Realistic HP HPE0-S54 Braindumps Online

NEW QUESTION 1
A customer is considering installing a Synergy frame in an existing rack where their c7000 chassis is currently installed.
Which question should you ask to ensure the new frame will be supported in the rack?

• A. Are there any third party servers installed?
• B. How deep is the existing rack?
• C. Is there a UPS installed in the rack?
• D. How wide is the existing rack?

Answer: B

NEW QUESTION 2
You are developing a proposal for a new HPE customer that is concerned about managing mixed server vendors in their environment.
Which feature should you highlight in your proposal to address the customer’s concern?

• A. Redfish API
• B. OneView RESTful API
• C. Intelligent Provisioning
• D. System Management Homepage

Answer: A

NEW QUESTION 3
A customer needs a new compute environment based on HPE Synergy with VMware vSphere 6.5. This needs to interact with the customer’s exiting network consisting of 300 independent global sites. Each site has 15 unique VLANs. What network technologies would you recommend to meet the customer requirements?

• A. NVGRE increasing the amount of separated Layer 2 segments
• B. VxLAN as it allows flexibility and suitable for multitenant environment
• C. RDMA as it increases host efficiency and virtualization performance
• D. VLANs as it supports up to 4094 VLAN ids

Answer: B

NEW QUESTION 4
A customer temporarily needs to add an additional network connection to a provisioned server that is being actively managed by OneView. The server is currently powered down. Which top level option should they click as the first step?

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 5
A customer asks for a network technology that will maximize throughput and minimize latency and CPU utilization across servers using SMB Direct and 10Gb Ethernet.
Which technology should you propose?

• A. TCP/IP Offload Engine
• B. RDMA
• C. virtual extensible LAN (VXLAN)
• D. InfiniBand

Answer: B

NEW QUESTION 6
A customer needs to update the system bios on their DL380 Gen10. They are unable to download the latest Service Pack for ProLiant.
What is the most likely cause of the problem?

• A. Embedded remote support is not enabled on that server
• B. There is no valid SAID contract associated with their HPE passport
• C. The maximum number of servers supported by the agreement has been exceeded
• D. An iLO5 Advanced Premium Security Edition license has not been installed

Answer: B

NEW QUESTION 7
A customer is looking to add StoreVirtual VSA to their HPE Synergy environment. Which questions should you ask to ensure success?

• A. Is there adequate rack space for expansion?
• B. Which servers are currently being utilized?
• C. Is fiber channel or iSCSI being utilized?
• D. Which applications are running?

Answer: D

NEW QUESTION 8
A customer wants to use the automated zoning feature of HPE OneView. A customer complains that this functionality does not work, even if 3PAR and CPGs are added to HPE OneView.
Which other steps must be performed before automated zoning can be used? (Choose two.)

• A. Enable Data Center Bridging functionality on VC modules
• B. Apply extended FC licenses to Virtual Connect downlink ports using HPE OneView
• C. Activate WBEM Providers on supported 3Par arrays
• D. Add the supported SAN Manager to HPE OneView
• E. Associate managed SANs with a FC or FCoE network

Answer: DE

NEW QUESTION 9
Match each HPE technology solution to the customer’s business need that it can fulfill.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
HPE ConvergedSystems 500 – Mission Critical workloads
HPE D2220sb Storage Blade – Dedicated storage with a one-to-one server-to-storage ratio
HPE SB3000c Tape Blade – One button Disaster Recovery
HPE SimpliVity – High Availability & Disaster Recovery

NEW QUESTION 10
You are configuring a new server for a customer. The customer has given you the following information regarding their environment:
2 processors with 22 cores
256GB RAM
600GB of usable internal storage
10GB network, dual connections
iLO Advanced
3 years of 7x24 basic support
Which additional information do not need to determine the best option for internal storage?

• A. Does the application require a large memory footprint
• B. Does the application require RoCE capable adapters?
• C. Is the application workload sensitive to I/O latency?
• D. Will a Fibre Channel card be required?

Answer: C

NEW QUESTION 11
A customer has a ProLiant DL based Gen10 server solution hosting an I/O intensive 2TB database. The customer needs to dramatically increase the performance of their existing system.
Which solution will provide the maximum performance possible for their application?

