Microsoft 70-698 Exam Questions 2021

NEW QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains a single Active Directory domain named contoso.com. The domain contains two computers named Computer1 and Computer2.
A user named User1 is a member of the local Administrators group on Computer1 and Computer2. User1 fails to remotely manage the devices on Computer2 by using Device Manager on Computer1. User1 can connect to Computer2 remotely by using Computer Management.
You need to ensure that User1 can disable a device on Computer2 remotely.
Solution: You enable Remote Desktop on Computer2, and you instruct User1 to use Remote Desktop. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: https://technet.microsoft.com/en-us/library/cc766438(v=ws.11).aspx

NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains a single Active Directory domain named contoso.com. The domain contains two computers named Computer1 and Computer2.
A user named User1 is a member of the local Administrators group on Computer1 and Computer2. User1 fails to remotely manage the devices on Computer2 by using Device Manager on Computer1. User1 can connect to Computer2 remotely by using Computer Management.
You need to ensure that User1 can disable a device on Computer2 remotely.
Solution: You start the Plug and play and Remote Registry services on Computer2. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: http://winintro.com/?Category=Windows_10_2021
&Policy=Microsoft.Policies.DeviceInstallation%3A%3ADeviceManagement_RPCInterface_Allow

NEW QUESTION 3
A company plans to deploy an app that requires a virtual private network (VPN) connection. You create a VPN named AppService on all client devices.
The VPN connection must be enabled automatically when the app starts and timeout 30 seconds after the app is closed.
You need to configure the VPN settings.
Which Windows PowerShell cmdlets should you run? To answer, configure the appropriate options in the dialog box in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/vpnclient/add-vpnconnectiontriggerapplication?view=win1 https://docs.microsoft.com/en-us/powershell/module/vpnclient/set-vpnconnection?view=win10-ps

NEW QUESTION 4
You configure the Group Policy settings on a computer that runs Windows 10 as shown in the following graphic:

Use the drop-down menus to select the answer choice that completes each statement based on the information graphic.

Answer:

Explanation: *Box 1*
be unavailable
*Box 2*
never receive updates
https://technet.microsoft.com/en-us/itpro/windows/manage/stop-employees-from-using-the-windows-store https://www.windows-security.org/33e3086c986daafa5c4a04eac23a1bf2/turn-off-automatic-download-and-insta

NEW QUESTION 5
Your network contains a single Active Directory domain named contoso.com.
The domain contains two computes named Computer1 and Computer2 and a domain controller named DC1. On Computer1, you run the net user Uscr1 command and you receive the following output:

Answer:

Explanation: Box1. Net accounts command Box2. Computer1 only
https://technet.microsoft.com/en-us/library/bb490698.aspx

NEW QUESTION 6
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer named Computer1 that has storage configured as shown in the following table.

Pool1 contains a storage space named Space1 that is 300 GB. Pool3 contains a storage space named Space2 that is 100 GB. Pool2 is empty.You discover that Distc2 experiences physical errors.
You need to ensure that all of the data in Space1 is stored on other disks in the storage pool only. What should you use?

• A. Add-PhysicalDisk
• B. Diskpart
• C. New-VirtualDisk
• D. Remove-PhysicalDisk
• E. Resize-VirtualDisk
• F. Set-StoragePool
• G. Subst
• H. Update-Disk

Answer: F

Explanation: https://technet.microsoft.com/en-us/library/hh848697(v=wps.630).aspx

NEW QUESTION 7
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains a single Active Directory domain named contoso.com. All computers are members of the domain and run the 64-bit version of Windows 10 Enterprise.
On a test computer named Computer_Test1, you pin several company-specific applications in a group named Contoso Apps, and then you export the start menu layout to a file named contoso.xml.
You install Client Hyper-V on a computer named Computer6.
You identity the following requirements.
•Install the Hyper V feature on a computer named Computer1.
•Use virtual smart card authentication on a computer named Computer2.
•Enable Secure Boot on a computer named Computer3.
•Connect a computer named Computer4 to a projector by using Miracast.
•Ensure that a user named User 1 can use keyboard shortcuts by pressing one key at a time.
•Ensure that you can share the clipboard between Computer6 and the virtual machines running on Computer6.
•Add the Contoso Apps group to the Start menu of a computer named Computer7.
End of repeated scenario.
Which hardware feature must Computer4 must support?

