It is impossible to pass Microsoft 70-417 exam without any help in the short term. Come to Exambible soon and find the most advanced, correct and guaranteed Microsoft 70-417 practice questions. You will get a surprising result by our Rebirth Upgrading Your Skills to MCSA Windows Server 2012 practice guides.

2021 Dec 70-417 free practice exam

Q151. Your network contains two servers named HV1 and HV2. Both servers run Windows Server 2012 R2 and have the Hyper-V server role installed. 

HV1 hosts 25 virtual machines. The virtual machine configuration files and the virtual hard disks are stored in D:\VM. 

You shut down all of the virtual machines on HV1. 

You copy D:\VM to D:\VM on HV2. 

You need to start all of the virtual machines on HV2. You want to achieve this goal by using the minimum amount of administrative effort. 

What should you do? 

A. From HV1, export all virtual machines to D:\VM. Copy D:\VM to D:\VM on HV2 and overwrite the existing files. On HV2, run the New Virtual Machine wizard. 

B. From HV1, export all virtual machines to D:\VM. Copy D:\VM to D:\VM on HV2 and overwrite the existing files. On HV2, run the Import Virtual Machine wizard. 

C. Run the Import-VM InitialReplicationcmdlet. 

D. Run the Import-VM cmdlet. 

Answer: D 

Explanation: The Import-VM cmdlet imports a virtual machine from a file. 


Q152. Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. The domain contains four domain controllers. 

The domain controllers are configured as shown in the following table. 

All domain controllers are DNS servers. 

You plan to deploy a new domain controller named DC5 in the contoso.com domain. 

You need to identify which domain controller must be online to ensure that DC5 can be 

promoted successfully to a domain controller. 

Which domain controller should you identify? 

A. DC1 

B. DC2 

C. DC3 

D. DC4 

Answer: C 

Explanation: 

In order to add a Domain Controller to corp.contoso.com, you need PDC and RID of that domain, not of the root domain. The Domain Naming Master is needed to add, remove and rename domains in the forest, i.e. not for individual Domain Controllers. 


Q153. Your network contains two servers named Server 1 and Server 2 that run Windows Server 2012 R2. Both servers have the Hyper-V server role installed. Server 1 and Server 2 are located in different offices. The offices connect to each other by using a high-latency WAN link. 

Server 1 hosts a virtual machine named VM1. 

You need to ensure that you can start VM1 on Server 2 if Server 1 fails. The solution must minimize hardware costs. 

What should you do? 

A. From the Hyper-V Settings of Server2, modify the Replication Configuration settings. Enable replication for VM1. 

B. on Server 1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1. 

C. on Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1. 

D. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enable replication for Vml. 

Answer: A 


Q154. Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. 

HVServer1 hosts 10 generation 1 virtual machines. All of the virtual machines connect to a virtual switch named Switch1. Switch1 is configured as a private network. All of the virtual machines have the DHCP guard and the router guard settings enabled. 

You install the DHCP server role on a virtual machine named Server1. You authorize Server1 as a DHCP server in contoso.com. You create an IP scope. 

You discover that the virtual machines connected to Switch1 do not receive IP settings from Server1. 

You need to ensure that the virtual machines can use Server1 as a DHCP server. 

What should you do? 

A. Enable MAC address spoofing on Server1. 

B. Enable single-root I/O visualization (SR-IOV) on Server1. 

C. Disable the DHCP guard on Server1. 

D. Disable the DHCP guard on all of the virtual machines that are DHCP clients. 

Answer: C 

Explanation: DHCP guard setting This setting stops the virtual machine from making DHCP offers over this network interface. To be clear – this does not affect the ability to receive a DHCP offer (i.e. if you need to use DHCP to acquire an IP address that will work) it only blocks the ability for the virtual machine to act as a DHCP server. 


Q155. Your network contains an Active Directory domain named contoso.com. 

Network Policy Server (NPS) is deployed to the domain. 

You plan to deploy Network Access Protection (NAP). 

You need to configure the requirements that are validated on the NPS client computers. 

What should you do? 

A. From the Network Policy Server console, configure a health policy. 

B. From the Network Policy Server console, configure a network policy. 

C. From a Group Policy object (GPO), configure the NAP Client Configuration security setting. 

D. From a Group Policy object (GPO), configure the Network Access Protection Administrative Templates setting. 

E. From the Network Policy Server console, configure a Windows Security Health Validator (WSHV) policy. 

Answer: E Explanation: 

I feel the question is a bit unclear still. 

http://technet.microsoft.com/en-us/library/cc731260.aspx 

WSHV settings 

If a client computer is noncompliant with one of the requirements of the WSHV, it is 

considered noncompliant with the WSHV as a whole. If a computer is determined to be 

noncompliant with the WSHV, the following actions might be taken: 

I believe that the validation will take into account Health and Network, so it has to be both 

of them. 

I don't see A or D being a valid choice. 

Leaving us with E. And, the site kinda confirm this. 


