Testking mcsa 70 410 pdf Questions are updated and all mcsa 70 410 answers are verified by experts. Once you have completely prepared with our mcp 70 410 exam prep kits you will be ready for the real mcp 70 410 exam without a problem. We have Up to the immediate present Microsoft 70 410 pdf dumps study guide. PASSED 70 410 dumps pdf First attempt! Here What I Did.
Q171. - (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2. You add an additional disk to Server1 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that users can access the additional disk from drive C.
What should you do?
A. Convert Disk 0 to a dynamic disk and add a mirror.
B. Create a simple volume on Disk 1 and mount the volume to a folder.
C. Convert Disk 0 and Disk 1 to dynamic disks and extend a volume.
D. Convert Disk 1 to a dynamic disk and create a spanned volume.
Answer: B
Q172. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.
When you recently added new workstations to the Contoso.com manually, you found that that the computer accounts were created in the default container.
You want to make sure that the default container for newly created computers is redirected to a specified, target organizational unit (OU).
Which of the following actions should you take?
A. You should consider making use of the replace.exe command-line tool.
B. You should consider making use of the redircmp.exe command-line tool.
C. You should consider making use of the redirusr.exe command-line tool.
D. You should consider making use of the rexec.exe command-line tool.
Answer: B
Explanation:
redircmp.exe redirects the default container for newly created computers to a specified, target organizational unit (OU) so that newly created computer objects are created in the specific target OU instead of in CN=Computers.
Q173. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
An iSCSI SAN is available on the network.
Server1 hosts four virtual machines named VM1, VM2, VM3, VM4.
You create a LUN on the SAN.
You need to provide VM1 with access to the LUN. The solution must prevent other virtual machines from accessing the LUN.
What should you configure?
A. A fixed-size VHDX
B. A dynamically expanding VHDX
C. A fixed-size VHD
D. A pass-through disk
E. A dynamically expanding VHD
Answer: D
Explanation:
You can use physical disks that are directly attached to a virtual machine as a storage option on the management operating system. This allows virtual machines to access storage that is mapped directly to the server running Hyper-V without first configuring the volume. The storage can be either a physical disk which is internal to the server, or a SAN logical unit number (LUN) that is mapped to the server (a LUN is a logical reference to a portion of a storage subsystem). The virtual machine must have exclusive access to the storage, so the storage must be set in an Offline state in Disk Management. The storage is not limited in size, so it can be a multi-terabyte LUN. When using physical disks that are directly attached to a virtual machine, you should be aware of the following: This type of disk cannot be dynamically expanded. You cannot use differencing disks with them. You cannot take virtual hard disk snapshots. Att: If you are installing an operating system on the physical disk and it is in an Online state before the virtual machine is started, the virtual machine will fail to start. You must store the virtual machine configuration file in an alternate location because the physical disk is used by the operating system installation. For example, locate the configuration file on another internal drive on the server running Hyper-V.
Q174. - (Topic 1)
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Print and Document Services server role installed.
You connect a new print device to the network. The marketing department and the sales department will use the print device.
You need to provide users from both departments with the ability to print to the network print device. The solution must ensure that if there are multiple documents queued to print, the documents from the sales users print before the documents from the marketing users.
What should you do on Server1?
A. Add two printers. Modify the priorities of each printer and the security settings of each printer
B. Add two printers and configure printer pooling
C. Add one printer and configure printer pooling.
D. Add one printer. Modify the printer priority and the security settings
Answer: A
Explanation:
To set different print priority to different groups Open Printers and Faxes. Right-click the printer you want to set, click Properties, and then click the Advanced tab. In Priority, click the up or down arrows, and then click OK. Or, type a priority level, where 1 is the lowest level and 99 is the highest, and then click OK. Click Add Printer to add a second logical printer for the same physical printer. For instructions, see Related Topics. Click the Advanced tab. In Priority, set a priority higher than that of the first logical printer. Instruct the regular group of users to use the first logical printer name and the group with higher priority to use the second logical printer name. Set the appropriate permissions for the different groups.
Q175. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
You need to configure storage for a virtual machine to meet the following requirements: . Support up to 3 TB of data on a single hard disk.
. Allocate disk space as needed.
. Use a portable storage format.
What should you configure?
A. A fixed-size VHDX
B. A pass-through disk
C. A fixed-size VHD
D. A dynamically expanding VHDX
E. A dynamically expanding VHD
Answer: D
Explanation:
Support for virtual hard disk storage capacity of up to 64 TB.
vhd max is 2TB
Dynamically expanding virtual hard disk uses only as much physical storage space as it
needs to store the actual data that the disk currently contains. The size of the virtual disk’s
image file then grows as additional data is written to it.
References:
http://technet.microsoft.com/en-us/library/cc720381(v=ws.10).aspx
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Objective 3.2:
Create and Configure virtual machine storage, Chapter 3: p. 157-158
70-410: Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 7:
Hyper-V virtualization, Lesson 2: Deploying and Configuring virtual machines, p. 320
Q176. - (Topic 3)
Your network contains an Active Directory domain named contoso.com.