• A. a Wi-Fi adapter
• B. a Bluetooth adapter
• C. an HDMI port
• D. a MiniDisplayPort connector

Answer: A

Explanation: https://www.microsoft.com/en-za/windows/windows-10-specifications#sysreqs

NEW QUESTION 8
Your network contains a single Active Directory domain. The domain contains two computers named Computer1 and Computer2.
From Computer1, you need to view the installed devices and their associated drivers on Computer2. What should you use?

• A. the Get-PnpDevice cmdlet
• B. the Get-WindowsDriver cmdlet
• C. the Get-OdbcDriver cmdlet
• D. the driverquery.exe command

Answer: D

Explanation: https://blogs.technet.microsoft.com/askperf/2011/10/21/two-minute-drill-driverquery-exe/

NEW QUESTION 9
A company has client computers that run Windows 10. The client computer systems frequently use IPSec tunnels to securely transmit data.
You need to configure the IPSec tunnels to use 256-bit encryption keys. Which encryption type should you use?

• A. 3DES
• B. DES
• C. RSA
• D. AES

Answer: D

Explanation: https://en.wikipedia.org/wiki/Advanced_Encryption_Standard

NEW QUESTION 10
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You purchase a new USB drive. You apply a custom image of Windows to the USB drive.
You plan to modify the BIOS setting on a computer so that the computer can start from the USB drive. You need to ensure that you can start the computer by using the USB drive.
What should you run?

• A. Add-Windows Image
• B. bcdboot.exe
• C. bcdedit.exe
• D. bootcfg.exe
• E. bootim.exe
• F. bootsect.exe
• G. diskpart.exe
• H. Expand-Windows Image

Answer: D

Explanation: https://support.microsoft.com/en-us/help/317521/description-of-the-bootcfg-command-and-its-uses

NEW QUESTION 11
You are using sysprep to prepare a system for imaging.
You want to reset the security ID (SID) and clear the event logs.
Which option should you use?

• A. /generalize
• B. /oobe
• C. /audit
• D. /unattend

Answer: A

Explanation: Generalize prepares the Windows installation to be imaged.
If this option is specified, all unique system information is removed from the Windows installation. The security ID (SID) resets, any system restore points are cleared, and event logs are deleted.
The next time the computer starts, the specialize configuration pass runs. A new security ID (SID)is created, and the clock for Windows activation resets, if the clock has not already been reset three times.

NEW QUESTION 12
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer named Computer1 that has storage configured as shown in the following table:

Pool1 contains a storage space named Space1 that is 300 GB. Pool3 contains a storage space named Space2 that is 100 GB. Pool2 is empty.
You need to add Disk6 to Pool1. What should you use?

• A. Add-PhysicalDisk
• B. Diskpart
• C. New-VirtualDisk
• D. Remove-PhysicalDisk
• E. Resize-VirtualDisk
• F. Set-StoragePool
• G. Subst
• H. Update-Disk

Answer: A

Explanation: https://technet.microsoft.com/en-us/library/hh848702(v=wps.630).aspx

NEW QUESTION 13
You have a reference computer named Computer1 that runs Windows 10. You plan to run sysprep.exe several times on Computer1.
You need to prevent the Windows Product Activation clock from being reset on Computer1. What should you do?

• A. Set the ProductKey option in Sysprep.inf to XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
• B. Set the SkipRearm option in Unattend.xml to 0.
• C. Set the ProductKey option in Sysprep.inf to 00000-00000-00000-00000-00000
• D. Set the SkipRearm option in Unattend.xml to 1.

Answer: D

Explanation: SkipRearm is a registry entry which specifies whether to run the Windows Software Licensing Rearm program. Rearming a computer restores Windows Vista and later, to the original licensing state. All licensing and registry data related to activation is either removed or reset. Any grace period timers are reset as well.
0 : Specifies that the computer will be rearmed & any grace period timers will be reset
1 : Specifies that the computer will not be rearmed & grace period timers will not be reset. References:
https://www.thewindowsclub.com/legally-use-windows-without-activating

NEW QUESTION 14
You have a computer named Computer1 that runs Windows 10.
Computer1 has two volumes named C and D. Volume C is formatted NTFS and volume D is formatted exFAT.
You need to ensure that you can recover files stored in D:Data. What should you use?

