Act now and download your 70-741 dumps today! Do not waste time for the worthless 70-741 exam tutorials. Download 70-741 exam with real questions and answers and begin to learn 70-741 dumps with a classic professional.
Also have 70-741 free dumps questions for you:
NEW QUESTION 1
Your network contains an Active Directory domain named contoso.com. The domain contains a domain-based Distributed file System (DFS) namespace named Namespace1 that has access-based enumeration enabled. Namespace1 has a folder named folder1. Folder1 has a target of \Server1Folder1.
The Permission for folder1 are configured as shown in the following table.
Access-based enumeration is disabled for the share of Folder1.
You need to ensure that both User1 and User2 can see Folder1 when they access \Contoso.comNameSpace1 What should you do?
- A. Enable access-based enumeration for Folder1.
- B. Disable access-based enumeration for Namespace1.
- C. Assign User1 the read NTFS permission to folder1
- D. Deny User1 the read DFS permission to Folder1.
Answer: C
NEW QUESTION 2
You have a server named Server1 that has a Server Core installation of Windows Server 2021. Server1 is configured to obtain an IP address automatically.
You need to configure the IPv4 address, netmask, and default gateway manually for a network interface named Ethernet on Server1.
What should you run?
- A. ipconfig.exe
- B. New-NetiPAddress
- C. Set-NetAdapter
- D. Set-NetIPv4Protocol
Answer: B
Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/nettcpip/new-netipaddress?view=win10-ps
NEW QUESTION 3
You have two servers named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 have the Network Policy Server role service installed.
Server1 is configured to forward connection requests to Server2.
Incoming connection requests to Server1 contain the User Name attribute. The User Name attribute does not contain the domain name suffix.
You need to ensure that the User Name attribute will be replaced by using a format of username@contoso.com.
How should you configure the attribute manipulation role on Server1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation: 
NEW QUESTION 4
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
You need to ensure that when a record is added dynamically to fabrikam.com, only the computer that created the record can modify the record. The solution must allow administrators to modify all of the records in fabrikam.com.
What should you do?
- A. Change fabrikam.com to an Active Directory-integrated zone.
- B. Raise the functional level of the domain.
- C. Modify the security settings of the Fabrikam.com.dns file.
- D. Modify the Start of Authority (SOA) settings of fabrikam.com
Answer: A
Explanation: https://technet.microsoft.com/en-us/library/cc753751(v=ws.11).aspx
NEW QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a network administrator for a company named Contoso, Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2. Server2 has the following configured: 
Network address translation (NAT) The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to Server2. You identify the following requirements: Add 28 devices to subnet2 for a temporary project. Configure Server2 to accept VPN connections from the internet. Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
You deploy a computer named ComputerA to Subnet1. ComputerA has an IP address of 10.10.0.129 and a subnet mask of 255.255.255.0.
You plan to use ComputerA to access the resources on Web1.
Which IP address should you use as the default gateway on ComputerA?
- A. 10.10.1.1
- B. 10.10.0.224
- C. 131.107.0.223
- D. 172.16.128.193
Answer: B
NEW QUESTION 6
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
You need to ensure that when a computer is removed from the network, the associated records are deleted automatically after 15 days.
Which two actions should you perform? Each correct answer presents part of the solution.
- A. Create a scheduled task that runs the Remove-Computer cmdlet.
- B. Modify the Zone Aging/Scavenging Properties of the zone.
- C. Modify the Time to live (TTL) value of the start of authority (SOA) record.
- D. Set the Scavenging period of Server1.
- E. Modify the Expires after value of the start of authority (SOA) record.
Answer: BD
Explanation: https://technet.microsoft.com/en-us/library/cc771362(v=ws.10).aspx
NEW QUESTION 7
Your network contains an Active Directory domain named contoso.com. The domain contains a domain-based Distributed File System (DFS) namespace named Namespace1 that has access-based enumeration enabled. Namespace1 has a folder named Folder1. Folder1 has a target of \Server1Folder1.
The permissions for folder1 are configured as shown in the following table.
Access-based enumeration is disabled for the share of Folder1.
You need to ensure that both User1 and User2 can see Folder1 When they access\Contoso.comNameSpace1. What should you do?
- A. Disable access-based enumeration for Namespace1.
- B. Run the Set-DfsnFolder cmdlet.
- C. Run the Set-DfsFolderTarget cmdlet.
- D. Deny User1 the read DFS permission to Folder1.
Answer: A
NEW QUESTION 8
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2021 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.
The virtual machines are configured as follows:
Each virtual machine has one virtual network adapter. VM1 and VM2 are part of a Network Load Balancing (NLB) cluster. All of the servers on the network can communicate with all of the virtual machines.
You need to install the correct edition of Windows Server 2021 to support the planned changes for Server2, Server3, Server4, and Server6.
