Cause all that matters here is passing exam with 70-741 exam. Cause all that you need is a high score of 70-741 exam. The only one thing you need to do is downloading 70-741 dumps free now. We will not let you down with our money-back guarantee.

Free 70-741 Demo Online For Microsoft Certifitcation:

NEW QUESTION 1
You have an Active Directory domain named Contoso.com. The domain contains Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. The Hyper-V hosts are configured to use NVGRE for network virtualization.
You have six virtual machines that are connected to an external switch. The virtual machines are configured as shown.
70-741 dumps exhibit
To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer area.
70-741 dumps exhibit

    Answer:

    Explanation: The GRE keys must match.
    To separate the traffic between the two virtualized networks, the GRE headers on the tunneled packets include a GRE Key that provides a unique Virtual Subnet ID for each virtualized network.
    References:
    https://blogs.technet.microsoft.com/keithmayer/2012/10/08/step-by-step-hyper-v-network-virtualization-31-days

    NEW QUESTION 2
    Scenario:
    You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
    70-741 dumps exhibit
    You install the Remote Access server role on Server2. Server2 has the following configured.
    *Network address translation (NAT)
    *The DHCP Server server role
    The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
    * Add 28 devices to subnet2 for a temporary project.
    * Configure Server2 to accept VPN connections from the internet.
    * Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
    End of Scenario:
    You add a computer to subnet1. The computer has an IP address of 10.10.0.129
    Web1 receives a request from the new computer and sends a response. What should you do?

    • A. 10.10.0.129
    • B. 10.10.0.224
    • C. 131.107.0.223
    • D. 172.16.128.222

    Answer: C

    NEW QUESTION 3
    You have a DHCP server named Server1.
    Server1 has an IPv4 scope that contains 100 addresses for a subnet named Subnet! Subnet1 provides guest access to the Internet. There are never more than 20 client computers on Subnet1 simultaneously; however, the computers that connect to Subnet 1 are rarely the same computers.
    You discover that some client computers are unable to access the network. The computers that have the issue have IP addresses in the range of 169.254.0.0/16.
    You need to ensure that all of the computers can connect successfully to the network to access the Internet. What should you do?

    • A. Create a new scope that uses IP addresses in the range of 169.254.0.0/16.
    • B. Modify the scope options.
    • C. Modify the lease duration.
    • D. Configure Network Access Protection (NAP) integration on the existing scope.

    Answer: C

    NEW QUESTION 4
    You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2021. IPAM1 manages 10 DHCP servers.
    You need to provide a user with the ability to track which clients receive which IP addresses from DHCP. The solution must minimize administrative privileges.

    • A. IPAM MSM Administrators
    • B. IPAM ASM Administrators
    • C. IPAM IP Audit Administrators
    • D. IPAM User

    Answer: C

    Explanation: References: https://technet.microsoft.com/en-us/library/jj878348(v=ws.11).aspx

    NEW QUESTION 5
    You have a remote access server named Server1 that runs Windows Server 2021. Server1 has DirectAccess enabled.
    You have a proxy server named Server2. All computers on the internal network connect to the Internet by using the proxy.
    On Server1, you run the command Set-DAClient -forceTunnel Enabled.
    You need to ensure that when a DirectAccess client connects to the network, the client accesses all the Internet resources through the proxy.
    What should you run on Server1?

    • A. Set-DnsClientNrptRule
    • B. Set.DANetworkLocationServer
    • C. Set-DAClient
    • D. Set-DAServer

    Answer: C

    NEW QUESTION 6
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
    After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
    You have a server named Server1 that has the Network Policy and Access Services server role installed. You create a Shared Secret Network Policy Server (NPS) template named Template1.
    You need to view the shared secret string used for Template1.
    Solution: From the Network Policy Server console, you view the properties of Template1. Does this meet the goal?

    • A. Yes
    • B. No

    Answer: B

    NEW QUESTION 7
    You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2021.
    You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses.
    You discover that unauthorized computers can obtain an IP address from Server1.
    You need to ensure that only authorized computers can receive an IP address from Server1. Solution: You run the following command.
    Add-DHCPServer4Filter -ComputerName Server1 -MacAddress -List Allow Does this meet the goal?

