Download of 70-417 download materials and questions for Microsoft certification for IT candidates, Real Success Guaranteed with Updated 70-417 pdf dumps vce Materials. 100% PASS Upgrading Your Skills to MCSA Windows Server 2012 exam Today!

2021 Jan 70-417 exam answers

Q161. Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server 1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. 

You create an external virtual switch named Switch1. Switch1 has the following configurations: 

. Connection type: External network 

. Single-root I/O virtualization (SR-IOV): Enabled 

Ten virtual machines connect to Switch1. 

You need to ensure that all of the virtual machines that connect to Switch1 are isolated from the external network and can connect to each other only. The solution must minimize network downtime for the virtual machines. 

What should you do? 

A. Remove Switch1 and recreate Switch1 as an internal network. 

B. Change the Connection type of Switch1 to Private network. 

C. Change the Connection type of Switch1 to Internal network. 

D. Remove Switch1 and recreate Switch1 as a private network. 

Answer: B 

Explanation: You can change the connection type of a virtual switch from the virtual switch manager without having to remove it. A private virtual network is isolated from all external network traffic on the virtualization server, as well any network traffic between the management operating system and the external network. This type of network is useful when you need to create an isolated networking environment, such as an isolated test domain. 

References: http://technet.microsoft.com/en-us/library/cc816585%28v=WS.10%29.aspx http://blogs.technet.com/b/jhoward/archive/2008/06/17/hyper-v-what-are-the-uses-for-different-types-of-virtual-networks.aspx 


Q162. You have a server named Server1 that runs Windows Server 2012 R2. You download and install the Microsoft Online Backup Service Agent on Server1. 

You need to ensure that you can configure an online backup from Windows Server Backup. 

What should you do first? 

A. From a command prompt, run wbadmin.exe enable backup. 

B. From Windows Server Backup, run the Register Server Wizard. 

C. From the Services console, modify the Log On settings of the Microsoft Online Backup Service Agent. 

D. From Computer Management, add the Server1 computer account to the Backup Operators group. 

Answer: B 

Explanation: 

Download and install the Windows Azure Online Backup Agent After you create an account on the Windows Azure Online Backup website, you can download the Windows Azure Online Backup Agent and install it locally. 

An Online Backup node then appears in the navigation pane of the Windows Server Backup console, as shown in Figure 12-If you prefer, you can also configure online backups from the Windows Azure Online Backup console, which becomes available after you install the agent. The Windows Azure Online Backup console provides exactly the same set of options as the Online Backup node in the Windows Server Backup console. 

Register server The next step is to register your server. Registering a server enables you to perform backups from that same server only. (Remember this point for the exam.) To register the server, from the Actions menu, select Register Server. The Register Server Wizard includes two configuration steps. First, you are given an opportunity to specify a proxy server if desired. Second, you are asked to provide a passphrase that will be used to encrypt your backup data and a location to save this passphrase in a file. You need to provide this passphrase when you perform a restore operation, so it's essential that you don't lose it. (Microsoft doesn't maintain a copy of your passphrase.) A Generate Passphrase option creates the passphrase for you automatically. After you register a server, new options for Online Backup appear in the Actions pane, including Schedule Backup, Recover Data, Change Properties, and Unregister Server. 


Q163. Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are configured as shown in the following table. 

You need to ensure that when new targets are added to Server1, the targets are registered on Server2 automatically. 

What should you do on Server1? 

A. Configure the Discovery settings of the iSCSI initiator 

B. Configure the security settings of the iSCSI target 

C. Run the Set-Wmilnstance cmdlet 

D. Run the Set-IscsiServerTarget cmdlet 

Answer: C 


Q164. You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2 Standard. You establish a Remote Desktop session to Server1. 

You need to identify which task can be performed on Server1 from within the Remote Desktop session. 

What should you identify? 

A. Install a feature by using Server Manager. 

B. Modify the network settings by using Sconfig. 

C. Disable services by using Msconfig. 

D. Join a domain by using the System Properties. 

Answer: B 

Explanation: In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. You must be a member of the Administrators group to use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server with a GUI mode. 

http://technet.microsoft.com/en-us/library/jj647766.aspx Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 2: Deploying servers, p. 80 


Q165. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC4 that runs Windows Server 2012 R2. 

You create a DCCIoneConfig.xml file. You need to clone DC4. 

Where should you place DCCIoneConfig.xml on DC4? 

A. %Systemroot%\SYSVOL 

B. %Systemdrive% 

C. %Systemroot%\NTDS 

D. %Programdata%\Microsoft 

Answer: C 

Explanation: 

http://technet.microsoft.com/de-de/library/hh831734.aspx 


Up to the minute 70-417 question:

Q166. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. 

You pre-create a read- only domain controller (RODC) account named RODC1. You export the settings of RODC1 to a file named File1.txt. 

