption policy setting provides support for Applications that use protocols that require the user’s password for authentication. Storing encrypted passwords in a way that irreversible means that the encrypted passwords can be decrypted. A knowledgeable attacker who is able to break this encryption can then log on to network resources by using the compromised account. For this reason, never enable Store password using reversible encryption for all users in the domain unless Application requirements outweigh the need to protect password information. If you use the Challenge Handshake Authentication Protocol (CHAP) through remote access or Internet Authentication Services (IAS), you must enable this policy setting. CHAP is an authentication protocol that is used by remote access and network connections. Digest Authentication in Internet Information Services (IIS) also requires that you enable this policy setting. If your organization uses CHAP through remote access or IAS, or Digest Authentication in IIS, you must configure this policy setting to Enabled. This presents a security risk when you App1y the setting through Group Policy on a user-by-user basis because it requires the appropriate user account object to be opened in Active Directory Users and Computers.
Q103. - (Topic 2)
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2
Datacenter.Server1 is located in an isolated network that cannot access the Internet.
On Server1, you install a new virtual machine named VM1.VM1 runs Windows Server 2012
R2 Essentials and connects to a private virtual network.
After 30 days, you discover that VM1 shuts down every 60 minutes.
You need to resolve the issue that causes VM1 to shut down every 60 minutes.
What should you do?
A. OnVM1, run slmgr.exe and specify the /ipk parameter.
B. OnServer1, run slmgr.exe and specify the /rearm-sku parameter.
C. Create a new internal virtual network and attach VM1 to the new virtual network.
D. On Server1, run Add-WindowsFeatureVolumeActivation.
Answer: A
Q104. HOTSPOT - (Topic 2)
Your network contains an Active Directory forest. The forest contains two domains named Domain1 and Domain2.
Domain1 contains a file server named Server1. Server1 has a shared folder named Share1.
Domain2 contains 50 users who require access to Share1.
You need to create groups in each domain to meet the following requirements:
. In Domain1, create a group named Group1. Group1 must be granted access to Share1. . In Domain2, create a group named Group2. Group2 must contain the user accounts of the 50 users. . Permission to Share1 must only be assigned directly to Group1.
Which type of groups should you create and which group nesting strategy should you use?
To answer, select the appropriate configuration in the answer area.
Answer:
Q105. - (Topic 2)
Your network contains a file server named Server1 that runs Windows Server 2012 R2.All client computers run Windows 8.
You need to ensure that when users are connected to the network, they always use local offline files that are cached from Server1.
Which Group Policy setting should you configure?
A. Configure slow-link mode.
B. Configure Slow link speed
C. Enable file synchronization on costed networks
D. Turn on economical application of Administratively assigned Offline Files.
Answer: A
Explanation:
A. Offline Files to provide faster access to cached files and redirected folders.
B. Defines a slow connection for purposes of Applying and updating Group Policy.
C. automatically tracks roaming and bandwidth usage limits while on metered connections
D. Lists network files and folders that are always available for offline use. This policy makes the specified files and folders available offline to users of the computer. When Offline Files is operating in the slow-link mode, all network file requests are satisfied from the OfflineFiles cache. This is similar to a user working offline. If you enable this policy setting, Offline Files uses the slow-link mode if the network throughput between the client and the server is below (slower than) the Throughput threshold parameter, or if the round-trip network latency is above (slower than) the Latency threshold parameter.
Q106. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the
Hyper-V server role installed.
An iSCSI SAN is available on the network.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
You create a LUN on the SAN to host the virtual hard drive files for the virtual machines.
You need to create a 3-TB virtual hard disk for VM1 on the LUN. The solution must prevent
VM1 from being paused if the LUN runs out of disk space.
Which type of virtual hard disk should you create on the LUN?
A. Dynamically expanding VHDX
B. Fixed-size VHDX
C. Fixed-size VHD
D. Dynamically expanding VHD
Answer: B
Explanation:
The virtual disk needs to be a VHDX file since it is going to be over 2TB in size and it must be fixed-size so that the space is already taken on the server (that way the server does not run out of space as the volume grows) even if the actual virtual disk does not yet hold that amount of data.
Q107. - (Topic 3)
Your network contains an Active Directory domain named contoso.com.
You have a starter Group Policy object (GPO) named GPO1 that contains more than 100
settings.
You need to create a new starter GPO based on the settings in GPO1.
You must achieve this goal by using the minimum amount of administrative effort.
What should you do?
A. Run the New-GPStarterGPO cmdlet and the Copy-GPO cmdlet.
B. Create a new starter GPO and manually configure the policy settings of the starter GPO.
C. Right-click GPO1, and then click Back Up. Create a new starter GPO. Right-click the new GPO, and then click Restore from Backup.
D. Right-click GPO1, and then click Copy. Right-click Starter GPOs, and then click Paste.
Answer: B
Explanation:
Although GPOs and Starter GPOs can both be copied, and a Starter GPO can be used to create a new GPO (as that is their purpose), an existing GPO cannot be copied to a new Starter GPO (unfortunately).
Q108. - (Topic 3)
You have a Hyper-V host named server1 that runs windows server 2012 R2.server1 host 50 virtual machines that run windows server 2012 R2
You enable and configure enhanced session mode on Server1.
You need to identify a new functionality available for the virtual machines hosted on server1.
What should you identify?
A. Smart card authentication using virtual machine connections
B. Redirection of RemoteFX USB drivers by using remote desktop connections
C. Redirection of RemoteFX USB drivers using virtual machine connections
D. smart card authentication using the remote desktop client.
Answer: B
Q109. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains 100 servers. The servers are contained in an organizational unit (OU) named Servers OU.
You need to create a group named Group1 on all of the servers in the domain. You must ensure that Group1 is added only to the servers.
What should you configure?
A. a Local Users and Groups preferences setting in a Group Policy linked to the Domain Controllers OU
B. a Restricted Groups setting in a Group Policy linked to the domain
C. a Local Users and Groups preferences setting in a Group Policy linked to ServersOU
D. a Restricted Groups setting in a Group Policy linked to Servers OU
Answer: C
Explanation:
A. This would add the group to the wrong OU
B. This would affect the whole domain and would effect member of the group
C. allows you to centrally manage local users and groups on domain member computers and is this is the correct OU for the GPO change
D. Restricted Groups defines what member or groups should exist as part of a group Why use Group Policy preferences? Unlike Group Policy settings, which App1y to both local computer policy and Active Directory policy, Group Policy preferences only App1y to Active Directory policy. You use preferences to configure many areas of the OS, including: System devices, such as USB ports, floppy drives and removable media Network shares and mapping network shares to drive letters System and user environment variables User and group accounts for the local computer VPN and dial-up networking connections Printer configuration and mapping Registry settings, schedule tasks and system services Settings for Folder Options, Internet Options and Regional and Language Options Settings for power schemes and power management Start Menu properties and menu items
Q110. - (Topic 3)
You have a server named Server1 that has the Print and Document Services server role installed.
You need to provide users with the ability to manage print jobs on Server1 by using a web browser.
What should you do?
A. Start the Printer Extensions and Notifications service and set the service to start automatically.
B. Install the LPD Service role service.
C. Start the Computer Browser service and set the service to start automatically.
D. Install the Internet Printing role service.
Answer: D
Explanation:
References: Internet printing makes it possible for computers running Windows Server 2008 to use printers located anywhere in the world by sending print jobs using Hypertext Transfer Protocol (HTTP). http://technet.microsoft.com/en-us/library/cc731368(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc731857.aspx