Master the microsoft 70 410 exam Installing and Configuring Windows Server 2012 content and be ready for exam day success quickly with this Ucertify exam 70 410 pdf exam prep. We guarantee it!We make it a reality and give you real 70 410 dumps questions in our Microsoft 70 410 dumps braindumps.Latest 100% VALID Microsoft 70 410 exam questions and answers pdf Exam Questions Dumps at below page. You can use our Microsoft 70 410 questions braindumps and pass your exam.

Q251. DRAG DROP - (Topic 1) 

You have a server named Server1 that runs Windows Server 2012 R2. 

You need to create a new volume on Server1. 

The new volume must have the following configurations: Be stored on a new virtual hard disk Be assigned the drive letter G Have the NTFS file system In which order should you run the Diskpart commands? 

To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order. 


Q252. - (Topic 2) 

Your network contains an Active Directory domain named The domain contains a member server named Server1 and a domain controller named DC2.All servers run Windows Server 2012 R2. 

On DC2, you open Server Manager and you add Server1 as another server to manage. 

From Server Manager on DC2, you right-click Server1 as shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that when you right-click Server1, you see the option to run the DHCP console. 

What should you do? 

A. In the domain, add DC2 to the DHCP Administrators group. 

B. On Server1, install the Feature Administration Tools 

C. On DC2 and Server1, run winrmquickconfig. 

D. On DC2, install the Role Administration Tools. 



Q253. - (Topic 3) 

You work as a senior administrator at The network consists of a single domain named All servers on the network have Windows Server 2012 installed, and all workstations have Windows 8 installed. 

You are running a training exercise for junior administrators. You are currently discussing the Always Offline Mode. 

Which of the following is TRUE with regards to the Always Offline Mode? (Choose all that apply.) 

A. It allows for swifter access to cached files and redirected folders. 

B. To enable Always Offline Mode, you have to satisfy the forest and domain functional-level requirements, as well as schema requirements 

C. It allows for lower bandwidth usage due to users are always working offline. 

D. To enable Always Offline Mode, you must have workstations running Windows 7 or Windows Server 2008 R2. 

Answer: A,C 


There are no domain/forest/schema requirements, but clients must be running Windows 

8/Windows Server 2012 or later. 

Offline Files have four modes of operation: 

Online Slow link Auto offline Manual offline Offline Files transition between the three modes online, slow link and auto offline depending on connection speed. The user can always override the automatic mode selection by manually switching to manual offline mode. To determine the connection speed two pings with default packet size are sent to the file server. If the average round-trip time is below 80 ms (Windows 7) or 35 ms (Windows 8), the connection is put into online mode, otherwise into slow link mode. The latency value of 35/80 ms is configurable through the Group Policy setting Configure slow-link mode. Reads, Writes and Synchronization In online mode, changes to files are made on the file server as well as in the local cache (this induces a performance hit – see this article for details). Reads are satisfied from the local cache (if in sync). In slow link mode, changes to files are made in the local cache. The local cache is background-synchronized with the file server every 6 hours (Windows 7) or 2 hours (Windows 8), by default. This can be changed through the Group Policy setting Configure Background Sync. . In auto offline mode, all reads and writes go to the local cache. No synchronization occurs. . In manual offline mode, all reads and writes go to the local cache. No synchronization occurs by default, but background synchronization can be enabled through the Group Policy setting Configure Background Sync. 

Q254. - (Topic 3) 

You work as an administrator at The network consists of a single domain named All servers in the domain, including domain controllers, have Windows Server 2012 R2 installed. has a domain controller, named ABC-DC01, which contains the domain’s primary DNS zone.’s workstations refer to ABC-DC01 as their primary DNS server. 

You have been instructed to make sure that any DNS requests that are not for the domain, is resolved by ABC-DC01 querying the DNS server of’s Internet Service Provider (ISP). 

Which of the following actions should you take? 

A. You should consider configuring a reverse lookup zone. 

B. You should consider configuring forward lookup zone. 

C. You should consider configuring Forwarders. 

D. You should consider configuring 019 IP Layer Forwarding. 



A forwarder is a Domain Name System (DNS) server on a network that forwards DNS queries for external DNS names to DNS servers outside that network. You can also forward queries according to specific domain names using conditional forwarders. You designate a DNS server on a network as a forwarder by configuring the other DNS servers in the network to forward the queries that they cannot resolve locally to that DNS server. By using a forwarder, you can manage name resolution for names outside your network, such as names on the Internet, and improve the efficiency of name resolution for the computers in your network. 

Q255. - (Topic 3) 

You have two servers named Server1 and Server2. Both servers run Windows Server 2012 R2. The servers are configured as shown in the following table. 

The routing table for Server1 is shown in the Routing Table exhibit. (Click the Exhibit button.) 

From Server1, you attempt to ping Server2, but you receive an error message as shown in the Error exhibit. (Click the Exhibit button.) 