• A. System Restore points
• B. File History
• C. wbadmin.exe
• D. Backup and Restore (Windows 7)

Answer: B

Explanation: http://www.digitalcitizen.life/introducing-windows-8-how-backup-data-file-history

NEW QUESTION 15
Your company uses a Window Store for Business that contains an app named App1. You have three computers that are prevented from accessing the Internet.
You need to distribute App1 to the three computers.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

• A. a provisioning package created by using Windows Imaging and Configuration Designer
• B. A deployment from Microsoft Intune.
• C. A deployment from Windows Deployment Services (WDS)
• D. an AppX package deployed by using Deployment Imaging Servicing and Management (DISM)
• E. an answer file created by using Windows System Image Manager (Windows SIM)

Answer: DE

Explanation: https://technet.microsoft.com/en-us/itpro/windows/deploy/windows-deployment-scenarios-and-tools

NEW QUESTION 16
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains a single Active Directory domain named contoso.com. All computers are members of the domain and run the 64-bit version of Windows 10 Enterprise.
On a test computer named Computer_Test1, you pin several company-specific applications in a group named Contoso Apps, and then you export the start menu layout to a file named contoso.xml.
You install Client Hyper-V on a computer named Computer6. You identity the following requirements.
•Install the Hyper V feature on a computer named Computer1.
•Use virtual smart card authentication on a computer named Computer2.
•Enable Secure Boot on a computer named Computer3.
•Connect a computer named Computer4 to a projector by using Miracast.
•Ensure that a user named User 1 can use keyboard shortcuts by pressing one key at a time.
•Ensure that you can share the clipboard between Computer6 and the virtual machines running on Computer6.
•Add the Contoso Apps group to the Start menu of a computer named Computer7.
End of repeated scenario.
You need to meet the requirement of Computer6. What should you configure?

• A. NUMA spanning
• B. enhanced session mode
• C. Hyper-V Guest Service Interface
• D. RemoteFX

Answer: B

Explanation: https://technet.microsoft.com/en-us/windows-server-docs/compute/hyper-v/learn-more/use-local-resources-on-h

NEW QUESTION 17
Your network contains a single Active Directory domain. The domain contains a laptop named Compute1 I that runs Windows 10.
A user named User1 uses Computer1. Computer1 connects to two shared printers named Printer1 and Printer2. Printer1 is located at the office and Pnnter2 is located at the home of User1.
User1 frequently reports that when attempting to print, the default printer is set to Printer2. You need to ensure that Printer1 is the default printer always.
What should you do?

• A. Add Printer 2 to a home group.
• B. Disable Let Windows manage my default printer.
• C. Change the priority of Printer1 to 1.
• D. Change the priority of Printer2 to 1.

Answer: B

Explanation: http://www.tenforums.com/tutorials/26138-printer-turn-off-let-windows-10-manage-default-printer.html

NEW QUESTION 18
You have a laptop that has a high resolution display.
The Change the size of the text, apps, and other items setting is set to 175%. You install a desktop application name App1.
When you start App1, the visual elements are misaligned, and the application interface does not appear as expected.
You need to ensure that App1 is displayed properly without affecting how other applications are displayed. What should you do?

• A. Create an AppX package for App1.
• B. Run App1 as an administrator.
• C. Modify the Compatibility settings of App1.
• D. Configure an AppLocker rule for App1.

Answer: A

Explanation: https://msdn.microsoft.com/en-us/library/hh454036.aspx#ImageSize

NEW QUESTION 19
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
Your network contains a single Active Directory domain. The domain contains a VPN server that supports all of the VPN protocols.
A user named User1 works from home and has a desktop computer that runs Windows 10 Pro. User1 has an application named App1 that requires access to a server on the corporate network. User1 creates a VPN connection on the computer.
You need to ensure that when User1 opens App1, App1 can access the required data. What should you do?

• A. Click Turn on password protected sharing.
• B. Disable Network Discovery.
• C. Modify the Profile settings of an incoming firewall rule.
• D. Run the Add-VpnConnectionTriggerApplication cmdlet.
• E. Run the New-NetFirewallRule cmdlet and specify the- Direction Outbound parameter.
• F. Run the New-VpnConnection cmdlet.
• G. Run the Set-NetConnectionProfile cmdlet.
• H. Run the Set-VPNConnection cmdlet.

Answer: D

Explanation: https://technet.microsoft.com/en-us/library/dn296460(v=wps.630).aspx

NEW QUESTION 20
You have a computer named Computer1 that has the following stored credentials:
Which two passwords can be viewed in clear text from Credential Manager on Computer1?

• A. the web credential for accessing the HTTPS URL
• B. the Windows credential for accessing the shared folder
• C. the Windows credential for accessing the HTTP URL
• D. the Windows credential for accessing Remote Desktop
• E. the web credential for accessing the HTTP URL

Answer: BD

Explanation: http://www.digitalcitizen.life/credential-manager-where-windows-stores-passwords-other-login-details