Renewal HPE0-S60 Free Practice Exam For Delta - HPE Compute Solutions Certification

NEW QUESTION 1
Your customer plans to expand an existing nPar based on a single HPE Superdome Flex chassis. Which statement about workload availability during expansion is true?

• A. Powered nPar can be expanded only if HPE Superdome Flex 280 is used
• B. Online expansion is available only if RMC is used for management.
• C. HPE Superdome Flex does not support expansion of powered on nPars
• D. Powered nPar can be expanded if it does not use HPE Persistent Memory

Answer: C

NEW QUESTION 2
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?

• A. If HPE OneView credentials are added in vCenter Server
• B. If an compute nodes are added to the vCenter Server
• C. If the HPE Oneview instance Is integrated with HPE OV4VC.
• D. If vCenter Server is licensed in the HPE Oneview interface

Answer: B

NEW QUESTION 3
Your customer is implementing an HPE Synergy solution based on three frames. Click each of the ports that can be used to connect satellite modules.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 4
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView. Put the steps to achieve this goal into the coned order in the answer area on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 5
Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards
They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards Which statement about the planned configuration change is true?

• A. Four compute modules must be moved to the second frame to balance the configuration
• B. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
• C. A license for an extended logical enclosure must be added to HPE OneView through GUI
• D. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked

Answer: D

NEW QUESTION 6
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280. Which statement about these two systems is true?

• A. Only HPE Superdome Rex 280 can be managed using HPE OneView
• B. Only HPE Superdome Flex supports HPE Persistent Memory
• C. Only HPE Superdome Flex 280 can support multiple nPars
• D. Only HPE Superdome Flex supports 32 sockets and 48TB of memory

Answer: A

NEW QUESTION 7
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays
Where should you start the troubleshooting process?

• A. At the iLO interface to verify whether the ILO Advanced license is properly applied
• B. At HPE OneView Interface to verify whether the server is In the maintenance mode
• C. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
• D. At HPE OneView Interface to verify whether the iLO processor is disabled

Answer: A

NEW QUESTION 8
As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2
Why would you recommend this change?

• A. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
• B. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
• C. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
• D. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort

Answer: B

NEW QUESTION 9
What is a restriction of using a RoCE network?

• A. It is by default configured as an untagged network and cannot be a part of a network set.
• B. It does not support Private VLAN and Multicast VLAN.
• C. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
• D. It does not support smart link and private network features.

Answer: A

NEW QUESTION 10
Your customer plans to manage HPE Primera using HPE Oneview
Which storage management tasks can be completed using HPE OneView for this environment?

• A. CPG management
• B. Volume provisioning
• C. Cache management
• D. Replication setup

Answer: B

NEW QUESTION 11
Which compute node parameters are captured within server hardware type?

• A. Number of the CPUs
• B. installed operating system
• C. Mezzanine card configuration
• D. Size of the memory Installed

Answer: B

NEW QUESTION 12
Match each HPE OneView network type with its definition.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 13
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 14
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames
How will this change impact the customer environment?

• A. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
• B. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
• C. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
• D. The customer can add a new logical enclosure to an existing setup once all required licenses are addedlo HPE OneView and associated with the new frames.

Answer: A

NEW QUESTION 15
Click the drop-down menu that will allow you to define the location of the master modules within the logical interconnect group.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 16
......