    • A. Yes
    • B. No

    Answer: A

    Explanation: References:
    https://docs.microsoft.com/en-us/powershell/module/dhcpserver/add-dhcpserverv4filter?view=win10-ps

    NEW QUESTION 8
    Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host named Server1 that runs Windows Server 2021.
    Server1 hosts four machines that are members of the domains. The virtual machines are configured as sown in the following table.
    70-741 dumps exhibit
    Which virtual machines can you manage by using PowerShell Direct?

    • A. Only VM2
    • B. VM1, VM2, and VM4
    • C. only VM4
    • D. VM1, VM2, and VM3

    Answer: B

    NEW QUESTION 9
    You have Hyper-V host named Server1.
    Server1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10 Gbps and has an IPv4 address.
    Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors. You need to distribute the network processing load across the VM1 processors.
    What should you do?

    • A. From Device Manager on Server1, configure TCP Checksum Offload (IPv4).
    • B. From Device Manager on VM1, configure TCP Checksum Offload (IPv4).
    • C. From Device Manager on VM1, configure Receive Side Scaling.
    • D. From Windows PowerShell on Server1, run the Enable-NetAdapterRSS cmdlet.

    Answer: C

    NEW QUESTION 10
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
    Refer to exhibit:
    70-741 dumps exhibit
    Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private VM2 has two network adapters.
    You need to ensure that VM1 connects to the corporate network by using NAT.
    Solution: You connect VM2 to private1 and External1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on VM2. You configure VM1 to use VM2 as the default gateway.
    Does this meet the goal?

    • A. Yes
    • B. No

    Answer: B

    NEW QUESTION 11
    Your network contains an Active Directory domain named contoso.com. The domain contains a domain-based Distributed File System (DFS) namespace named Namespace1.
    You need to view the shares to which users will be redirected when the users attempt to connect to a folder named Folder1 in the DFS namespace.
    What cmdlet should you run? To answer, select the appropriate options in the answer area.
    70-741 dumps exhibit

      Answer:

      Explanation: 70-741 dumps exhibit

      NEW QUESTION 12
      Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021.
      You install IP Address Management (IPAM) on Server1. You select the automatic provisioning method, and then you specify a prefix of IPAM1.
      Which cmdlet should you run? To answer, select the appropriate options in the answer area.
      70-741 dumps exhibit

        Answer:

        Explanation: Invoke-IpamGpoProvisioning –Domain contoso.com –GpoPrefixName IPAM –IpamServerFqdn dc1.contoso.com

        NEW QUESTION 13
        Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
        Refer to exhibit:
        70-741 dumps exhibit
        Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private VM2 has two network adapters.
        You need to ensure that VM1 connects to the corporate network by using NAT.
        Solution: You connect VM1 to Internal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use VM2 as the default gateway.
        Does this meet the goal?

        • A. Yes
        • B. No

        Answer: A

        NEW QUESTION 14
        You have a server named Server1 that runs Windows Server 2021 and is configured as a domain controller.
        You install the DNS Server server role on Server1.
        You plan to store a DNS zone in a custom Active Directory partition. You need to create a new Active Directory partition for the zone. What should you use?

        • A. Set-DnsServer
        • B. DNS Manager
        • C. New-ADObject
        • D. Ntdsutil.exe
        • E. Active Directory Sites and Services

        Answer: B

        Explanation: References:
        https://www.businessnewsdaily.com/11019-set-up-configure-dns-on-windows-server-2021.html

        NEW QUESTION 15
        You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is configured as shown in the following exhibit.
        70-741 dumps exhibit
        Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.
        70-741 dumps exhibit

          Answer:

          Explanation: 70-741 dumps exhibit

          NEW QUESTION 16
          You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is configured as shown in the following exhibit.
          70-741 dumps exhibit
          Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.
          70-741 dumps exhibit

            Answer:

            Explanation: 70-741 dumps exhibit

            NEW QUESTION 17
            You have an IP Address Management (IPAM) server named IPAM1 that runs Window Server 2021. IPAM1 manages all of the DHCP servers on your network.
            You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.
            You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
            Solution: From Windows PowerShell, you run the Invoke-IpamServerProvisioning cmdlet.
            Does this meet the goal?

            • A. Yes
            • B. No

            Answer: B

            Explanation: References:
            https://docs.microsoft.com/en-us/powershell/module/ipamserver/invoke-ipamserverprovisioning?view=win10-p

            Thanks for reading the newest 70-741 exam dumps! We recommend you to try the PREMIUM 2passeasy 70-741 dumps in VCE and PDF here: https://www.2passeasy.com/dumps/70-741/ (235 Q&As Dumps)