You need to ensure that you can successfully ping Server2 from Server1. What should you do on Server1? 

A. Disable Windows Firewall. 

B. Modify the subnet mask. 

C. Modify the DNS settings. 

D. Modify the default gateway settings. 



Route is used to view and modify the IP routing table. Route Print displays a list of current routes that the host knows. Default gateways are important to make IP routing work efficiently. TCP/IP hosts rely on default gateways for most of their communication needs with hosts on remote network segments. In this way, individual hosts are freed of the burden of having to maintain extensive and continuously updated knowledge about individual remote IP network segments. Only the router that acts as the default gateway needs to maintain this level of routing knowledge to reach other remote network segments in the larger inter network. In order for Host A on Network 1 to communicate with Host B on Network 2, Host A first checks its routing table to see if a specific route to Host B exists. If there is no specific route to Host B, Host A forwards its TCP/IP traffic for Host B to its own default gateway, IP Router 1. 

The Default Gateway specifies the IP address of a router on the local subnet, which the system will use to access destinations on other networks. If the default gateway settings are not properly configured, then there can be no successful connection. 


Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6: Network Administration, Lesson 4: Configuring IPv6/IPv4 Interoperability, p. 269 

Q256. - (Topic 2) 

You have a new server named Server1 that runs Windows Server 2012 R2. 

Server1 has two dual-core processors and 32 GB of RAM. 

You install the Hyper-V server role on Server1. 

You create two virtual machines on Server1 that each have 8 GB of memory. 

You need to minimize the amount of time it takes for both virtual machines to access 


What should you configure on each virtual machine? 

A. Resource control 

B. Memory weight 

C. Dynamic Memory 

D. NUMA topology 



Windows Server 2012 introduced support for projecting a virtual NUMA topology into Hyper-V virtual machines. This capability can help improve the performance of workloads running on virtual machines that are configured with large amounts of memory. 

Q257. - (Topic 3) 

Your network contains an Active Directory domain named All user accounts are in an organizational unit (OU) named Employees. 

You create a Group Policy object (GPO) named GP1. You link GP1 to the Employees OU. 

You need to ensure that GP1 does not apply to the members of a group named Managers. 

What should you configure? 

A. The Security settings of Employees 

B. The WMI filter for GP1 

C. The Block Inheritance option for Employees 

D. The Security settings of GP1 



A. Wrong Group 

B. Windows Management Instrumentation (WMI) filters allow you to dynamically determine 

the scope of Group Policy objects (GPOs) based on attributes of the target computer. 

C. Blocking inheritance prevents Group Policy objects (GPOs) that are linked to higher 

sites, domains, or organizational units from being automatically inherited by the child-level. 

D. Set Managers to – Members of this security group are exempt from this Group Policy 


Security settings. 

You use the Security Settings extension to set security options for computers and users 

within the scope of a Group Policy object. You can define local computer, domain, and network security settings. Figure below shows an example of the security settings that allow everyone to be affected by this GPO except the members of the Management group, who were explicitly denied permission to the GPO by setting the Apply Group Policy ACE to Deny. Note that if a member of the Management group were also a member of a group that had an explicit Allow setting for the Apply Group Policy ACE, the Deny would take precedence and the GPO would not affect the user. 

Q258. - (Topic 1) 

Your network contains an Active Directory forest named The forest contains two domains named and The forest contains two domain controllers. The domain controllers are configured as shown in the following table. 

You need to ensure that DC2 can provide authoritative responses for queries to the namespace. 

What should you do? 

A. On DC1, create a delegation. 

B. On DC1, change the replication scope of the zone. 

C. On DC2, create a forwarder. 

D. On DC2, modify the Zone Transfers settings. 



For DC1 to be able to provide authoritative responses to DNS queries the replication scope should be changed accordingly so that it has the zone data for the domain. 

Q259. HOTSPOT - (Topic 2) 

Your network contains a subnet named Subnet1. Subnet1 contains a DHCP server named 


You deploy a new subnet named Subnet2. On Subnet2, you deploy a new server named 

Server2 that runs Windows Server 2012 R2. 

You need to configure Server2 to route DHCP broadcast from Subnet2 to Server1. 

Which server role should you install on Server2? 

To answer, select the appropriate role in the answer area. 


Q260. - (Topic 3) 

You have a network printer connected to print server. You need to be able to print if print server goes down. 

What should you configure? 

A. branch office direct printing 

B. printer pooling 

C. spooling 

D. Print forwarding 



Branch Office Direct Printing can reduce Wide Area Network (WAN) usage by printing directly to a print device instead of a server print queue. This feature can be enabled or disabled on a per printer basis and is transparent to the user. It is enabled by an administrator using the Print Management Console or Windows PowerShell on the server. 

The printer information is cached in the branch office, so that if the print server is unavailable for some reason (for example if the WAN link to the data center is down), then it is still possible for the user to print. Branch Office Direct Printing requires the following operating systems: Windows Server 2012 Windows 8