Up to the immediate present 70-417 actual exam:

Q156. You have 30 servers that run Windows Server 2012 R2. 

All of the servers are backed up daily by using Windows Azure Backup. 

You need to perform an immediate backup of all the servers to Windows Azure Backup. 

Which Windows PowerShell cmdlets should you run on each server? 

A. Get-OBPolicy | Start-OBBackup 

B. Get-WBPolicy | Start-WBBackup 

C. Start-OBRegistration | Start-OBBackup 

D. Get-WBBackupTarget | Start-WBBackup 

Answer: A 

Explanation: Explanation/Explanation: 

A. starts a backup job using a policy 

B. Registers the current computer to Windows Azure Backup. 

C. Not using Azure 

D. Not using Azure 

http://technet.microsoft.com/en-us/library/hh770406(v=wps.620).aspx http://technet.microsoft.com/en-us/library/hh770426.aspx http://technet.microsoft.com/en-us/library/hh770398.aspx 


Q157. DNS record types come in many forms, but which record type is being described below? 

Maps a domain name such as www.google.com to an IP address 

A. A 

B. CNAME 

C. MX 

D. PTR 

Answer: A 


Q158. Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012 R2. The domain contains a virtual machine named DC2. 

On DC2, you run Get-ADDCCloningExcludcdApplicationList and receive the output shown in the following table. 

You need to ensure that you can clone DC2. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. Option A 

B. Option B 

C. Option C 

D. Option D 

E. Option E 

Answer: A,E 

Explanation: 

Because domain controllers provide a distributed environment, you could not safely clone an Active Directory domain controller in the past. 

Before, if you cloned any server, the server would end up with the same domain or forest, which is unsupported with the same domain or forest. You would then have to run sysprep, which would remove the unique security information before cloning and then promote a domain controller manually. When you clone a domain controller, you perform safe cloning, which a cloned domain controller automatically runs a subset of the sysprep process and promotes the server to a domain controller automatically. 

The four primary steps to deploy a cloned virtualized domain controller are as follows: 

. Grant the source virtualized domain controller the permission to be cloned by 

adding the source virtualized domain controller to the Cloneable Domain 

Controllers group. 

. Run Get-ADDCCloningExcludedApplicationListcmdlet in Windows PowerShell to 

determine which services and applications on the domain controller are not compatible with the cloning. . Run New-ADDCCloneConfigFile to create the clone configuration file, which is stored in the C:\Windows\NTDS. . In Hyper-V, export and then import the virtual machine of the source domain controller. 

Run Get-ADDCCloningExcludedApplicationListcmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationListcmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationListcmdlet before the New-ADDCCloneConfigFilecmdlet because if the New-ADDCCloneConfigFilecmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml 

The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file. Note: The Get-ADDCCloningExcludedApplicationListcmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail. The Get-ADDCCloningExcludedApplicationListcmdlet needs to be run before the New-ADDCCloneConfigFilecmdlet is used because if the New-ADDCCloneConfigFilecmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways. 

The New-ADDCCloneConfigcmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.) 

You can populate the XML file. . . . . doesn't need to be empty. . . . . 

http: //technet. microsoft. com/en-us/library/hh831734. aspx http: //blogs. dirteam. com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directory-domain-services-in-windows-server-2012-part-13-domain-controller-cloning. aspx 


Q159. OTSPOT 

Your network contains an Active Directory domain named contoso.com. 

You have a failover cluster named Cluster1 that contains two nodes named Server1 and Server2. Both servers run Windows Server 2012 R2 and have the Hyper-V server role installed. 

You plan to create two virtual machines that will run an application named App1. App1 will store data on a virtual hard drive named App1data.vhdx. App1data.vhdx will be shared by both virtual machines. 

The network contains the following shared folders: 

An SMB file share named Share1 that is hosted on a Scale-Out File Server. An SMB file share named Share2 that is hosted on a standalone file server. An NFS share named Share3 that is hosted on a standalone file server. 

You need to ensure that both virtual machines can use App1data.vhdx simultaneously. 

What should you do? 

To answer, select the appropriate configurations in the answer area. 

... 

Answer: 


Q160. Your network contains an Active Directory forest named contoso.com. All domain controllers currently run Windows Server 2008 R2. 

You plan to install a new domain controller named DC4 that runs Windows Server 2012 R2. 

The new domain controller will have the following configurations: 

Schema master 

Global catalog server 

DNS Server server role 

Active Directory Certificate Services server role 

.... 

You need to identify which configurations cannot be fulfilled by using the Active Directory Domain Services Configuration Wizard. 

Which two configurations should you identify? (Each correct answer presents part of the solution. Choose two.) 

A. Enable the global catalog server. 

B. Transfer the schema master. 

C. Install the Active Directory Certificate Services role. 

D. Install the DNS Server role. 

Answer: B,C 

Explanation: 

AD Installation Wizard will automatically install DNS and allows for the option to set it as a global catalog server. ADCS and schema must be done separately.