• A. Install HPE Scalable Persistent Memory
• B. Move the OS to an M.2 SSD drive
• C. Upgrade the current processor to a Xeon-Platinum
• D. Install DD4 Smart Memory

Answer: A

NEW QUESTION 12
A customer is considering deploying a significant number of HPE BladeSystem Gen10 servers with an HPE 3Par storage solution for a new cloud solution. You propose HPE OneView as the management platform.
Which HPE OneView feature should you emphasize during conversations with the customer?

• A. patch deployment for operating system and storage components
• B. operating system deployment through Image Streamer
• C. servers and storage firmware upgrades
• D. volume presentation from the 3Par and automated zoning

Answer: D

NEW QUESTION 13
Your customer has 500 SY480 Gen10 compute nodes running a variety of physical and virtual workloads. They are looking for a way to get a unified view of the entire environment.
Which product should you recommend?

• A. HPE OneView for VMware vCenter
• B. HPE OneView Global Dashboard
• C. HPE OneView for Microsoft System Center
• D. HPE OneView for Red Hat Enterprise Virtualization

Answer: B

NEW QUESTION 14
What is required to enable Jitter Smoothing technology? (Choose two.)

• A. HPE Apollo
• B. ProLiant Gen 10
• C. HPE Synergy
• D. HPE Cloudline
• E. iLO5 Advanced

Answer: BE

NEW QUESTION 15
A customer needs to install Red Hat 7.2 on a few DL380 Gen10 systems. Which tool should be used for this deployment?

• A. Image Streamer
• B. Intelligent Provisioning
• C. OneView
• D. Insight Control server provisioning (ICsp)

Answer: B

NEW QUESTION 16
A customer has a two frame Synergy setup with two Virtual Connect SE 40Gb F8 modules and two 20Gb Interconnect Link Module interconnect modules. The customer needs to expand into a third frame.
Which interconnect modules should be used to extend the logical enclosure?

• A. 2 x 20Gb Interconnect Link Modules
• B. 1 x Virtual Connect SE 40Gb F8 Interconnect Link Modules and 1 x 20Gb Interconnect Link Modules
• C. 2 x Virtual Connect SE 40Gb F8 Interconnect Link Modules
• D. 4 x Virtual Connect SE 40Gb F8 Interconnect Link Modules

Answer: A

NEW QUESTION 17
A customer uses VLANs in their network. They recently acquired another company and need to extend the number of VLANs to 7400 to accommodate the growth. What should you advise?

• A. Implement an IPv6 only environment
• B. Edit the /etc/network/config file, and set VLAN_LIMIT=7401
• C. Upgrade the NICs to models that support RoCE
• D. Transition to a VXLAN or NVGRE network configuration

Answer: D

NEW QUESTION 18
A customer needs a solution to support Online Transaction Processing (OLTP) and database workloads. Which Gen10 technology would optimize the environment for the customer?

• A. REST API
• B. Silicon Root of Trust
• C. workload profiles
• D. OneView

Answer: C

NEW QUESTION 19
Which product automatically generates reports on collected lifecycle management events?

• A. HPE ONEView Global Dashboard
• B. HPE OneView
• C. Insight Online
• D. Insight Control

Answer: C

NEW QUESTION 20
A customer wants to implement HPE Synergy with 20Gb connectivity.
What should an architect emphasize during a meeting with this customer?

• A. A maximum of 3 frames can be stacked together when 20 Gb connectivity is required.
• B. SAS connectivity will be supported only on third fabric.
• C. A Composer must be installed in each frame.
• D. 20Gb connectivity will require additional licenses applied to the downlink ports.

Answer: A

NEW QUESTION 21
A customer needs a Synergy solution using Image Streamer in a production environment. What is the minimum number of Synergy frames needed for this solution?

• A. 5
• B. 2
• C. 3
• D. 1

Answer: C

NEW QUESTION 22
A customer received their three frame Synergy system. However, they are missing a link cable that connects the frame link module between the frames.
Which type of cable do they need?

• A. DAC
• B. MPO
• C. CAT6A
• D. AOC

Answer: A

NEW QUESTION 23
A customer is experiencing high latency in an Apollo r2200 Gen9 SFF system. They want to upgrade performance with new units.
Which servers in the Apollo line will increase performance while maintaining similar architecture? (Choose two.)

• A. Apollo 6000 Gen10
• B. Apollo r2800 Gen10
• C. Apollo 4510 Gen10
• D. Apollo r2200 Gen10
• E. Apollo r2600 Gen10

Answer: BE

NEW QUESTION 24
......