All user accounts in the marketing department reside in an organizational unit (OU) named OU1.
You have a Group Policy object (GPO) named GPO1. GPO1 contains Folder Redirection settings. GPO1 has default permissions.
You discover that the Folder Redirection settings are not applied to the users in the marketing department.
You open Group Policy Management as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that the Folder Redirection settings in GPO1 apply to the marketing users.
What should you do?
A. Modify the Delegation settings of GPO1.
B. Enable the link of GPO1.
C. Enforce GPO1.
D. Modify the link order of GPO1.
Answer: C
Q177. - (Topic 2)
Your network contains three servers that run Windows Server 2012 R2. The servers are configured as shown in the following table.
Server3 is configured to obtain an IP address automatically.
You need to prevent Server3 from receiving an IP address from Server1.
What should you create on Server1?
A. A reservation
B. A filter
C. A scope option
D. An exclusion
Answer: B
Explanation:
A. For clients that require a constant IP address
B. Filter to exclude MAC address of Server3
C. Range of allowed IP’s to be assigned
D. Exclude range of IP’s MAC address based filtering ensure that only a known set of devices in the system are able to obtain an IPAddress from the DHCP Reservation and Exclusion, two incredibly different concepts. An exclusion is an address or range of addresses taken from a DHCP scope that the DHCP server is not allowed to hand out. For example, if you have set a DHCP server to exclude the address range 192.168.0.1-192.168.0.10 then the only way a computer on your network would get an address of 192.168.0.4 would be if you assigned it statically on that machine. This is because DHCP knows NOT to give this range of IP addresses out. A reservation is a specific IP addresses that is tied to a certain device through its MAC address. For example, if we have a workstation on the network that requires a certain IP address, but we don’t want to go through to trouble of assigning it statically, then we can create a reservation for it. So if the MAC address of the NIC on the computer is AA-BB-00FF-CC-AA and we want it to maintain the IP address of 192.168.0.100 then we would create a DHCP reservation under that particular scope saying that the IP address
192.168.0.100 is reserved only for the MAC address AA-BB-00-FF-CC-AA. Reference: http://technet.microsoft.com/en-us/magazine/ff521761.aspx
Q178. - (Topic 1)
Your network contains two Hyper-V hosts that run Windows Server 2012 R2. The Hyper-V
hosts contain several virtual machines that run Windows Server 2012 R2.
You install the Network Load Balancing feature on the virtual machines.
You need to configure the virtual machines to support Network Load Balancing (NLB).
Which virtual machine settings should you configure?
A. DHCP guard
B. Port mirroring
C. Router guard
D. MAC address
Answer: D
Explanation:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/5b3a0a9d-26a2-49ba-bbbe- 29d11fcbb7ce/nlb-on-hyperv?forum=winserverhyperv
For NLB to be configured you need to enable MAC address spoofing.
Q179. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server 1. Server1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You create two IPv4 scopes on Server1. The scopes are configured as shown in the following table.
The DHCP clients in Subnet_Tor can connect to the client computers in Subnet_Mtl by using an IP address or a FQDN. You discover that the DHCP clients in Subnet_Mtl can connect to client computers in Subnet_Tor by using an IP address only.
You need to ensure that the DHCP clients in both subnets can connect to any other DHCP client by using a FQDN.
What should you add?
A. The 006 DNS Servers option to Subnet_Mtl
B. The 006 DNS Servers option to Subnet_Tor
C. The 015 DNS Domain Name option to Subnet_Mtl
D. The 015 DNS Domain Name option to Subnet_Tor
Answer: A
Q180. - (Topic 3)
You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
You are running a training exercise for junior administrators. You are currently discussing the use of Non-Uniform Memory Architecture (NUMA).
Which of the following is TRUE with regards to Non-Uniform Memory Architecture (NUMA)? (Choose two.)
A. It is a computer architecture used in multiprocessor systems.
B. It is a computer architecture used in single processor systems.
C. It allows a processor to access local memory faster than it can access remote memory.
D. It allows a processor to access remote memory faster than it can access local memory.
Answer: A,C
Explanation:
NUMA is a hardware design feature that divides CPUs and memory in a physical server into NUMA nodes. You get the best performance when a process uses memory and CPU from within the same NUMA node. de is full, then it’ll get memory from When a process requires more memory, but the current NUMA no another NUMA node and that comes at a performance cost to that process, and possibly all other processes on that physical server. And that’s why virtualization engineers need to be aware of this. In Hyper-V we have Dynamic Memory. Non-Uniform Memory Access or Non-Uniform Memory Architecture (NUMA) is a computer memory design used in multiprocessors, where the memory access time depends on the memory location relative to a processor. Under ccNUMA, a processor can access its own local memory faster than non-local memory, that is, memory local to another processor or memory shared between processors. NUMA architectures logically follow in scaling from symmetric multiprocessing (SMP) architectures.