You need to promote RODC1 by using File1.txt. 

Which tool should you use? 

A. The Install-WindowsFeaturecmdlet 

B. The Add-WindowsFeaturecmdlet 

C. TheDism command 

D. TheDcpromo command 

E. The Install-ADDSDomainControllercmdlet 

Answer: D 

Explanation: 

DCPromo is gone, HOWEVER, it is still used for unattend installations using unattended files. This allows administrators the chance to get used to using powershell commands instead of the unattended file. 

http://technet.microsoft.com/en-us/library/hh472162.aspx NB: http://technet.microsoft.com/en-us/library/jj205467.aspx Install-WindowsFeature Installs one or more Windows Server roles, role services, or features on either the local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and replaces Add- WindowsFeature, the cmdlet that was used to install roles, role services, and features in Windows Server 2008 R2. So the 2 first answers are the same and we only have one choice here... 


Q167. You have a server named File1 that runs Windows Server 2012 R2. File1 has the File Server role service installed. You plan to back up all shared folders by using Microsoft Online Backup. 

You download and install the Microsoft Online Backup Service Agent on File1. 

You need to ensure that you use Windows Server Backup to back up data to Microsoft Online Backup. 

What should you do? 

A. From Computer Management, add the File1 computer account to the Backup Operators group. 

B. From the Services console, modify the Log On settings of the Microsoft Online Backup Service Agent. 

C. From Windows Server Backup, run the Register Server Wizard. 

D. From a command prompt, run wbadmin.exe enable backup. 

Answer: C 

Explanation: 

Download and install the Windows Azure Online Backup Agent After you create an account on the Windows Azure Online Backup website, you can download the Windows Azure Online Backup Agent and install it locally. 

An Online Backup node then appears in the navigation pane of the Windows Server Backup console, as shown in Figure 12-

If you prefer, you can also configure online backups from the Windows Azure Online Backup console, which becomes available after you install the agent. The Windows Azure Online Backup console provides exactly the same set of options as the Online Backup node in the Windows Server Backup console. 

Register server The next step is to register your server. Registering a server enables you to perform backups from that same server only. (Remember this point for the exam.) To register the server, from the Actions menu, select Register Server. The Register Server Wizard includes two configuration steps. First, you are given an opportunity to specify a proxy server if desired. Second, you are asked to provide a passphrase that will be used to encrypt your backup data and a location to save this passphrase in a file. You need to provide this passphrase when you perform a restore operation, so it's essential that you don't lose it. (Microsoft doesn't maintain a copy of your passphrase.) A Generate Passphrase option creates the passphrase for you automatically. After you register a server, new options for Online Backup appear in the Actions pane, including Schedule Backup, Recover Data, Change Properties, and Unregister Server. 


Q168. RAG DROP 

You have a server that runs Windows Server 2012 R2. 

You create a new work folder named Share1. 

You need to configure Share1 to meet the following requirements: 

Ensure that all synchronized copies of Share1 are encrypted. 

Ensure that clients synchronize to Share1 every 30 minutes. 

Ensure that Share1 inherits the NTFS permissions of the parent folder. 

Which cmdlet should you use to achieve each requirement? 

To answer, drag the appropriate cmdlets to the correct requirements. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

... 

Answer: 


Q169. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server3 that runs Windows Server 2012 R2 and has the DHCP Server server role installed. 

DHCP is configured as shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that only Scope1, Scope3, and Scope5 assign the same DNS servers 

to DHCP clients. 

The solution must minimize administrative effort. 

What should you do? 

Exhibit: 

A. Create a superscope and a filter 

B. Create a superscope and scope-level policies 

C. Configure the Server Options 

D. Configure the Scope Options 

Answer: D 

242. You have a server named Server1 that runs Windows Server 2012 R2. Each day, Server1 is backed up fully to an external disk. 

On Server1, the disk that contains the operating system fails. 

You replace the failed disk. 

You need to perform a bare-metal recovery of Server1 by using the Windows Recovery Environment (WindowsRE). 

What should you do? 

A. Run the Start-WBVolumeRecovery cmdlet and specify the -backupset parameter 

B. Run the Get-WBBareMetalRecovery cmdlet and specify the -policy parameter 

C. Run the wbadmin.exe start recovery command and specify the -recoverytarget parameter 

D. Run the wbadmin.exe start sysrecovery command and specify the -backuptarget parameter 

Answer: D 


Q170. RAG DROP 

You have a server named Server1 that runs Windows Server 2012 R2. You are asked to test Windows Azure Online Backup to back up Server1. You need to back up Server1 by using Windows Azure Online Backup. 

Which four actions should you perform in sequence? To answer, move the appropriate four actions from the list of actions to the answer area and arrange them in the correct order. 

Answer: