we provide Guaranteed Microsoft AZ-120 free exam questions which are the best for clearing AZ-120 test, and to get certified by Microsoft Planning and Administering Microsoft Azure for SAP Workloads. The AZ-120 Questions & Answers covers all the knowledge points of the real AZ-120 exam. Crack your Microsoft AZ-120 Exam with latest dumps, guaranteed!

Free AZ-120 Demo Online For Microsoft Certifitcation:

NEW QUESTION 1

You plan to deploy SAP application servers that run Windows Server 2016.
You need to use PowerShell Desired State Configuration (DSC) to configure the SAP application server once the servers are deployed.
Which Azure virtual machine extension should you install on the servers?

  • A. the Azure DSC VM Extension
  • B. the Azure virtual machine extension
  • C. the Azure Chef extension
  • D. the Azure Enhanced Monitoring Extension for SAP

Answer: A

Explanation:
The Azure Desired State Configuration (DSC) VM Extension is updated as-needed to support enhancements and new capabilities delivered by Azure, Windows Server, and the Windows Management Framework (WMF) that includes Windows PowerShell.
References:
https://docs.microsoft.com/en-us/powershell/scripting/dsc/getting-started/azuredscexthistory

NEW QUESTION 2

You are migrating SAP to Azure. The ASCS application servers are in one Azure zone, and the SAP database server in in a different Azure zone. ASCS/ERS is configured for high availability.
During performance testing, you discover increased response times in Azure, even though the Azure environment has better computer and memory configurations than the on-premises environment. During the initial analysis, you discover an increased wait time for Enqueue.
What are three possible causes of the increased wait time? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

  • A. a missing Enqueue profile
  • B. disk I/O during Enqueue backup operations
  • C. misconfigured load balancer rules and health check probes for Enqueue and ASCS
  • D. active Enqueue replication
  • E. network latency between the database server and the SAP application servers

Answer: CDE

Explanation:
E: The network latency across Availability Zones is not the same in all Azure regions. In some cases, you can deploy and run the SAP application layer across different zones because the network latency from one zone to the active DBMS VM is acceptable. But in some Azure regions, the latency between the active DBMS VM and the SAP application instance, when deployed in different zones, might not be acceptable for SAP business processes.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/workloads/sap/sap-ha-availability-zones

NEW QUESTION 3

You are deploying an SAP production landscape to Azure.
Your company’s chief information security officer (CISO) requires that the SAP deployment complies with ISO 27001.
You need to generate a compliance report for ISO 27001. What should you use?

  • A. Azure Security Center
  • B. Azure Log Analytics
  • C. Azure Active Directory (Azure AD)
  • D. Azure Monitor

Answer: A

NEW QUESTION 4

You have an SAP production landscape on-premises and an SAP development landscape on Azure.
You deploy a network virtual appliance to act as a firewall between the Azure subnet and the on-premises network.
Solution: You configure route filters for Microsoft peering. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 5

You need to ensure that you can receive technical support to meet the technical requirements. What should you deploy to Azure?

  • A. SAP Landscape Management (LaMa)
  • B. SAP Gateway
  • C. SAP Web Dispatcher
  • D. SAPRouter

Answer: A

Explanation:
Scenario: Ensure that SAP can provide technical support for all the SAP landscapes deployed to Azure. References:
https://blogs.sap.com/2019/07/22/sap-landscape-management-on-microsoft-azure-part-1/

NEW QUESTION 6

A customer has an on-premises SAP environment. The customer plans to migrate SAP to Azure.
You need to prepare the environment for the planned migration.
Which three actions should you perform in sequence before the migration? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
AZ-120 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-120 dumps exhibit

NEW QUESTION 7

You have ah SAP environment on Azure that contains a single-tenant SAP NANA server at instance 03. You need to monitor the network throughput from an SAP application server to the SAP HANA server. How should you complete the script? To answer, select the appropriate options in the answer are. NOTE: Each correct selection is worth one point.
AZ-120 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-120 dumps exhibit

NEW QUESTION 8

You have a large and complex SAP environment on Azure.
You are designing a training landscape that will be used 10 times a year.
You need to recommend a solution to create the training landscape. The solution must meet the following requirements:
AZ-120 dumps exhibit Minimize the effort to build the training landscape.
AZ-120 dumps exhibit Minimize costs.
In which order should you recommend the actions be performed for the first training session? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
AZ-120 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/workloads/sap/planning-guide

NEW QUESTION 9

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You plan to migrate an SAP HANA instance to Azure.
You need to gather CPU metrics from the last 24 hours from the instance. Solution: You use DBA Cockpit from SAP GUI.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

Explanation:
The SAP HANA cockpit provides a single point of access to a range of SAP HANA administration and monitoring tasks. It is used to monitor and ensure the overall health of the system.
The HANA Monitoring dashboard also visualizes key HANA Metrics of SAP HANA system. References:
https://developers.sap.com/tutorials/dt-monitoring-hana-part1.html
https://help.sap.com/viewer/afa922439b204e9caf22c78b6b69e4f2/2.10.0.0/en-US https://www.hanatutorials.com/p/hana-monitoring-dashboard.html

NEW QUESTION 10

A company named Contoso, Ltd. has users across the globe. Contoso is evaluating whether to migrate SAP to Azure.
The SAP environment runs on SUSE Linux Enterprise Server (SLES) servers and SAP HANA databases. The Suite on HANA database is 4 TB.
You need to recommend a migration solution to migrate SAP application servers and the SAP HANA databases. The solution must minimize downtime.
Which migration solutions should you recommend? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-120 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: Azure Site Recovery
Microsoft Azure Site Recovery (ASR) now supports SUSE Linux Enterprise Server 11 SP3/SP4 and SUSE Linux Enterprise Server 12 SP1/SP2/SP3. This is great for customers that are planning to migrate systems to Microsoft Azure or customers who need to have a business continuity strategy for their Azure deployments.
Azure Site Recovery enables SUSE customers to migrate their non-Azure virtual machines or physical servers to Microsoft Azure virtual machines.
Box 2: System Copy for SAP Systems
In order to migrate an existing SAP HANA system into Azure, a SAP homogeneous system copy can be performed.
Reference: https://www.suse.com/c/asr_supports_suse/ https://www.netapp.com/us/media/tr-4746.pdf

NEW QUESTION 11

You need direct connectivity from an on-premises network to SAP HANA (Large Instances). The solution must
meet the following requirements:
AZ-120 dumps exhibit Minimize administrative effort.
AZ-120 dumps exhibit Provide the highest level of resiliency. What should you use?

  • A. ExpressRoute Global Reach
  • B. Linux IPTables
  • C. ExpressRoute
  • D. NGINX as a reverse proxy

Answer: C

Explanation:
The Azure network functionality used is:
Azure virtual networks are connected to the ExpressRoute circuit that connects to your on-premises network assets.
An ExpressRoute circuit that connects on-premises to Azure should have a minimum bandwidth of 1 Gbps or higher. This minimal bandwidth allows adequate bandwidth for the transfer of data between on-premises systems and systems that run on VMs. It also allows adequate bandwidth for connection to Azure systems from on-premises users.
All SAP systems in Azure are set up in virtual networks to communicate with each other. References:
https://docs.microsoft.com/en-us/azure/virtual-machines/workloads/sap/hana-network-architecture

NEW QUESTION 12

You deploy an SAP environment on Azure.
Your company has a Service Level Agreement (SLA) of 99.99% for SAP. You implement Azure Availability Zones that have the following components:
* Redundant SAP application servers
* ASCS/ERS instances that use a failover cluster
* Database high availability that has a primary instance and a secondary instance
You need to validate the load distribution to the application servers. What should you use?

  • A. SAP Solution Manager
  • B. Azure Monitor
  • C. SAPControl
  • D. SAP Web Dispatcher

Answer: D

Explanation:
Load balancers. These are used to distribute traffic to virtual machines in the application-tier subnet. For high availability, use the built-in SAP Web Dispatcher, Azure Load Balancer, or network appliances, depending on the traffic type (such as HTTP or SAPGUI) or the required network services, such as Secure Sockets Layer (SSL) termination.
Reference:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/sap/sap-netweaver

NEW QUESTION 13

You have an Azure Availability Set that is configured as shown in the following exhibit.
AZ-120 dumps exhibit
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
AZ-120 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: the same fault domain
Fault domains define the group of virtual machines that share a common power source and network switch. If a storage fault domain fails due to hardware or software failure, only the VM instance with disks on the storage fault domain fails.
Box 2: managed disks
Managed disks provide better reliability for Availability Sets by ensuring that the disks of VMs in an Availability Set are sufficiently isolated from each other to avoid single points of failure. It does this by automatically placing the disks in different storage fault domains (storage clusters) and aligning them with the VM fault domain.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/manage-availability

NEW QUESTION 14

You need to connect SAP HANA on Azure (Large Instances) to an Azure Log Analytics workspace.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
AZ-120 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Step 1: Install the Azure Enhanced Monitoring.
The SAP Azure Enhanced Monitoring Extension allows for collecting diagnostic data including OS and Application performance counters from Azure VMs running SAP workloads.
Step 2: Install the Log Analytics client on the SAP HANA on Azure (Large Instances) instance. Step 3: Configure a Log Analytics gateway on the virtual network.
Step 4: On the gateway, run. References:
http://www.deployazure.com/compute/virtual-machines/sap-azure-enhanced-monitoring-extension/
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/gateway

NEW QUESTION 15

Your on-premises network contains SAP and non-SAP applications.
You have JAVA-based SAP systems that use SPNEGO for single-sign on (SSO) authentication. Your external portal uses multi-factor authentication (MFA) to authenticate users.
You plan to extend the on-premises authentication features to Azure and to migrate the SAP applications to Azure.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
AZ-120 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: No
Need AD FS for MFA. See box 3.
Note: Azure Active Directory (Azure AD) Pass-through Authentication allows your users to sign in to both on-premises and cloud-based applications using the same passwords. This feature is an alternative to Azure AD Password Hash Synchronization (see Box 2).
Box 2: Yes
Password hash synchronization is one of the sign-in methods used to accomplish hybrid identity. Azure AD Connect synchronizes a hash, of the hash, of a users password from an on-premises Active Directory instance to a cloud-based Azure AD instance.
Password hash synchronization is an extension to the directory synchronization feature implemented by Azure AD Connect sync. You can use this feature to sign in to Azure AD services like Office 365. You sign in to the service by using the same password you use to sign in to your on-premises Active Directory instance.
Box 3: Yes
If your organization is federated with Azure AD, you can use Azure Multi-Factor Authentication to secure AD FS resources, both on-premises and in the cloud. Azure MFA enables you to eliminate passwords and provide a more secure way to authenticate.
References:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/whatis-phs
https://docs.microsoft.com/en-us/windows-server/identity/ad-fs/operations/configure-ad-fs-and-azure-mfa

NEW QUESTION 16

You have an on-premises SAP environment that runs on SUSE Linux Enterprise Server (SLES) servers and Oracle. The version of the SAP ERP system is 6.06 and the version of the portal is SAP NetWeaver 7.3.
You need to recommend a migration strategy to migrate the SAP ERP system and the portal to Azure. The solution must be hosted on SAP HANA.
What should you recommend? To answer, drag the appropriate tools to the correct components. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
AZ-120 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: Software Update Manager (SUM) Database Migration option (DMO) with System Update The SAP ERP system is 6.06.
Box 2: Software Update Manager (SUM) Database Migration option (DMO) without System Update The portal is SAP NetWeaver 7.3.
SAP ERP portal migrate azure Software update manager database Reference:
https://blogs.sap.com/2017/10/05/your-sap-on-azure-part-2-dmo-with-system-move/

NEW QUESTION 17

You have an SAP environment that contains the following components:
* Enhancement Package 6 for SAP ERP Central Component 6.0 (SAP ECC 6.0)
* Servers that runs SUSE Linux Enterprise Server 12 (SIES 12)
* Databases on IBM D82 10.5
* SAP Solution Manager 7.1
You plan to migrate the SAP environment to Azure.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
AZ-120 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: Yes
Box 2: No
Upgrade to ECC 7.01 or later. Box 3: No
With Microsoft Azure, you can migrate your existing SAP application running on IBM Db2 for Linux, UNIX, and Windows (LUW) to Azure virtual machines. With SAP on IBM Db2 for LUW, administrators and developers can still use the same development and administration tools, which are available on-premises.
Reference:
https://docs.microsoft.com/en-us/azure/data-factory/connector-sap-table https://docs.microsoft.com/en-us/azure/virtual-machines/workloads/sap/dbms_guide_ibm

NEW QUESTION 18

You are deploying SAP Fiori lo an SAP environment on Azure.
You are configuring SAML 2.0 for an SAP Fiori instance named FPP that uses client 100 to authenticate to an Azure Active Directory (Azure AD) tenant.
Which provider name should you use to ensure that the Azure AD tenant recognizes the SAP fiori instance?

  • A. ldap://FPP
  • B. https://FPP
  • C. ldap://FPP-100
  • D. https://FPP100

Answer: D

Explanation:
By default, the provider name is in the format <sid><client>. Azure AD expects the name in the format
<protocol>://<name>. We recommend that you maintain the provider name as https://<sid><client> so you can configure multiple SAP Fiori ABAP engines in Azure AD.
Example:
AZ-120 dumps exhibit
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/saas-apps/sap-fiori-tutorial

NEW QUESTION 19

You deploy an SAP environment on Azure.
Your company has a Service Level Agreement (SLA) of 99.99% for SAP. You implement Azure Availability Zones that have the following components: Redundant SAP application servers
ASCS/ERS instances that use a failover cluster
Database high availability that has a primary instance and a secondary instance You need to validate the high availability configuration of the ASCS/ERS cluster. What should you use?

  • A. SAP Web Dispatcher
  • B. Azure Traffic Manager
  • C. SAPControl
  • D. SAP Solution Manager

Answer: B

Explanation:
C: You can use SAPControl to start or stop an SAP system from the command line. References:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/sap/sap-netweaver

NEW QUESTION 20

You have an Azure alert rule and action group as shown in the following exhibit.
AZ-120 dumps exhibit
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
AZ-120 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-120 dumps exhibit

NEW QUESTION 21

Your company has a an on-premises SAP environment.
Recently, the company split into two companies named Litware, inc and Contoso.Ltd. Litware retained the SAP environment.
Litware plans to export data that is relevant only to Contoso. The export will be 1.5 TB. Contoso build a new SAP environment on Azure.
You need to recommend a solution for Litware to make the data available to Contoso in Azure. The solution
must meet the following requirements: Minimize the impact on the network. Minimize the administrative effort for Litware.
What should you include in the recommendation.

  • A. Azure Migrate
  • B. Azure Databox
  • C. Azure Site Recovery
  • D. Azure import/Export service

Answer: C

NEW QUESTION 22
......

P.S. Easily pass AZ-120 Exam with 108 Q&As Exambible Dumps & pdf Version, Welcome to Download the Newest Exambible AZ-120 Dumps: https://www.exambible.com/AZ-120-exam/ (108 New Questions)