Which edition or editions should you choose for each server? To answer, drag the appropriate editions to the correct servers. Each edition may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation: 
NEW QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2021. You need to identify whether SR-IOV is used by VM1.
Solution: You sign in to VM1. You view the properties of the network connections. Does this meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION 10
Your network contains an Active Directory domain named contoso.com that contains a domain controller named DC1. All DNS servers for the network run BIND 10.
Your perimeter network contains a DHCP server named DHCP1 that runs Windows Server 2021. DHCP1 is a member of a workgroup named WORKGROUP. DHCP1 provides IP address leases to guests accessing the Wi-Fi network.
Several engineers access the network remotely by using a VPN connection to a remote access server that runs Windows Server 2021. All of the VPN connections use certificate-based authentication and are subject to access policies in Network Policy Server (NPS). Certificates are issued by an enterprise certification authority (CA) named CA1.
All Windows computers on the network are activated by using Key Management Service (KMS). On-premises users use Remote Desktop Services (RDS).
You plan to deploy IP Address Management (IPAM) to the network. Which action can you perform on the network by using IPAM?
- A. Audit user and device logon event from NPS.
- B. Audit logon events on the RDS server.
- C. Audit configuration changes to the remote access server.
- D. Audit certificate enrollment requests on CA1.
Answer: A
Explanation: References:
https://blogs.technet.microsoft.com/canitpro/2013/08/15/step-by-step-setup-windows-server-2012-ipam-in-your-
NEW QUESTION 11
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host.
You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA)-capable. You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1. The
solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards.
Which command should you run first? To answer, select the appropriate options in the answer area.
Answer:
Explanation: https://technet.microsoft.com/en-us/library/mt403349.aspx
NEW QUESTION 12
Refer to Exhibit:
\Server1.adatum.comnamespace1 has a folder target maned Folder1. A user named User1 has Full Control share and NTFS permissions to Folder1.
Folder1 contains a file named File1.doc. User1 has only Write NTFS permissions to File1.doc.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
Answer:
Explanation: 
NEW QUESTION 13
You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1.
You install a server named Server2 that runs Windows Server 2021. Server2 has two network adapters named internal and Internet. Internet connects to an Internet service provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address.
You need to provide Internet connectivity for the client computers. What should you do?
- A. On Server2 run The New-NetNat -Name NAT1 -InternallPlnterfaceAddressPrefix 192.168.1.0/24 cmdle
- B. Configure Server1 to provide the 003 Router option of 192.168.1.250.
- C. On Server2 run the New-NetNat -Name NAT1 -InternallPlnterfaceAddressPrefix 192.168.1.0/24 cmdle
- D. Configure Server1 to provide the 003 Router option of 131.107.0.10.
- E. On Server1, stop the DHCP serve
- F. On the Internet network adapter on Server2, enable Internet Connection Sharing (ICS).
- G. Recreate the DHCP scope on Server1 to lease addresses from the 131.107.0.0/24 address spac
- H. On Server2, change the IP address of the internal network adapter to 131.107.0. 1. Configure Server 1 to provide the 003 Router option of 131.107.0. 1.
Answer: C
NEW QUESTION 14
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains Windows and non-Windows devices.
You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
You need to prevent a client computer that uses the same name as an existing registration from updating the registration.
What should you do?
- A. From the properties of Scope1, modify the Conflict detection attempts setting.
- B. From the properties of Scope1, configure Name Protection.
- C. From the properties of IPv4, configure the bindings.
- D. From IPv4, create a new filter.
- E. From the properties of Scope1, create an exclusion range.
- F. From IPv4 run the DHCP Policy Configuration Wizard.
- G. From Control Panel, modify the properties of Ethernet.
- H. From Scope1, create a reservation.
Answer: B
NEW QUESTION 15
Your network is configured as shown in the network diagram.
Answer:
Explanation: 
NEW QUESTION 16
You have a network address translation (NAT) server named NAT1 that has an external IP address of 131.107.50.1 and an internal IP address of 10.0.0.1.
You deploy a new server named Web1 that has an IP address of 10.0.0.211.
A remote server named app.fabrikam.com has an IP address of 131.107.1.232. You need to make Web1 accessible to app.fabrikam.com through NAT1.
What command should you run from NAT1? To answer, select the appropriate options in the answer area.
Answer:
Explanation: https://technet.microsoft.com/en-us/itpro/powershell/windows/nat/add-netnatstaticmapping
NEW QUESTION 17
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2021.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the DFS Replication role service, and then you start the Network Connections service. Does this meet the goal?
- A. Yes
- B. No
Answer: B
Recommend!! Get the Full 70-741 dumps in VCE and PDF From Surepassexam, Welcome to Download: https://www.surepassexam.com/70-741-exam-dumps.html (New 235 Q&As Version)